The word SIMPLE doesn’t begin to describe this project. I never seen so much heavy metal cut, a multitude of holes drilled and then taped. Fine piece of engineering.
Nice, but Belt Length Adjustment Arm should use more rigid profile (see other belt grinders), with longer belt and heavier work it can get to some vibrations.
To be honest - it's stiff as hell. I can't imagine that part flexing under heavy work even with longer belts. More likely the belt would slip or something like that :)
Super handy for your belt grinder machine I got the old one to support my workshop. I want to make new but the problem is never founded belt sanders in my country so made belt sander by myself but not good at all breathe glue. Now I'm learning how to buy from outside Thanks for sharing
Great project. I like the smaller, half-size version of a 2x72, which will fit my shop better. I think the only improvement would be a crowned idler wheel to keep it tracking truer.
hola como estas, muy buen laburo!!!! te consulto, que Angulo le diste al rolo del tensor???, a la polea motriz también le dista algún Angulo para q acune a la banda??? medio lavadito ese mate pero siempre viene bien jeje
I'm sharing some schemes I was using to make it with my patrons but usually there are sime small changes after the build because all the things I build are let's say prototypes :)
¡Gracias! Si no recuerdo mal, expandí un poco más la mesa en el brazo, lo que afectó un poco la tensión de la correa. Fue solo un pequeño ajuste pero resultó con una correa correctamente tensada.
YERBA TARAGUI _ NOBLEZA GAUCHA _ LA HOJA _ CRUZ MALTA_ SON LAS MEJORES. PERO EL AGUA DEBE ESTAR A 60 GRADOS. PODES AGREGARLE UNAS GOTAS DE LIMON. O UNOS TROZOS DE CASCARA DE NARANJA SECA, DENTRO DEL MATE. SABE MUY BIEN.👍
Nice job. Thank you for sharing. I notice your wheels or rollers, are about 3” or 75mm wide. Also, you’re using a 2X48 belt. Did you do this so you can use multiple sized belts? If so, what other sizes fit on this machine. Just asking out of curiosity. I am working on a belt grinder that will run 1X30 and up to a 48” as well. I was only going to make my rollers 2” wide though. I think I like yours better though.
Exactly! these rollers should give the possibility to use 70-75mm wide belts (i didn't test that side yet though). I'm already using this belt grinder from time to time and I'm really happy with it.
The belt seems to be skipping side to side, the roller of the tracking mechanism is causing that because it's flat, it must have a raised center that centers the belt. Thanks for sharing.
The thing is - the roller is not flat. If you'd watched more carefully you would see that one of them is made in a barrel shape (exactly the thing you're talking about). Thank you for watching and the comment! 😊
Very nice. Looks robust and trustworthy. Didn't like the green, but that's just a minor detail. Fork cable lugs in that terminal board would be a better choice, but you tight them very well, would do the job just fine.
Thank you! I love that green colour so I just had to paint it like that. And you're right - fork cables lugs would be great here but I didn't have any at home that moment.
Great if had all the equipment used in making it. I could buy one heck of a belt grinder for less than all the cost of the lathe and stuff. Having said that I would make it if I had the stuff. Great job.
Thank you! Yeah, a lathe is pretty handy - but I made it from scratch too (using mostly an angle grinder, drill and welder as I didn't have a lathe / mill earlier😂). But that's true - if you had to buy all this equipment - you could buy for that a new mad belt grinder 😁.
good job,,, no welding,,, good ,that's the way to go because not to many people have a welder machine ,,,,or if have one can't use it ,,,like my self ,,i have one but i live on 3 floor ,,,, i can not use a welder machine on my living room
Thats true. Also welding inputs a lot of heat into the machine which may lead to bad geometry. But the question is - can you use an angle grinder in your living room? 🤔🤔
Hola. Me agrada la manera de explicarlo. No soy bueno con el inglés, aún así capté la idea. Veo te gusta el tereré. De dónde eres ? Tengo una lijadora muy básica hecha por mi. Juntare los materiales y copiaré tu proyecto Saludos Claudio desde Tucumán
@@eikpedersen Afhænger af motor og belastning. Nogle gange er stjerne-trekant-kontakten nødvendig, da stjerne tager mindre strøm fra kilden. Trekant kunne tæske afbryderne afhængigt af afbryderne. Jeg kan ikke give dig et præcist svar, da jeg ikke er professionel. Du skal nok prøve :)
Siempre trato de compartir los planes que uso con mis patrocinadores. Si quieres echar un vistazo, te invito a unirte a mi patreon o a la membresía del canal :) Pero además de eso, siempre trato de hacer la descripción lo mejor posible para que mis videos traigan la idea de cómo construir una máquina similar. ¡Gracias por ver! :)
Ho fatto alcuni semplici piani delle parti che ho usato in questa build. Disponibile per i miei sostenitori su patreon e per i sostenitori del mio canale :)
XD. I welded it later a little more but those had to be spot welds because penetrating through the well of the pipe would result in no possibility to assemble this together :) Don't worry, there past about a year and it is works fine. Thanks for watching!
