Reset Uconnect : Soft Reset Uconnect - Dodge RAM Chrysler Fiat

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ธ.ค. 2024

ความคิดเห็น •

  • @DIYGEEKTEXAS
    @DIYGEEKTEXAS  4 ปีที่แล้ว +21

    Watch my other video - HOW TO UPGRADE UCONNECT here: th-cam.com/video/zpqk0gyEEec/w-d-xo.html

  • @deedee1723
    @deedee1723 2 ปีที่แล้ว +5

    I have been fumbling around with this for about an hour before I came across your video... it literally took me 5 seconds to reset my 2016 jeep renegade after watching this.... I did have to use the two buttons however... I appreciate this video

  • @constructinjoy
    @constructinjoy 3 ปีที่แล้ว +17

    Listen it's early in the morning and OMG I listen to my music and everything and I was like I am not taking his car to the dealer you are a lifesaver

  • @jamesdahlgard
    @jamesdahlgard 2 ปีที่แล้ว +4

    My dealership wanted to charge me hundreds to replace this and all in had to do was this reset. Thank you!!!!

  • @dffcell1832
    @dffcell1832 ปีที่แล้ว +3

    My dodge center console was messing up. I followed your instructions and BAM. It works!

  • @TexasRider
    @TexasRider ปีที่แล้ว +4

    Just a quick update on your video. Today I lost my sounds on my 2022 Ram 1500 and didn't know what to do until I found your video. I found that the first method worked with power button and the the tune button even though it's a 2015 and old method. Thanks for saving me a trip to the dealer. Great video.

  • @reddkard
    @reddkard 4 ปีที่แล้ว +6

    Awesome !!! I fumbled around for an hour before I saw your video ....15 sec later and it works great !!!

  • @ralphrodriguez5546
    @ralphrodriguez5546 2 ปีที่แล้ว +6

    This guy is a genius..first time having problems on my 2015 Chrysler 300 s..but now it's all good.thanks man

  • @jeffmodrowjm
    @jeffmodrowjm 3 ปีที่แล้ว +12

    Dude, you saved me! My car was stuck on defrost and no radio. Did your reset on my 2012 Chrysler 300, and everything works. Thank you!!!

    • @joebujak1207
      @joebujak1207 3 ปีที่แล้ว

      I tried doing this, 2014 ram still stuck on defrost, replaced actuators, climate control module and the climate knobs under the uconnect...any ideas??

    • @WayOfTheBros
      @WayOfTheBros 2 ปีที่แล้ว

      You comment saved to so much time of searching and more than likely skipping the this vid… thank you

    • @pimpindnice910
      @pimpindnice910 2 ปีที่แล้ว

      I tried on my 2011 300 and nothing happened, did you have yours in run or in acc

    • @samanthagraham5566
      @samanthagraham5566 2 ปีที่แล้ว

      @@pimpindnice910 I have the same Year you have and having this problem. Did you ever get it to work and if so what did I you do?

    • @pimpindnice910
      @pimpindnice910 2 ปีที่แล้ว

      @@samanthagraham5566 no, I never got it to reset.

  • @st8price
    @st8price ปีที่แล้ว +2

    Just did this on a 2023 and it worked. Thank you

  • @jamesriddle7345
    @jamesriddle7345 2 หลายเดือนก่อน

    Just wanted to say thank you. This fixed my problem and saved me a trip to the dealer.

  • @malikabuz
    @malikabuz 2 ปีที่แล้ว

    Thanks so much for this video! Method 1 worked like a charm and now my Bluetooth connection is working again! 🥰

  • @felipeflores9142
    @felipeflores9142 ปีที่แล้ว +2

    Hell yeah, you’re awesome dude, first method worked for my 2023 1500 lone star ram. Worked right away. Thanks dude.

