Wonderfully informative editing & videography; answered all my questions about how this craft is carried out. It requires good skills and a LOT of solder.
Yes amazing work. No need for the leaded frames, Makes things a little easier, Just trying to find some nice decorative glass supplier, at reasonable prices,
@@d.i.l.l.i.g.a.f Good luck with your searching for quality glass. I haven't even started with the hobby yet, but the video was very educational. Perhaps I should give it a try. What country are you located in? Are you going to buy locally or use digital shopping?
@@BrassLock Have nothing locally as usual lol, So will have to look online, But have found a store with the type of thing i am thinking of, try a search for creative glass guild. Soldering irons can be got for quite cheap to begin with, 200w for less than 20, Have the copper tape already, a dremel to smooth the glass edges. Get some plumbers solder. I cannot get on with lead free solder, its awful stuff to use, and then for the final copper tone, it might have been wiped with copper sulfate or maybe CopperIt . Just need to have a fan blowing the lead fumes from the solder away from your face, and work in a well ventilated space. Only thing not looked for, is the faceted hearts shapes. I think you could make a similar sized shade for 40-50 quid for tools, then probably after it would be about 30-80 in materials for the first one, all depends on your design and wastage i suppose, but if you have the technical skill to do this for yourself. I would have never thought of just soldering copper tapes together. always thought you needed those special like a H channel lead rods to slide the glass in to start with.
@@d.i.l.l.i.g.a.f Yes, it was a surprise to see that copper tape holding it all together. I have all the tools for electrical work, and the rotary tool. Just need the copper tape and glass 😀
@@BrassLock Yes, also have most of the tools, besides the copper sulfate solution. But not sure if my 80 watt iron will be strong enough, to get a nice finish over a 200mm ish length of a joint, maybe it might just need a finishing pass with a narrow blow torch flame to get a smooth consistent line. Trial & Error i suppose, but watching this video, has sure given me the insight into having a go myself. Although all these overly bloody talented artistic people make these things look like a piece of cake lol. Might just get a cheap piece of plain glass to have a play with, before shelling out serious money for some nice coloured glass, Good luck with your project if/when you decide to have a go :)
Stunning - o my goodness I wish I could make these it’s a beautiful craft, in saying that tho I hope the glass isn’t made of sand, I hope there’s another way to make that product now.
Nice! I noticed you stood 2 panels together but wondered how you knew what angle to do this on without using a guide? Other videos have ALWAYS shown the panels sitting in a made up gauge. This is obviously very important to get it exact but you do not show how or have any subtitles thanks
The pieces are already angled at a predestined degree, so it's easy to solder them up without a jig... the angle of is formed from the jig (wood) when she piece those individual pieces together. The 3 pieces of wood are angled. Starts from 3.31min U can see those 3 pieces of wood are pre-angled at the required degree , so the formation of 2 sides of each pieces (lamp sheets) are molded in accordance to those angled wooden jigs
Que es eso color dorado? 04:00 Porque no se dispersa por el vidrio ese pegamento? O es estaño? Tan fácil parece... Great ! Awesome ! Que belleza al final!
The glass shade is beautiful, but the harp and the bulb are both too tall for that small shade. The harp, saddle, and bulb socket should not be visible from eye level. 7:19
У нас бы над душой стоял мастер или начальник: -- Быстрей! Скорей!! Давай! Давай! Что ты копаешься?! Давай! Быстрей!...Оперативно!!! И так до тех пор, пока не начнет всё из рук валиться и разбиваться об пол.
Amé hacer vitrales, es un arte muy hermoso, aunque a veces puedes herirte, pero es parte del proceso, tal vez más adelante vuelva a hacerlos, pero como un pasatiempos. Saludos a todos desde El Salvador
👀 Product in Video (영상 속 스테인드글라스) : '엠퍼센트' - bit.ly/37CsYzd
📧 Contact (문의) : allprocessofworld@gmail.com
أعمال رائعة جداً جداً ومتقنة بشكل جميل للغاية شكرا لصاحب القناة على هذا التقديم وننتظر المزيد من الفيديوهات شكرا لكم. 😎✋🏻
Класс!!!
여타 공예와는 달리 유리의 종류가 워낙 다양하니 정말 이쁘고 유니크한 공예인것 같아요. 잘보고 갑니다
음악이 항상 좋습니다 :) 공정과 음악이 잘 어울립니다.
OMG she makes it look so easy 😩. I’ve been working on the a single set of cabinet doors for nearly a year.
Haha
You might not want to make a living out of stained glass work.
I hope your doors turn out great
Wow so excellent job my friend ❤️❤️❤️❤️👍👍👍👍
Qué belleza!! Todo un arte!!! La felicito señorita, es usted increíble!!!