@@GBWM_CNC the official standard has been revised - they are useless. There are better alternatives out there, I'm sure you will find them if you google about it, search for lock washer (and ignore the split washer). I think they might still work on soft steel if you really make them bite into soft steel and the corners of the split are sharp. I also thought they are defacto standard until I had to get into that topic and I was surprised to read that they are called to be useless.
Hi! There are cutting speeds which are good for certain materials. If you have a 1500rpm motor you and want to grind steel you'd have to make the drive wheel bigger so the cutting speed is the same. Depending on what material you want to grind - do some research of what cutting speed the material needs and just adjust the drive wheel diameter. Vc=(PI * d * n) / 1000 where Vc is cutting speed [m/min], d = diameter [mm], n = rpm of drive wheel. If you are operating in inches - just adjust this formula to inches or find a formula prepared for inch-based units :) I mean - you can grind with slower speeds but it will hurt the efficiency.
@@GBWM_CNC Your answer with details explanation make me speechless. My primary purpose for this belt grinder project is for knife making purpose. Secondary, for general metalworking. So what do you think about 2 HP with 3000rpm?
@@kratingdieng 2HP 3000rpm is exactly my setup. Works great in my opinion and when I was doing the maths for my belt grinder - a drive wheel with a diameter of about 160mm (a little over 6 inches) seems to be quite right to achieve the right cutting speed for grinding steel. The power of 2HP (1.5kW) in my opinion is enough - I wasn't able to stall the motor and at the end of the video you can see that with the right belt it just eats steel like crazy.
Krásna a precízna práca.... chválim.....mohol by sa ta poprosit o ten 3d model v nejakej forme alebo snad vykres? rad by som to tiez takto skusil....ďakujem.
Thanks! I reduced it by adjustin the screw of the barrel-shaped roller (by adjusting the hinge). Finding the sweet spot makes the belt stay in place until pushed really hard.
You are a life saver for someone like myself watching. I have the means to make my own, but just don't understand the basics. Watching you step by step really changed my thinking process. Thank you.
En este momento no puedo compartir los planos, porque hice algunos cambios en los planos que hice para construirlo. En este momento es un video para dar una idea de cómo construir dicha amoladora de banda. En el futuro, si tengo algo de tiempo para actualizarlos para que sean correctos como lo construí, los compartiré. ¡Saludos!
![DIY 2x72 Belt Grinder Build [FREE PLANS]](http://i.ytimg.com/vi/cAH3LldBWd0/mqdefault.jpg)
![[Live] ศึกมหึมันส์มวยไทยสังเวียนเดือด เวทีมวยชั่วคราวสวนสยาม | จันทร์ 30 กันยายน 2567](http://i.ytimg.com/vi/pM1k6f7JXUc/mqdefault.jpg)
The word SIMPLE doesn’t begin to describe this project. I never seen so much heavy metal cut, a multitude of holes drilled and then taped. Fine piece of engineering.
Simplified and elegant design. I love it.
Excellent build and the simplist build version I've seen. Now inspired for one as I have some big motors too, 240v. Thanks for sharing.
Thanks! I'm glad you got some inspiration!
Nice, but Belt Length Adjustment Arm should use more rigid profile (see other belt grinders), with longer belt and heavier work it can get to some vibrations.
To be honest - it's stiff as hell. I can't imagine that part flexing under heavy work even with longer belts. More likely the belt would slip or something like that :)
лента гуляет и трётся об упорную пластину... одни косяки...
Kỷ thuật thủ công chuyên môn,đồ họa tuyệt vời 👍.Lần đầu tiên đến xem like & đăng ký theo dõi 😊
tôi vui vì bạn thích nó! Cảm ơn! :)
안녕하세요. 반갑습니다. 좋은 작품들 잘 보고 갑니다. 감사합니다
안녕하세요! 여기 오신 것을 환영합니다! :)
Very nice, small and cool work! What are the length and width of the grinding belt?