  • @Jskydives
    @Jskydives 11 หลายเดือนก่อน

    2019 Ram Rebel: CarPlay wouldn’t work no matter what I did. I performed the first method. Screen stayed on but I did get a flicker of the screen. Tried CarPlay again and it worked!!! Thank you so much

  • @GoddessQui
    @GoddessQui 5 หลายเดือนก่อน

    My radio was messing up on my 2016 ram lonestar by not connecting to my Bluetooth audio and this reset worked and very easy . Thank you !! ✨

  • @canik9mm
    @canik9mm 2 ปีที่แล้ว +3

    THANK YOU! Saved me a trip to the dealership. First option worked for my ram 22. Sirius frozen.

  • @Gex2501
    @Gex2501 3 ปีที่แล้ว +13

    Thanks for this! Saved me a trip to dealership and a panic attack when my settings went FUBAR.

  • @So.avant.garde1
    @So.avant.garde1 4 ปีที่แล้ว +31

    This is awesome! It worked perfectly! I have a 2018 and you saved me a trip to the dealer. That’s priceless!

    • @jrt6153
      @jrt6153 3 ปีที่แล้ว +4

      i cant seem to reset it i held my finger in the top
      right corner on run mode on my 2018 300s

    • @Mr.Tecio510
      @Mr.Tecio510 3 ปีที่แล้ว

      @@jrt6153 did you ever figure out how to do it

    • @thedoubleos107
      @thedoubleos107 2 ปีที่แล้ว

      I have a 2012 Chrysler 300 and this did not work for me I held my hand on those two buttons for 10/15/30sec/1min and nothing is happening help please if anyone has another suggestion that will work thanks

    • @pkmuffun
      @pkmuffun 2 ปีที่แล้ว +3

      Didn't reset for my 2018

    • @lyleb8938
      @lyleb8938 9 หลายเดือนก่อน +1

      Did not work on my 2018 ram neither 🤷🏻‍♂️

  • @Huckleberry_Hunter
    @Huckleberry_Hunter ปีที่แล้ว

    This worked on my 2019 Jeep Compass!! Screen was black and not responsive! This quick reset saved me a trip to the dealership!

  • @buildleaserepeat7207
    @buildleaserepeat7207 3 ปีที่แล้ว +2

    Thanks for uploading the video it save my day. My radio was messing up. I cannot pair my Bluetooth. Everything works now after I reset the uconnect using your instruction!

  • @nistan3
    @nistan3 3 ปีที่แล้ว +5

    The two button reset worked on my 2016 jeep Cherokee! Thanks man 🙏

  • @ajack226
    @ajack226 ปีที่แล้ว

    Thank you, pressing the volume and tuning buttons together got me back in business.

  • @huckleberryred472
    @huckleberryred472 2 ปีที่แล้ว +4

    Thank you the 2 button method worked while driving!!! Fixed my issues

  • @davidhake2239
    @davidhake2239 2 ปีที่แล้ว +1

    My 2022 Ram 3500 DRW stopped connecting to Sirius XM and this reboot fixed the problem. Thanks.

  • @montanofermin1535
    @montanofermin1535 3 ปีที่แล้ว

    I have a 2017 Chrysler 300s and the 1st method didn’t work so was ugh and I tried the the 2nd method on the right corner and it really work had my doubts and it WORKED 👌🏼😄

  • @jorgerojas3441
    @jorgerojas3441 2 ปีที่แล้ว +1

    Omg thx u u saved me a trip to going to my dealer on my 2022 Jeep compass once in awhile CarPlay wouldn’t work but I held both the power and time button now it works 🙌🏼🙌🏼🙌🏼

  • @danielmauricio8504
    @danielmauricio8504 2 ปีที่แล้ว +4

    Just saved me a trip to the dealer! Thank you! 🙏

  • @christopherparnell9172
    @christopherparnell9172 3 หลายเดือนก่อน

    Thank you so much I was getting so upset over this phone would not connect and driving 4 hr without it would have been horrible your awesome thank you really

  • @ASHLEYGUILLAUME
    @ASHLEYGUILLAUME 2 ปีที่แล้ว +1

    YES!!! My UConnect system somehow disconnected and nothing I tried worked until I came upon this video.
    The first method worked on my 2022 Dodge Charger Hellcat!!!
    Thank you.