❤ Desde Argentina
أعمال رائعة جداً جداً ومتقنة بشكل جميل للغاية شكرا لصاحب القناة على هذا التقديم وننتظر المزيد من الفيديوهات شكرا لكم. 😎✋🏻
Wonderfully informative editing & videography; answered all my questions about how this craft is carried out. It requires good skills and a LOT of solder.
Yes amazing work. No need for the leaded frames, Makes things a little easier, Just trying to find some nice decorative glass supplier, at reasonable prices,
@@d.i.l.l.i.g.a.f Good luck with your searching for quality glass. I haven't even started with the hobby yet, but the video was very educational. Perhaps I should give it a try. What country are you located in? Are you going to buy locally or use digital shopping?
@@BrassLock Have nothing locally as usual lol, So will have to look online, But have found a store with the type of thing i am thinking of, try a search for creative glass guild.
Soldering irons can be got for quite cheap to begin with, 200w for less than 20, Have the copper tape already, a dremel to smooth the glass edges. Get some plumbers solder. I cannot get on with lead free solder, its awful stuff to use, and then for the final copper tone, it might have been wiped with copper sulfate or maybe CopperIt .
Just need to have a fan blowing the lead fumes from the solder away from your face, and work in a well ventilated space.
Only thing not looked for, is the faceted hearts shapes. I think you could make a similar sized shade for 40-50 quid for tools, then probably after it would be about 30-80 in materials for the first one, all depends on your design and wastage i suppose, but if you have the technical skill to do this for yourself.
I would have never thought of just soldering copper tapes together. always thought you needed those special like a H channel lead rods to slide the glass in to start with.
@@d.i.l.l.i.g.a.f Yes, it was a surprise to see that copper tape holding it all together. I have all the tools for electrical work, and the rotary tool. Just need the copper tape and glass 😀
@@BrassLock Yes, also have most of the tools, besides the copper sulfate solution. But not sure if my 80 watt iron will be strong enough, to get a nice finish over a 200mm ish length of a joint, maybe it might just need a finishing pass with a narrow blow torch flame to get a smooth consistent line. Trial & Error i suppose, but watching this video, has sure given me the insight into having a go myself. Although all these overly bloody talented artistic people make these things look like a piece of cake lol.
Might just get a cheap piece of plain glass to have a play with, before shelling out serious money for some nice coloured glass, Good luck with your project if/when you decide to have a go :)
한땀 한땀 수작업 작품도 멋있고
집중하시는 뒷모습이 너무 멋있어보입니다^^
Magnifique, merci pour cette belle vidéo, from France !
Faleminderit per kete video kaq te bukur qe te ben te mesosh dicka qe eshte art me vete . Pershendetje nga Albania .
우와 너무이뻐요 작품 만드는데 보는순간 빠져드내요 잘봤습니다
J'adore, merci de montrer votre travail. Vous êtes vraiment un artiste. Merci de nous avoir fait découvrir votre talent et vos idées ingénieuses.
Que maravilloso trabajo un artista excelente felicidades ..saludos desde Chile
Витраж даже в виде лампы отлично смотрится. 😊
Genial! Hermoso! 👏👏👏👏👏
ขอขอบคุณ
Really speaking it's an eye opener for me to know how these hand made glass shades are made. Superb and educative video. Thanks for the presentation.
Великолепно! Золотые руки!
Qué Bonito e Interesante Video. Todo un Profesional. Gracias por Éste Regalo y Bendiciones
Thank you, good to see how it is done. A very pretty lamp !
I'm so impressed by your craftsmanship! I think there were a lot of great time saving tips shown here too- thank you!
Очень интересно было наблюдать за процессом. Результат порадовал 💞👏👍
Heart touch and amazing videos ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️ best work, good luck ji, thank you very much,
Very good Video . Skill, Patience and Ideas make perfection . 👍 From Taminadu India .
Leaded art glass is one of the most relaxing hobbies that I really enjoy doing
eso es poesía para mis ojos!
😍😍😍😍
Qué belleza!!! Soy de Argentina, trabajas de forma muy practica me encanta, felicidades!!! Yo aprendí, más complicado, saludos🤗
Amazing artist 🌌💚
ORIGINAL TIFFANY....SPECIAL LUXURE AND FANTASTIC.
This is magical.
Спасибо за очень интересное видео!
Ха!
Jo que linda te pasaste me encantó !!!!!
Truly impressive. What a beautiful lamp!
Wonderful creation.
Nice work!
Great job. That is a lot of work.
I would understand if the product is worth a hefty sum, the craftsmanship is pure talent.
