I have a 1985 Yanmar 18 hp 3cyll diesel tractor it looks just like that, xcept two wheel drive. That is the best little tractor, we have a 48" belly finish cut pto driven mower deck & turf tires, its been flooded twice with no damage, has a serious case of industrial disease, came through no problems, we used to go through riding mowers every 5 yrs or so for our 3 acres wear them right out. This thing is indestructible. Really nice job on the restore.
You did a very nice job fixing and restoring things back to factory. I didn't have any mouse nest in mine but I did the same as you pulling the tank, replacing all fuel lines and getting everything loosened up and working correctly. It wasn't needed but I put a clear fuel filter right below the injection pump while fixing things up. Glad to see you used Corbin clamps on the lines. The brakes were freezing up but they were easy to pull apart and get working like new again. Put new fuel filter bowl and the little tank by the valve cover. Adjusted valves and changed all fluids and thermostat. Mine has power steering so it has the hydraulic filter by the rear axle. Now I'm putting all hoses on the 67 loader. It's not the fastest, easiest to use tractor on my farm but it's built to last. Mine has turf tires and I found new chains for the front tires for $2 at a yard sale. Fit perfect. 7 foot rear blade works great on the snow. I do have the 5 front weights too. Yes, put a better oil filter on. I use NAPA Gold. A great part supplier is Hoye Tractor. com.. Hope you keep and enjoy that nice tractor on the farm. Oppps, time to listen to my President. Yeaaaaa.
@@Morpheen999 The owner said it had sat inside, but by the rust and sun-bleaching on plastic components I'd guess it spent a good decade outside before someone moved it into the barn.
We just bought an '85 850 4x4 with power steering and a loader. It was left outside its entire life and was beat on, but we just finished replacing all the oils/fluids and filters and fixed some wiring (a few lights didn't work). Everything mechanical/electrical is 100% now, but two things are still on our list to fix or replace: the grille (headlights work, but it looks like the grille was tortured) and the vertical exhaust (has holes in it). Can't find a source for either. We'll run it as is, but it'd be nicer if those two things were replaced.
Unreal!!!! What a nice find. I hope that after all the repairs that you are still money ahead. It looks nice and since you brought everything up to date, it should last a long time. My Mom is 88 and recently I moved in to help her. She has a John Deere 2305 and it is about 16 years old. It has only 100 hours on it but l put another 50 hours on it this last summer. She bought it for my Dad before he died and it sat a long time not being used.
I guess im randomly asking but does someone know of a way to get back into an Instagram account? I was stupid forgot my account password. I appreciate any help you can give me
@Lance Carl thanks so much for your reply. I got to the site through google and im trying it out atm. Seems to take a while so I will reply here later when my account password hopefully is recovered.
Nice to see someone restoring these. It was a lot of work but now you've got something. I would recommend using an acetylene torch with a rosebud tip to heat any rusted threaded areas etc. They often can be turned by hand afterward. Also, with heat you can straighten the weight bracket and then weld a piece to reinforce it. How much did you have to pay for this?
Nice job! I have a 750 I'm working on. Did you restore the hydrualic system? My control valve is pretty worn and I need to get a rebuilt one - haven't found one yet..
Nice Job. Tractor looks great. Curious what type paint you used. Rattle can or shot out of a spray gun. I just bought an 850 that's spent most of it's life stored outside and needs some paint work.
Do you know what aftermarket seat is on your 750 tractor? I tried a vevor brand seat and i sit so high my head is above the ROPS. Also do you have any issue with the seat springs being super soft?
Great video bud, I just made a offer on one in good working shape for 4,500, is that a good price?? Also if I get it I would like to get a bucket for it, have you considered that? Thanks
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 13](http://i.ytimg.com/vi/NlY2uzrALY8/mqdefault.jpg)
I have a 1985 Yanmar 18 hp 3cyll diesel tractor it looks just like that, xcept two wheel drive. That is the best little tractor, we have a 48" belly finish cut pto driven mower deck & turf tires, its been flooded twice with no damage, has a serious case of industrial disease, came through no problems, we used to go through riding mowers every 5 yrs or so for our 3 acres wear them right out. This thing is indestructible. Really nice job on the restore.
@@thesmallenginekid - As far as I know this one is a Yanmar with John Deere colors!
That 750 would be an awesome little tractor to own. It gives an idea of what tractor I would like to own.
You did a very nice job fixing and restoring things back to factory. I didn't have any mouse nest in mine but I did the same as you pulling the tank, replacing all fuel lines and getting everything loosened up and working correctly. It wasn't needed but I put a clear fuel filter right below the injection pump while fixing things up. Glad to see you used Corbin clamps on the lines. The brakes were freezing up but they were easy to pull apart and get working like new again. Put new fuel filter bowl and the little tank by the valve cover. Adjusted valves and changed all fluids and thermostat. Mine has power steering so it has the hydraulic filter by the rear axle. Now I'm putting all hoses on the 67 loader. It's not the fastest, easiest to use tractor on my farm but it's built to last. Mine has turf tires and I found new chains for the front tires for $2 at a yard sale. Fit perfect. 7 foot rear blade works great on the snow. I do have the 5 front weights too. Yes, put a better oil filter on. I use NAPA Gold. A great part supplier is Hoye Tractor. com.. Hope you keep and enjoy that nice tractor on the farm. Oppps, time to listen to my President. Yeaaaaa.