  • @twinklelittleunicorn600
    @twinklelittleunicorn600 6 หลายเดือนก่อน +2

    The first one worked for me thank you so much❤️

  • @1derful6
    @1derful6 ปีที่แล้ว +1

    This little trick worked perfectly. Thank you. I have a 2021 Jeep Grand Cherokee

  • @Vincejg84
    @Vincejg84 5 หลายเดือนก่อน +2

    Thank you Method 1 worked on my 2022 Jeep Grand Cherokee

  • @davidtunstall7242
    @davidtunstall7242 ปีที่แล้ว

    Dude thanks for the info I was going to take my ram to the dealership. I will subscribe to your channel.

  • @jjmiller9196
    @jjmiller9196 2 ปีที่แล้ว +2

    YOU ARE A LIFE SAVER THANK YOU SO MUCH!!!! The first method worked on my 2016 lonestar ram

  • @chrisf7731
    @chrisf7731 29 วันที่ผ่านมา

    Life saver my Bluetooth would not connect did the hold way then it worked, thank you

  • @timsmith2187
    @timsmith2187 7 หลายเดือนก่อน +1

    I have a 2020 dodge ram big horn. Neither way resets it. Any ideas?

  • @flossin5025
    @flossin5025 2 ปีที่แล้ว

    Thanks bro!!! I installed a screen protector on my JLUR uconnect screen and it was tweaking out, it keep pressing buttons and wouldn't stopped but rebooting it by your first method fixed it. Thank you! This is a brand new uconnect system and I thought i f'd it up lol

  • @Gravesyte
    @Gravesyte 3 ปีที่แล้ว +3

    You just helped me fix my 2021 Chrysler Pacifica radio

  • @adammccreery1366
    @adammccreery1366 2 ปีที่แล้ว +2

    I just want to say you're awesome was sitting here for an hour trying to figure out what was going on you saved my a**

  • @joallison1034
    @joallison1034 2 ปีที่แล้ว +1

    Thank you!! You saved me a trip to the Dealership

  • @mikesutton7958
    @mikesutton7958 ปีที่แล้ว

    Used your #2 reset method and I'll be damn if that didn't work, thank you (2022 Ram 1500 Lone Star)

  • @graysonanddad4938
    @graysonanddad4938 ปีที่แล้ว

    Dude thank you so much, first method worked perfectly for 2017 Jeep Grand Cherokee

  • @jlindy73
    @jlindy73 ปีที่แล้ว +2

    Fixed my issue with favorites not working. Thank you

  • @michaelkenmir6628
    @michaelkenmir6628 2 ปีที่แล้ว

    Question, will this also clear the memory of the previous owner's phone contacts and favorites?

  • @ecocav0222
    @ecocav0222 ปีที่แล้ว

    22 Ram 2500 and it was the power button and tune button at the same time method. I'll see how the radio does now but I've had issues since new with it. Dropping the Bluetooth connection to the phone and then playing sirus xm preview. Hopefully this works better now. Thank you for the video.
    Edit it did not work at the Bluetooth connection issue. I know it's the uconnect as it doesn't happen with the other vehicles I connect my phone with. Including the semi truck with a cheap factory radio. So hopefully the radio getting updated for the rear camera recall will help it. Lol

  • @innovativitga4705
    @innovativitga4705 4 ปีที่แล้ว +4

    I have a 2018 Dodge RAM, I used the 2nd method (top right screen) method. It Works!!!! Thanks Man!

  • @Jack-Surreal_Panes
    @Jack-Surreal_Panes ปีที่แล้ว

    Wonder if it will help with the climate OFF and will not turn on. I got a jsb from dodge a while back, maybe an update thing. Will try restrictions, install the USB data, disconnect battery reset then last step, new hvac control module😢

    • @hate1965
      @hate1965 6 วันที่ผ่านมา

      Got the same problème climat Control won’t turn on did you find a solution

  • @mikejung3908
    @mikejung3908 2 ปีที่แล้ว +1

    Thank you, finally someone with an answer that doesn’t involve playing with wires.