Brava bellissima lampada. Per ordinare il materiale dove posso rivolgermi grazie. 👍👏👏👏👍👏
Тонкая, однако, работа. Красиво.👍
와~~ 공업용납 엄청 들어가네요.. 폐기시 중금속 주의 해야겠어요. ;;
Лампа шедевр
Que buen trabajo. Muy bello. Muchas gracias.
Beautiful TH-cam Channel. Hello from Costa Rica.
Это искусство!)))
Muito linda essa peça, parabéns.
Looks great!!
Enjoyed your video and I gave it a Thumbs Up
Muito bonito, adorei a arte ❤️
Abraço aqui do Brasil 🇧🇷
Harikasınız teprik ellerinize sağlık çok güzel işçilik
Interesting process. I have great liking as it somehow resembles jigsaw puzzle ♥☺👌
Nice Work..
Very nice Job. Congratulations
Very nice work
Apik..,luar biasa...👍👍👍👍👍
Супер, класс👍👍👍👍👍👍👍
wow! you did a nice job.
So adorable
Que bonito trabajo!!
Stunning - o my goodness I wish I could make these it’s a beautiful craft, in saying that tho I hope the glass isn’t made of sand, I hope there’s another way to make that product now.
Wonderful video. Thanks.
May I have the list of the materials?
Hermoso trabajO!! Quisiera saber como hace los corazones? Son de vidrio?
Salam dari Indonesia,,,
Великолепно очень красиво !
Nice! I noticed you stood 2 panels together but wondered how you knew what angle to do this on without using a guide? Other videos have ALWAYS shown the panels sitting in a made up gauge. This is obviously very important to get it exact but you do not show how or have any subtitles thanks
The pieces are already angled at a predestined degree, so it's easy to solder them up without a jig... the angle of is formed from the jig (wood) when she piece those individual pieces together. The 3 pieces of wood are angled. Starts from 3.31min U can see those 3 pieces of wood are pre-angled at the required degree , so the formation of 2 sides of each pieces (lamp sheets) are molded in accordance to those angled wooden jigs
Thanks for sharing your knowledge
기술 좋네요
Que es eso color dorado? 04:00 Porque no se dispersa por el vidrio ese pegamento? O es estaño? Tan fácil parece... Great ! Awesome ! Que belleza al final!
Es estaño, el cual sólo se adhiere al cobre que se puso en los bordes de las piezas. Muy interesante.
I enjoyed that.
배우고 싶습니다.
Beautiful... 😘
Night-time photo/video of the lit lamp would have been nice.
So beautiful
Excelente trabajo
بہت خوب ، کیا کہنے ہیں
6:28 What is the chemical used here that gives the finished tin soldering a copper-like appearance?
Vary nice 👌
Wow amazing 👍🏻👍🏻
Que es eso que le aplicas con el pincel
ЭТО ЧУДО!
Where to you find the medal piece for top of shade? This is a big help
Very good videos ... can we see backpack and leather bag mfg in korea
Fantastic 🥰
Классно 👍
Nice 👌
What liquid do you use before welding?
Its so intricated and beautiful...make me wang one....
But its would easy to break....🤔👍
Hola de donde son ???
The glass shade is beautiful, but the harp and the bulb are both too tall for that small shade. The harp, saddle, and bulb socket should not be visible from eye level. 7:19
У нас бы над душой стоял мастер или начальник:
-- Быстрей! Скорей!! Давай! Давай! Что ты копаешься?! Давай! Быстрей!...Оперативно!!!
И так до тех пор, пока не начнет всё из рук валиться и разбиваться об пол.
What is the white you stapled to the wood called pleased? Great work it looks beautiful!
@@annarock8966 Thankyou very much for getting back to me x
I love this....so impressive
do you use tin to solder?
Elinize sağlık çok güzel oldu, avize ayaklarını alabileceğim bir yer varmı, yardımcı olursanız sevinirim. 👋🇹🇷
원데이클래스에서 배웠는데 생각보다 힘들었지만 다만들고 나니깐 뭔가해냈다는 뿌듯함이있었어요.시간이금방가더라구요
Estoy interesada en comprar herramienta de vitrales??
Pero no se donde conseguirlas
Amé hacer vitrales, es un arte muy hermoso, aunque a veces puedes herirte, pero es parte del proceso, tal vez más adelante vuelva a hacerlos, pero como un pasatiempos. Saludos a todos desde El Salvador
Ehat is the liquid using for soldering...plz
Оборудование и средства защиты на уровне, но нет души в работе, работы очень простые, стекло простое, рисунок очень простой, Китай есть Китай)
Ale piekne mistrzostwo
Hermoso gracias