Good question. So far I've not noticed a problem, but then again I don't generally change full presets in the middle of a note that I'm holding. Perhaps I should make a video and try some stuff out.
Hi, nice vid. Did you try it with a single ext ctrl pedal? I cannot though seem to find a way to use correctly the ext ctrl single pedal for another option. It seems that whenever the pedal is in state A (ON) all other 4 midi buttons work (for example for MIDI PC preset change). If I press the pedal again (OFF), all buttons seem to be blocked. Tried mono/stereo cable connection, all single switch modes, nothing. The idea was to use it as an fx on/off but it does not seem to work. Any ideas, experience on this? (using a Laney single switch)
I’ve not, but I will give it a try. Is your switch latching or momentary? If it is latching I could see why it would mess things up, because when it is ‘on’ the control would think you are just holding down a button. Either way, I’ll give it a shot and get back to you!
@@JohnnyMatthewsMusic nice one, please do, bocz I can't seem to solve it. Btw I'm using the Laney FS1-MINI but I tried also with a generic switch. Thanks
I just tried it with the BOSS FS-5U and it worked. I looked up the Laney switch and it does seem like it is a latching switch which means it is an on/off switch, rather than just on while you hold it down.
@@JohnnyMatthewsMusic Thank you, I see. I use it with no issues with my tonex pedal as an ext control but it seems the ampero needs an Unlatched Footswitch then. Oh well, that wasn't what I hoped for. In any case, thanks for your time man!
@@Allann882 you will need a 5 pin MIDI cable to go from the controller to the TONEX. But once you have programmed the control with your phone and saved it back to the pedal, you don’t need your phone to use it.
@@RomeoPrado i’ve seen some videos where people are figuring out ways to control the toneX one with a midi device, however, it seems a little more convoluted than the full pedal.
Good info!! about two equipments of my guitar gear. Subscribed to your Channel!!
Great information clearly described..well done!
This was very well done. You covered the basics of MIDI in a clear and concise way, and you didn't go too fast.
@@steveliberty thank you. 😊
This is a fantastic tutorial, you explained all of this clear and concise. Thank you!
You're welcome! Thanks for watching :)
I’ve been trying to find a way to use the Ampero Control for a long time, and this is perfect. Thanks!
I think it has a lot of potential for as inexpensive as it is.
Excellent, very helpful. Thanks!
You're very welcome!
great explained - thanks
Glad it was helpful!
Thanks a lot!
You’re welcome!
Great video, thank you so much!
I'm glad you found it helpful! 😊
Estos valores midi también funcionarían con el tonex one conectado al chocolate con clable USB C?
I’m guessing most would, but I don’t have one to test on.
Hi! Is there a gap in sound when changing presets using midi? If there is.. is it enough that you wouldn’t want to use this when playing live?
Good question. So far I've not noticed a problem, but then again I don't generally change full presets in the middle of a note that I'm holding. Perhaps I should make a video and try some stuff out.
Hi, nice vid. Did you try it with a single ext ctrl pedal? I cannot though seem to find a way to use correctly the ext ctrl single pedal for another option. It seems that whenever the pedal is in state A (ON) all other 4 midi buttons work (for example for MIDI PC preset change). If I press the pedal again (OFF), all buttons seem to be blocked. Tried mono/stereo cable connection, all single switch modes, nothing. The idea was to use it as an fx on/off but it does not seem to work. Any ideas, experience on this? (using a Laney single switch)
I’ve not, but I will give it a try. Is your switch latching or momentary? If it is latching I could see why it would mess things up, because when it is ‘on’ the control would think you are just holding down a button. Either way, I’ll give it a shot and get back to you!
@@JohnnyMatthewsMusic nice one, please do, bocz I can't seem to solve it. Btw I'm using the Laney FS1-MINI but I tried also with a generic switch. Thanks
I just tried it with the BOSS FS-5U and it worked. I looked up the Laney switch and it does seem like it is a latching switch which means it is an on/off switch, rather than just on while you hold it down.
@@JohnnyMatthewsMusic Thank you, I see. I use it with no issues with my tonex pedal as an ext control but it seems the ampero needs an Unlatched Footswitch then. Oh well, that wasn't what I hoped for. In any case, thanks for your time man!
Glad to help a little! Thanks for watching!
So I just need the midi control and the tonex? No need my phone with Bluetooth connected?
@@Allann882 you will need a 5 pin MIDI cable to go from the controller to the TONEX. But once you have programmed the control with your phone and saved it back to the pedal, you don’t need your phone to use it.
Works with Tonex One?
@@RomeoPrado i’ve seen some videos where people are figuring out ways to control the toneX one with a midi device, however, it seems a little more convoluted than the full pedal.