  • @musicmojo100
    @musicmojo100 ปีที่แล้ว

    U a life saver! This was annoying hence my battery malfunctioned

  • @kirkmorel3790
    @kirkmorel3790 3 ปีที่แล้ว +5

    Thanks for tutorial. I have a 2021 Ram 1500 and the volume was maxed out all morning. I thought I was going to have to take it in for service. Keeping it on ACC and pushing the volume and tune for 10 seconds reset it. Very Happy. Thanks!!!

    • @DIYGEEKTEXAS
      @DIYGEEKTEXAS  3 ปีที่แล้ว +1

      @Kirk Morel Thanks for sharing your tip: 2021 RAM 1500 - Turn on to ACC (Accessory), push VOLUME and TUNE and hold for 10 seconds.

    • @YT-MasterAdmin
      @YT-MasterAdmin 2 ปีที่แล้ว

      Weird because it doesn't work on a 2020 Ram. 🤔

  • @ibragimtashtanov2510
    @ibragimtashtanov2510 2 ปีที่แล้ว +1

    Had no sound on bluetooth reseted it and i have sound thank you👍 i have 2014 ram 1500

  • @FranciscoMartinez-on7kl
    @FranciscoMartinez-on7kl 4 หลายเดือนก่อน

    Thank you my wireless CarPlay on my 2022 Ram 2500 wasn’t working tried the first reset and worked like a charm

  • @scienceofarms
    @scienceofarms 3 ปีที่แล้ว +7

    Very helpful, fixed my ram uconnect and my radio works again. Thanks

  • @katysilo4786
    @katysilo4786 3 ปีที่แล้ว +2

    Thanks for posting this video, you just helped me reset my dodge ram truck 2015

  • @Gamer4lyfe00
    @Gamer4lyfe00 2 ปีที่แล้ว +2

    I have a 2015 dodge charger se with the 5" screen and about 3 weeks ago my screen got stuck on the dodge logo. It will not do anything else and it will not turn off unless I take out the fuse. Even if the car is completely turned off the screen will not. It killed my battery one morning and at the time I thought I needed a new battery so I got a new one put in probably for nothing but it was the screen not turning off overnight that killed the battery. Any ideas on what could be causing this?

    • @DIYGEEKTEXAS
      @DIYGEEKTEXAS  2 ปีที่แล้ว +2

      @Gamer4Lyfe Try looking into delamination issues. Many dodge / chrysler LCD screen have delamination issue where the outer layer separates from the inner. After separation, sometime the 2 layers touches each other simulating a touch/tap (false touch). Maybe that is what keep your screen to be on all the time?

  • @gordo4132
    @gordo4132 ปีที่แล้ว

    Hey will this method works if my radio asking for the code ? I bought the radio separately so i don’t know if i should go get it reset

  • @upnorthyooper1196
    @upnorthyooper1196 ปีที่แล้ว

    Just my heater controls won't display on my 2022 3500 will this work for that?

  • @maxcichanowicz3160
    @maxcichanowicz3160 2 ปีที่แล้ว +1

    My computer screen was not showing anything, just a lit up blank screen after having it for two months and this saved me so much stress!!

  • @thesipesisrandom4534
    @thesipesisrandom4534 2 ปีที่แล้ว +1

    Thanks man, the "old" way worked for my 2022 Ram

  • @shahin.rasooli
    @shahin.rasooli 2 ปีที่แล้ว +1

    Great video very helpful and it fixed the problem. Thank you

  • @fundog55
    @fundog55 2 ปีที่แล้ว

    Any ideas for a 2015 dodge journey, aside from the fact that I shouldn't have bought it. Navigation is showing two dashes and when you click it the screen is black. Tried the soft reset suggestions you have here and neither do anything. Wondering if it's different on this car for some reason.