Thanks! The belt is 50mm wide x 1220 long
That's a very cool and compact design ! Would you be willing to share the plans ? If you've made any, of course
I'm glad you like it! I shared the step file and the plans I was using for my patrons on patreon and channel members 😁
You may find a similar project with free and detailed plans here:
th-cam.com/video/GnxdQN6b1Fw/w-d-xo.html
Super handy for your belt grinder machine I got the old one to support my workshop. I want to make new but the problem is never founded belt sanders in my country so made belt sander by myself but not good at all breathe glue.
Now I'm learning how to buy from outside
Thanks for sharing
Pretty handy to have the belts in the right size. I saw your videos 😉 thanks!
Auriez vous tout les dimensions pour faire ce merveilleux grinder svp?
Je partage quelques dessins avec mes clients. Celui-ci aussi
🎉🎉🎉🎉🎉🎉🎉🎉
Que projeto top! Parabéns!
obrigado! :)
Amigo excelente proyecto! Lo único horroroso fue ese mate muy mal ejecutado🤷♀️👌😂😂
Era la segunda inundación, tal vez por eso no se veía demasiado elegante 😂😂
buen trabajo..gracias por tu tiempo..un saludo
Gracias por ver 😁
Parabéns ficou top
Estou feliz que você gostou! obrigado! :)
Great project. I like the smaller, half-size version of a 2x72, which will fit my shop better. I think the only improvement would be a crowned idler wheel to keep it tracking truer.
19:37 - There is one! :) just a slight barell shape but it is and it works. At the first test it wasn't well adjusted though
Esa e de primeira linha se eu tivese uma dessa eu tava rico eu tenho uma aqui mais é um quebra gaiho .
Um grande abraço pra vc
Looks great, well done.
Thank you!
hola como estas, muy buen laburo!!!! te consulto, que Angulo le diste al rolo del tensor???, a la polea motriz también le dista algún Angulo para q acune a la banda??? medio lavadito ese mate pero siempre viene bien jeje
¡Hola! ¿Estoy bien y tú? El rodillo tensor tiene forma de barril: 50 mm de diámetro en el medio y 48,5 mm de diámetro en los extremos.
There are those that can stick two pieces of metal together and then there are welders
Wondering which one of them is that guy in the video
Nem tudok mert még nekem sincs.
Great machine mate. We’ll done buddy 👍. Could you tell me what wood glue you used please. Thanks
Thanks! Actually it was my fathers glue which he put into an old dishwashing liquid bottle 😂So I'm not able to tell you what exact wood glue it was.
Do you have all the schemes in pdf to replicate ?
I'm sharing some schemes I was using to make it with my patrons but usually there are sime small changes after the build because all the things I build are let's say prototypes :)
You know what I think? I think you should sell these cool ass items here in the U.S. New York to be specific!awesome work,
Haha I'm glad you like it! It sounds a bit unrealistic to me though! 🤣😁
Creo haber entendido que la banda necesitaba mas tension, como lo lograste?? cambiaste el resorte a gas?? Excelente proyecto!!!!
¡Gracias! Si no recuerdo mal, expandí un poco más la mesa en el brazo, lo que afectó un poco la tensión de la correa. Fue solo un pequeño ajuste pero resultó con una correa correctamente tensada.
Felicidades saludos desde México 🇲🇽 te quedó fregona todo muy bien esplicado te boy a copiar la idea 💡 gracias
¡Gracias! Buena suerte con tu construcción. ¡Saludos desde Polonia! :)
Десятку болгаркой пилить ещё то развлечение. Плазморез бы сильно помог.
О, это точно :)
Dunno about your local laws, but Windsor brand mate (with coca leaf) packs a nice little punch.
Local laws don't allow such for sure ;)
MUY BUENA HERRAMIENTA....SALUDOS Y BENDICIONES ....SOY SU NUEVO SUSCRIPTOR......SALUDOS....REYNOSA
¡Gracias! ¡Me alegra que te guste mi trabajo! ¡Saludos!
Très belle realisation qui offre l avantage d être compact ....merci pour ce partage.
Je suis content que vous l'aimez :)
Can you tell me which software are you using for modeling this equipment
fusion360. Great software for hobbyists
Bel lavoro, bravo!