You can be proud of the work you did. Very nice job indeed.
She looks great now. Good job.
There good little tractors that cover over wiring, leave it off mice just love it in there! Had them in mine.
Beautiful! All things considered, it was in great shape when you found it.
it looked like it was in great shape, but then he started telling us what he did with it and...I guess 27 years does something to it
@@kirdot2011 Unless its climate controlled, any machine sitting that long will develop some issues
@@Morpheen999 The owner said it had sat inside, but by the rust and sun-bleaching on plastic components I'd guess it spent a good decade outside before someone moved it into the barn.
Nice work, looks very respectable
That is a nice tractor to have!!
Super nice. I habe a 650. They are tough little tractors.
You did a good job keep up the good work
You’ve put a lot of hours in to it and money hope you got it cheap ,looks good now ,be handy round a small property ,old jimmy Australia
I see a lot more work needs done but what you have done so far is nice. A great find.
That looks really good
We just bought an '85 850 4x4 with power steering and a loader. It was left outside its entire life and was beat on, but we just finished replacing all the oils/fluids and filters and fixed some wiring (a few lights didn't work). Everything mechanical/electrical is 100% now, but two things are still on our list to fix or replace: the grille (headlights work, but it looks like the grille was tortured) and the vertical exhaust (has holes in it). Can't find a source for either. We'll run it as is, but it'd be nicer if those two things were replaced.
Unreal!!!! What a nice find. I hope that after all the repairs that you are still money ahead. It looks nice and since you brought everything up to date, it should last a long time. My Mom is 88 and recently I moved in to help her. She has a John Deere 2305 and it is about 16 years old. It has only 100 hours on it but l put another 50 hours on it this last summer. She bought it for my Dad before he died and it sat a long time not being used.
I guess im randomly asking but does someone know of a way to get back into an Instagram account?
I was stupid forgot my account password. I appreciate any help you can give me
@Kingston Douglas Instablaster :)
@Lance Carl thanks so much for your reply. I got to the site through google and im trying it out atm.
Seems to take a while so I will reply here later when my account password hopefully is recovered.
@Lance Carl It did the trick and I actually got access to my account again. I'm so happy:D
Thank you so much, you saved my account!
@Kingston Douglas you are welcome =)
Looks nice
On the 3 point hitch top link you should put grease fittings
Yeah, there were just screws in there for some reason but I figured it should have som zerks.
I JUST GOT 85 75O WITH SNOW BLOWER, FRONT END LOADER, AND BLADE WITH ONLY 800 HR. AND PLAN TO GET IT LOOKING BETTER, BUT MAY JUST SELL IT.
Nice!
Nice to see someone restoring these. It was a lot of work but now you've got something. I would recommend using an acetylene torch with a rosebud tip to heat any rusted threaded areas etc. They often can be turned by hand afterward. Also, with heat you can straighten the weight bracket and then weld a piece to reinforce it. How much did you have to pay for this?
Thanks for the tips!
Nice job! I have a 750 I'm working on. Did you restore the hydrualic system? My control valve is pretty worn and I need to get a rebuilt one - haven't found one yet..
Nice Job. Tractor looks great. Curious what type paint you used. Rattle can or shot out of a spray gun. I just bought an 850 that's spent most of it's life stored outside and needs some paint work.
Van Sickle rattle can. Really nice paint. My dad and brother use it a lot on JD restorations. Very pleased.
@@ptnelsonster I appreciate the info.
Do you know what aftermarket seat is on your 750 tractor? I tried a vevor brand seat and i sit so high my head is above the ROPS. Also do you have any issue with the seat springs being super soft?
I don’t notice the seat springs being a problem; work for me.
I got it on Amazon:
www.amazon.com/dp/B01G250XNA/ref=tsm_1_tp_tc
That looks so nice! I'm amazed that you were able to salvage and reuse the original decals.
Also do you shift gears while moving or do you come to a stop? Thanks again
I have an 89 but it has turf tires. I have been looking for ag tires. What size are yours? Ty
Apparently you decided to leave the brush mower attachment?
I've got it, out at my land. I've not hooked it up yet but it will get used this summer for sure.
Great video bud, I just made a offer on one in good working shape for 4,500, is that a good price?? Also if I get it I would like to get a bucket for it, have you considered that? Thanks
Did you get the mower too ?
Yep. I’ve not used it yet but it will definitely get used this summer!
How much to do the same to mine? Ill deliver.
When all said and done,,, you should've totally restored it as new!
Just as many problems as hours on it sure it's a real Deere?
Yanmar with Deere colors and decals... does that count? 😄