  • @hotelalphawhiskeykilogrunt7925
    @hotelalphawhiskeykilogrunt7925 3 ปีที่แล้ว

    Second method didn’t work on my 19 model
    For 19 Laramie mine only way that worked was shut all power down for 45 seconds then remote start the truck open door without pressing anything hold on the volume button and it boots up the 8.4 system and then start the truck normally and your good found this on Reddit and it saved me after hours of searching ! Hope this helps someone with a truck like mine in a frozen screen. The right corner does not work on a 19 Laramie with 8.4 uconnect

    • @superdockk
      @superdockk 2 ปีที่แล้ว

      Wow thats a lot of Bravo Sierra.. Lucky for Reddit ...

    • @ericwang9407
      @ericwang9407 2 วันที่ผ่านมา

      it worked for my 2019 RAM 1500 with 12" Uconnect. thank you for sharing the especial info.

  • @jimmys511
    @jimmys511 3 ปีที่แล้ว +2

    My screen is not responding by touching anywhere do you think this will help with my issue?

    • @DIYGEEKTEXAS
      @DIYGEEKTEXAS  3 ปีที่แล้ว +1

      Sounds like a broker digitizer which is a much bigger issue. You should try resetting anyways

  • @lyndazimmerman913
    @lyndazimmerman913 2 ปีที่แล้ว +2

    Short and right to the issue. Thank you.

  • @Dodge-tv7jc
    @Dodge-tv7jc 2 ปีที่แล้ว +1

    Thank you sm. I disconnected and for some reason it would not let me reconect and the aux cord worked but i like bluetooth better Worked right off the bat

  • @windomzarate4484
    @windomzarate4484 3 ปีที่แล้ว +3

    That man for your help , my radio now it’s working ! 🤙🏼

  • @hurricaneclipz9963
    @hurricaneclipz9963 3 ปีที่แล้ว +2

    I have a 2017 ram 1500 tradesmen with the smaller screen radio , the radio or music was muted but i would hear the beep boop from the selections i made lol anywhoo I unplugged the battery both terminals and slapped a little of green oxidation off and came in the truck even turned on smoother . God bless i hope this helps

  • @jcaldrn2455
    @jcaldrn2455 7 หลายเดือนก่อน

    Si funcionó en jeep compass 2018 👍👍👍gracias mi radio ya no funcionaba

  • @monsterdxswk6265
    @monsterdxswk6265 2 ปีที่แล้ว +1

    I have a 2015 fiat and one day last week my Bluetooth just disappeared. Tried both methods but niether will work, any suggestions?

  • @KENPOCHOPPER
    @KENPOCHOPPER 2 ปีที่แล้ว +1

    2022 ram 2 weeks old fm radio works but sirrus has no audio. Any ideas? I tried hild right top corner 15 secs did nothing 😔

  • @kbelimarley
    @kbelimarley 10 หลายเดือนก่อน

    Amazing. Thanks alot for that info. Dealership wanna charge $2k lol

  • @christ7199
    @christ7199 ปีที่แล้ว

    Great video, o have a 2014 2500 Ram. Unfortunately, I lost my talk to text. Will a reset help restore it? Also, is there a way to hook up my android to the navigation screen?
    Thanks!
    CT

  • @diegomagallon321
    @diegomagallon321 2 ปีที่แล้ว +1

    Hi I’ve tried this to reset my U-Connect on my Dodge Ram 2500 2014.
    My hands free Bluetooth connection doesn’t work. It does not listen to any voice commands. When I make a call I can hear the other person, but the other person does not hear me. TH-cam, and Music work but other apps like Facebook are muted. Any ideas what can cause this?

    • @jasongregorio4983
      @jasongregorio4983 9 หลายเดือนก่อน

      Same Bro I have a 2013 Chrysler 300 there's no voice recognition And the Bluetooth don't work says please wait I tried Everything Except Disconnecting the Battery I Guess I'll try that Tomorrow 🤞 if Anyone Knows Anything Please I'd Really Appreciate it 🙏

  • @Formerlywarmer
    @Formerlywarmer ปีที่แล้ว +1

    My 15 3500 randomly just doesn’t come back on wen I shut off my trk and restart it. I’ll try this the next time it happens hope it works. My radio is the smallest of the Uconnect touch screens.