Volevo sapere che vernice hai usato, opaca o lucida?
Grazie!
Grazie!
È una vernice lucida
CÁC Ô ANTI TOÀN THEO CẢM TÍNH
Tumara adress kya h
YERBA TARAGUI _ NOBLEZA GAUCHA _ LA HOJA _ CRUZ MALTA_ SON LAS MEJORES. PERO EL AGUA DEBE ESTAR A 60 GRADOS. PODES AGREGARLE UNAS GOTAS DE LIMON. O UNOS TROZOS DE CASCARA DE NARANJA SECA, DENTRO DEL MATE. SABE MUY BIEN.👍
Tengo que revisar las cáscaras de naranja. Veo que te gusta la yerba mate argentina 😎
Своими руками в заводских условиях
You are professional work also i like to drink Mata with cup
Nice job. Thank you for sharing.
I notice your wheels or rollers, are about 3” or 75mm wide. Also, you’re using a 2X48 belt. Did you do this so you can use multiple sized belts? If so, what other sizes fit on this machine.
Just asking out of curiosity. I am working on a belt grinder that will run 1X30 and up to a 48” as well. I was only going to make my rollers 2” wide though. I think I like yours better though.
Exactly! these rollers should give the possibility to use 70-75mm wide belts (i didn't test that side yet though). I'm already using this belt grinder from time to time and I'm really happy with it.
The belt seems to be skipping side to side, the roller of the tracking mechanism is causing that because it's flat, it must have a raised center that centers the belt.
Thanks for sharing.
The thing is - the roller is not flat. If you'd watched more carefully you would see that one of them is made in a barrel shape (exactly the thing you're talking about). Thank you for watching and the comment! 😊
Show
Muy buen trabajo, al milimetro y bien explicado, por cierto la mejer yerba mate, La Sara 👍 🇺🇾
gracias!😁
Hi, any basic drawings for downloading? Thanks for reply.
Hello. Step model and basic drawings are available for people which joined support membership of this channel.
if anybody randomly has a couple of 10 mm thick scrap steel plates, feel free to send me
🤣👍
Well done. Very impressive
Sehr gute Arbeit !!!!
Danke! 😁
PHÂN TÍNH HAY ĐẤY
Very nice. Looks robust and trustworthy. Didn't like the green, but that's just a minor detail.
Fork cable lugs in that terminal board would be a better choice, but you tight them very well, would do the job just fine.
Thank you! I love that green colour so I just had to paint it like that. And you're right - fork cables lugs would be great here but I didn't have any at home that moment.
Great if had all the equipment used in making it. I could buy one heck of a belt grinder for less than all the cost of the lathe and stuff. Having said that I would make it if I had the stuff. Great job.
Thank you! Yeah, a lathe is pretty handy - but I made it from scratch too (using mostly an angle grinder, drill and welder as I didn't have a lathe / mill earlier😂). But that's true - if you had to buy all this equipment - you could buy for that a new mad belt grinder 😁.
Very well made. Do you files or plans gorgeous this build? Thank you so much
Thank you! :) Model and some simple drawings which I was using are available for my patrons and channel supporters
Sehr gut einfach in der Konstruktion und praktikabel in der Fertigung
y las medidas maestro??
¿Podrías explicar? :D
При лёгком нажатии лента уходит в сторону это означает, что ролики установлены не аккуратно, не параллельно друг другу. Удачи.
если бы каждую существенную часть лица фрезеровали на фрезерном станке - было бы проще довести до идеала :)
good job,,, no welding,,, good ,that's the way to go because not to many people have a welder machine ,,,,or if have one can't use it ,,,like my self ,,i have one but i live on 3 floor ,,,, i can not use a welder machine on my living room
Thats true. Also welding inputs a lot of heat into the machine which may lead to bad geometry. But the question is - can you use an angle grinder in your living room? 🤔🤔
@@GBWM_CNC 😆
Great work sir 👏 ❤
thanks! :)
Hola. Me agrada la manera de explicarlo. No soy bueno con el inglés, aún así capté la idea. Veo te gusta el tereré. De dónde eres ?
Tengo una lijadora muy básica hecha por mi. Juntare los materiales y copiaré tu proyecto
Saludos
Claudio desde Tucumán
¡Hola! ¡Me alegra que te guste el vídeo! Soy de Polonia. Después de un tiempo puedo recomendar esta máquina. Funciona muy bien. ¡Salud! :)
@@GBWM_CNC Hola. Cómo accedo a los planos ?