  • @julioreyes8036
    @julioreyes8036 2 ปีที่แล้ว +1

    It work perfect thanks for saving me a trip to the dealership

  • @jeanconnolly1716
    @jeanconnolly1716 4 ปีที่แล้ว +1

    Hi mr diy geek. Our computer skips from one to the next fast. Example. I put it on heat lower legs. It’s started going from legs to face and legs to face only to windshield and back again over and over nonstop. Same with radio. Same with temperature. Started at 80 cause I was cold it kept dropping to 60 then 65 and so on and so on. Wont stay still. In one climate zone or temperature or radio station nothing. No. Stop moving. Can you tell me any ideas. Pls. Ram 2018 1500. 59k miles.

    • @jeanconnolly1716
      @jeanconnolly1716 4 ปีที่แล้ว

      We had to replace the screen. But thanx to wonderful ppl like you and the guy that shows how to change it out. We saved thousands and many many hours It only took 30 min. Thank you for being here for us 😘

  • @teresamardonroyallepageart419
    @teresamardonroyallepageart419 3 ปีที่แล้ว +1

    is there a way to completely disconnect the blue tooth system so it is not transmitting?

  • @cnwtrains
    @cnwtrains 3 ปีที่แล้ว +1

    Will it work with the 5" touch screen In my Tradesmen addition 2015?

    • @DIYGEEKTEXAS
      @DIYGEEKTEXAS  3 ปีที่แล้ว +1

      @Jon choochoo93 yes it should, I have heard this uconnect reset works with 2015 and above very well

  • @Jhakiryn
    @Jhakiryn 3 ปีที่แล้ว

    My 2011 Jeep Grand Cherokee doesn’t have a tuner knob. There’s a tuner and volume on back of steering wheel but it doesn’t reset it, I’ve tried 😢 is there any other way? My screen won’t allow touch but the buttons still function. It’s so weird. Any advice is helpful 🙏🏽

  • @KyleStrever
    @KyleStrever 3 ปีที่แล้ว +1

    Neither method works for my 2018 RAM 1500 8.4. Not on my original unit nor on the new one I had installed under warranty. Any other suggestions?

  • @yacyuuzi
    @yacyuuzi 3 ปีที่แล้ว +2

    Thanks man !! Shhiiittt, you really just helped me out

  • @futzalfan
    @futzalfan ปีที่แล้ว

    Ah! Was so hopeful, but no luck on either method. 2019 Jeep Rubicon. Off to the dealer.

  • @jericrodriguez568
    @jericrodriguez568 หลายเดือนก่อน

    Well when I press the two buttons at the same time. Whether I’m on ACC or Run, it just turns my screen off and it doesn’t reset. Any help?

  • @striivingg
    @striivingg ปีที่แล้ว +1

    Thank you very much works on 2016 lonestar hemi

  • @daaanielaaa
    @daaanielaaa 3 ปีที่แล้ว +1

    do you know how to reset the navigation my dad tries to check traffic and it doesn’t show anything trying to save him a trip to the dealership

    • @DIYGEEKTEXAS
      @DIYGEEKTEXAS  3 ปีที่แล้ว +1

      Sorry i do not know how to reset the navigation

  • @hotomani9947
    @hotomani9947 3 ปีที่แล้ว +5

    Thank you this helped a lot haha saved me a trip to the dealership

  • @smswaiver364
    @smswaiver364 3 ปีที่แล้ว +1

    Got my uconnect fixed thanks for this useful video!