@@claudiocampero9074 Hola. Los planes están disponibles para miembros del canal o patrocinadores del canal en Patreon :)
jaja en este preciso momento estoy tomando mate y viendo tu video ,exelente
¡Ja ja! ¡Excelente! :D
👍👍👍
Alguien se va a enojar mucho por ese mate...
¿por qué? 😅
Er det en 3 faset motor du bruger? Mvh Eik
Ja præcis
@@GBWM_CNC fedt. Jeg har selv en 4kw motor liggende. Kan man starte sådan en uden trekantstarter? Mvh Eik
@@eikpedersen Afhænger af motor og belastning. Nogle gange er stjerne-trekant-kontakten nødvendig, da stjerne tager mindre strøm fra kilden. Trekant kunne tæske afbryderne afhængigt af afbryderne. Jeg kan ikke give dig et præcist svar, da jeg ikke er professionel. Du skal nok prøve :)
Не хватает стола с наклоном. Я наверное повторю ваш гриндер и сделаю стол с функцией наклона
Я рад, что вам нравится этот дизайн. Да, наклонный стол отсутствует, но я могу жить без него :) Отпишитесь, как получилось!
Very good work hero, you are a professional, I wish you success for the best
Thank you! 😊
Классно сделал! Я бы натяжной ролик сделал чуть ниже
Спасибо! :) Есть кое-что, что могло бы быть лучше - может быть, в следующий раз :)
Simple and excellent.
Perfection is perfected. Excellent job man 🤙
Thank you!
hola amigo la tienes a la venta?? gracias
Lamentablemente no. Hice esta máquina como parte de mi pasatiempo y compartí aquí cómo hacerlo :)
Hola
En la descripción sería exelente los planos de el diseño
Siempre trato de compartir los planes que uso con mis patrocinadores. Si quieres echar un vistazo, te invito a unirte a mi patreon o a la membresía del canal :) Pero además de eso, siempre trato de hacer la descripción lo mejor posible para que mis videos traigan la idea de cómo construir una máquina similar.
¡Gracias por ver! :)
Peccato che non ci sia il disegno con tutte le misure
Ho fatto alcuni semplici piani delle parti che ho usato in questa build. Disponibile per i miei sostenitori su patreon e per i sostenitori del mio canale :)
@@GBWM_CNC dove posso trovarli?
@@giovannidettori6674 www.patreon.com/gbwm :)
You are the best.
You really should learn to weld, if that hinge holds together its a true miracle.
XD. I welded it later a little more but those had to be spot welds because penetrating through the well of the pipe would result in no possibility to assemble this together :) Don't worry, there past about a year and it is works fine. Thanks for watching!
@@GBWM_CNC :) thanks for the video, i'm planning to make my own belt grinder, maybe, so it was good to watch.
11:02 split washers should be avoided, they might get loose over time.
aren't those used to be anti-loosening parts in the joint?
@@GBWM_CNC the official standard has been revised - they are useless. There are better alternatives out there, I'm sure you will find them if you google about it, search for lock washer (and ignore the split washer).
I think they might still work on soft steel if you really make them bite into soft steel and the corners of the split are sharp.
I also thought they are defacto standard until I had to get into that topic and I was surprised to read that they are called to be useless.
Congratulations - Excellent instructions. What is the belt size?
Thank you! The belt size is 50X1220 [mm] (2x48 inch)
@@GBWM_CNC I am very grateful.
Hello... could I used my electric motor 1 phase 1.5 HP with 1500 rpm? What cons about slower speed of electric motor?
Hi! There are cutting speeds which are good for certain materials. If you have a 1500rpm motor you and want to grind steel you'd have to make the drive wheel bigger so the cutting speed is the same. Depending on what material you want to grind - do some research of what cutting speed the material needs and just adjust the drive wheel diameter. Vc=(PI * d * n) / 1000 where Vc is cutting speed [m/min], d = diameter [mm], n = rpm of drive wheel. If you are operating in inches - just adjust this formula to inches or find a formula prepared for inch-based units :) I mean - you can grind with slower speeds but it will hurt the efficiency.
@@GBWM_CNC Your answer with details explanation make me speechless. My primary purpose for this belt grinder project is for knife making purpose. Secondary, for general metalworking. So what do you think about 2 HP with 3000rpm?