  • @henrryjhon3700
    @henrryjhon3700 3 ปีที่แล้ว +1

    Just save me money thanks a lot I got the ram rebel 2016 it just work thanks for saving me money

  • @ilkinn7
    @ilkinn7 14 วันที่ผ่านมา

    ☹️😔 nothing seems to work on my 2012 GrandCherokee (. Throughout the whole ride, the monitor just displays the uconnect at the bottom right corner. The radio works but I’ve been stuck on the same FM since this summer. The monitor just cuts off and shuts every 30 seconds or so …. It goes black and then the word uconnect appears , I hear the radio play and then it all falls back into the pattern. I do not know what to do …

  • @mikeStmikey
    @mikeStmikey 4 หลายเดือนก่อน

    What about a 2023 work truck with the tiny screen?

  • @15gfountaine
    @15gfountaine 3 หลายเดือนก่อน

    Can't seem to get this to work on my 2021 due to the volume nob also being the power button for the screen

  • @jorgeanzaldua408
    @jorgeanzaldua408 3 ปีที่แล้ว

    Thanks for the video. It worked. My screen was unresponsive to touch.

  • @diketrielmcknight
    @diketrielmcknight ปีที่แล้ว

    Have dodge Durango 2016 and it didn’t work, any other hacks?

  • @BekaJibuti22
    @BekaJibuti22 ปีที่แล้ว

    it work for my 2022 ram. thnkss mann 🥃

  • @gunner56ify
    @gunner56ify 3 ปีที่แล้ว +1

    2020 ram 1500 ? What's the process on that?

  • @eugeneeugene4371
    @eugeneeugene4371 2 ปีที่แล้ว +3

    Hi guys! Have an issue with CarPlay, was press power volume and browse enter for 10-14 sec, since it shuts off, let it go then hit power volume once - it will starts and work again. No need to be switched off engine

  • @Ndersso
    @Ndersso 6 หลายเดือนก่อน +1

    You’re king, thanks!

  • @peytonthames6737
    @peytonthames6737 3 ปีที่แล้ว +2

    My uconnect is switching from my bluetooth to different sources (aux, radio and back to aux) all on it's on. Anyone have any idea if this method would fix it? Would really hate to have to take it up to the dealer. I have a 2014 Dodge Durango Citadel

    • @DIYGEEKTEXAS
      @DIYGEEKTEXAS  3 ปีที่แล้ว +1

      Sounds like your touchscreen layer is “delaminating” and it is sensing false touches. As far as i know only dealer can fix or replace.

    • @craiggamache7393
      @craiggamache7393 3 ปีที่แล้ว +1

      @@DIYGEEKTEXAS I started having the same problem with the radio switching out bluetooth into aux on it's own. My radio also started delaminating a couple months ago. You may have just got me the answer I've been looking for, thanks!

  • @kerrywood8979
    @kerrywood8979 4 ปีที่แล้ว +5

    Not just the older vehicles. My 2019 Ram 3500 with 12" Uconnect reset using the ACC and both button push and hold method. I tried the one where I held the index finger one the upper right corner of the screen and it didn't work for me.

    • @DIYGEEKTEXAS
      @DIYGEEKTEXAS  4 ปีที่แล้ว

      @Kerry Wood Thanks for letting us know. Your comment will be useful for somebody else who has 12" Uconnect!

    • @ericwang9407
      @ericwang9407 2 วันที่ผ่านมา

      My 2019 RAM 1500 Laramie with 12" Uconnect reset using #1 and 2# and it didn't work for me .do you have any update info? thanks

  • @j.e.8120
    @j.e.8120 2 ปีที่แล้ว +2

    How to you reset/recalibrate your AC system

    • @DIYGEEKTEXAS
      @DIYGEEKTEXAS  2 ปีที่แล้ว +2

      What do you mean by recalibrate AC system?

    • @j.e.8120
      @j.e.8120 2 ปีที่แล้ว +2

      @@DIYGEEKTEXAS i changed my blend door actuator now they are not opening at the same time. I think i have to calibrate it

    • @DIYGEEKTEXAS
      @DIYGEEKTEXAS  2 ปีที่แล้ว +2

      @@j.e.8120 I see, I think there is TECHNICIAN AREA within the Uconnect system that you need to go to. If not, you probably need special tool (programming tool) to calibrate the AC blend door.