@@kratingdieng 2HP 3000rpm is exactly my setup. Works great in my opinion and when I was doing the maths for my belt grinder - a drive wheel with a diameter of about 160mm (a little over 6 inches) seems to be quite right to achieve the right cutting speed for grinding steel. The power of 2HP (1.5kW) in my opinion is enough - I wasn't able to stall the motor and at the end of the video you can see that with the right belt it just eats steel like crazy.
@@GBWM_CNC Fantastic mate! I will build a copy ASAP. Thank you very much for everything, the project video and every single reply from you.
@@kratingdieng You're welcome 😎
How long is sand belt?
it's 1220mm long
Looks great and works fine, we'll done!
Thank you!
Krásna a precízna práca.... chválim.....mohol by sa ta poprosit o ten 3d model v nejakej forme alebo snad vykres? rad by som to tiez takto skusil....ďakujem.
Som rád, že sa ti páči :) niektoré kresby, plány a 3D modely sú dostupné pre mojich patrónov na patreone a tu na TH-cam
@@GBWM_CNC áno je to super práca. Patreon som nikdy ešte nepoužil ale ak je možnosť nevidím problém....aké členstvo vyžadujes alebo je to jedno?
@@sasu2019 Každý z mojich patrónov má prístup k súborom, ktoré zdieľam :)
@@GBWM_CNC tak teda idem tam dat členstvo na ytb .....ďakujem
@@sasu2019 Vitajte na palube :)
Ficou top gostei parabéns 👏👏👏
¡Gracias! 😎
What type of welder do you use?
In this project i used a mig welder to weld the hantle and hinge. But I use sometimes tig welding too.
Well done dude. Looks awesome 👍👍👍👍👍
Thanks bro!
Hola, tendrás los planos
Hola. Los planes que usé para construirlo están disponibles para los miembros de apoyo del canal.
Are bhai tumne to kamal kar diya kya khub mashin bana diya exllent vah bhai vah super
Kitni kimat h. Prise kitni padti h bhai
Tumto hiro ho bhai
dhanyavaad mere dost! yah masheen bikree ke lie nahin hai lekin ise banaana bahut aasaan hai
That motor is a beast! Nice solid work. What is the length of the belt?
Thanks! The belts lenght is 1220mm.
@@GBWM_CNC thanks. I'd like to make one similar machine but the only belts I can find here are 980mm (approx.)
@@AccidentalScience I've found a supplier on my local "ebay" with variety of belts. Different widths, lenghts etc.
@@GBWM_CNC I'm not used to purchase stuff on ebay but I'll give a look, thank you for the hint.
@@AccidentalScience I've discovered also 2 or 3 online suppliers with their own web store sites. Worth a look. Good luck!
nice build
thanks!
👍excellent
thanks! :)
como consigo esse projeto?
Planos disponíveis para download para pessoas que aderiram apoiando este canal do youtube
Great build, out of interest did you reduce the belt wander during grinding by adjusting the gas piston?
Thanks! I reduced it by adjustin the screw of the barrel-shaped roller (by adjusting the hinge). Finding the sweet spot makes the belt stay in place until pushed really hard.
Good work mate.
Thanks!
You are a life saver for someone like myself watching. I have the means to make my own, but just don't understand the basics. Watching you step by step really changed my thinking process. Thank you.
I'm glad I could help! 😁
Cómo consigo los planos?
En este momento no puedo compartir los planos, porque hice algunos cambios en los planos que hice para construirlo. En este momento es un video para dar una idea de cómo construir dicha amoladora de banda. En el futuro, si tengo algo de tiempo para actualizarlos para que sean correctos como lo construí, los compartiré. ¡Saludos!
Los dibujos técnicos y el modelo ya están disponibles para los seguidores del canal. ¡Saludos!
Можно чертежи?
Чертежи и модель доступны для людей, присоединившихся к подписке на поддержку канала.
Dobra robota stary!!
Dziękuję! 😎
Ty si uz zbuchal aspon vtaciu budku , majster !
How can i get plans of this magnificent project ?
Plans available for people which join support membership on this channel.
Как только показывают болгарку которую держат не правильно, выключаю..
? 😅
це означає що ви пішли за російським кораблем)) 😉😂
@@ВасильПіддубний-ь5ц Дружище,однако материтесь вы по русски,чешете бесперебоев.А тут ви,хри