Rc truck dump box

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ธ.ค. 2013
  • Testing limit switch operation to prevent damage to screw drive.
  • บันเทิง

ความคิดเห็น • 44

  • @rcfarm15
    @rcfarm15 10 ปีที่แล้ว +1

    What a great looking mechanism...simple, clean and functional, good job!

  • @thestuffz
    @thestuffz 10 ปีที่แล้ว

    looks good!

  • @RCP57
    @RCP57 10 ปีที่แล้ว

    Perfect!

  • @tracksntreadslou
    @tracksntreadslou 10 ปีที่แล้ว +1

    I like it ..Good work mario

  • @Kinghauler2012
    @Kinghauler2012  10 ปีที่แล้ว +1

    Thanks guys! It's always nice when you draw something up and when you build it, it works! No smoke! Lol.

    • @vladimirtesic3749
      @vladimirtesic3749 4 ปีที่แล้ว

      this is my rc 6x6 th-cam.com/video/OpJtSZ1LBoM/w-d-xo.html

  • @DieselJunkie12v
    @DieselJunkie12v 10 ปีที่แล้ว

    what did it cost

  • @pencintasatwa2942
    @pencintasatwa2942 4 ปีที่แล้ว +1

    halo i'm from indonesia i like your works

    • @Kinghauler2012
      @Kinghauler2012  4 ปีที่แล้ว +1

      Mas Tori . Thank you. Glad you enjoy. :)

  • @Bassam...
    @Bassam... 4 ปีที่แล้ว +2

    Well done ... very beautiful

    • @vladimirtesic3749
      @vladimirtesic3749 4 ปีที่แล้ว

      this is my rc 6x6 th-cam.com/video/OpJtSZ1LBoM/w-d-xo.html

  • @UnwrappingByMimiKoteng
    @UnwrappingByMimiKoteng 3 ปีที่แล้ว +2

    Amazing

  • @nordinhaidry7972
    @nordinhaidry7972 4 ปีที่แล้ว

    This us amazing! I like that. I will try to make one 😆

    • @vladimirtesic3749
      @vladimirtesic3749 4 ปีที่แล้ว

      this is my rc 6x6 th-cam.com/video/OpJtSZ1LBoM/w-d-xo.html

  • @samsungdive8504
    @samsungdive8504 5 ปีที่แล้ว

    Please tell about dc motor...

  • @christophercruz4739
    @christophercruz4739 8 ปีที่แล้ว +1

    Awesome! Im building a crane for my tamiya truck trailer. Where I can find the ball screw with the nut ? Or if you can also tell me the dimension of that screw. Thanks!

    • @Kinghauler2012
      @Kinghauler2012  8 ปีที่แล้ว

      The system was built for me by a friend of mine. He used a acme thread rod I think 12tpi. The end of shaft is cut down to fit a small roller bearing. The nut is homemade and fitted with a pin on each side to fit the yoke.

  • @ihbuilder74
    @ihbuilder74 10 ปีที่แล้ว

    good job , Mario

  • @edwardarnoldiii824
    @edwardarnoldiii824 10 ปีที่แล้ว +1

    Looks awesome where did you get the motor for the dump. cause I building a dump trailer and was looking for ideas on how to make it dump

    • @Kinghauler2012
      @Kinghauler2012  10 ปีที่แล้ว

      Thanks for commenting. There are many strength motors to chose from but it's the thread pitch on the shaft that really determines The power and speed of the mechanism.
      Here is a great site for various motors and gear drives
      www.robotshop.com/en/motors-actuators.html

    • @edwardarnoldiii824
      @edwardarnoldiii824 10 ปีที่แล้ว

      Thanks for the info I really appreciate it.

  • @banditone5220
    @banditone5220 5 ปีที่แล้ว +1

    Very nice

  • @CLAUDIOSRC9529
    @CLAUDIOSRC9529 ปีที่แล้ว +1

    cool cool

  • @dedyconcept2965
    @dedyconcept2965 3 ปีที่แล้ว

    The hydraulic drum is sold at dialiexpres, not boss

  • @rovdest
    @rovdest 2 ปีที่แล้ว

    nice

  • @dayarao1555
    @dayarao1555 5 ปีที่แล้ว

    good job.please share motor and voltage used .thank you

    • @vladimirtesic3749
      @vladimirtesic3749 4 ปีที่แล้ว

      this is my rc 6x6 th-cam.com/video/OpJtSZ1LBoM/w-d-xo.html

  • @UDAY8133
    @UDAY8133 3 ปีที่แล้ว

    you used telescopoc pipe where did you get that what is the thickness

    • @Kinghauler2012
      @Kinghauler2012  3 ปีที่แล้ว

      Actually it's solid aluminum and just cut to look like a pipe.

  • @UDAY8133
    @UDAY8133 3 ปีที่แล้ว

    what is the Esc you are using for connecting motors ?

  • @UDAY8133
    @UDAY8133 3 ปีที่แล้ว

    can you a share a video or photo of nut and pin and aluminium pipe connected to it

    • @Kinghauler2012
      @Kinghauler2012  3 ปีที่แล้ว

      Jeep Lovers . I'll try and get some pics for you this weekend. In the meantime check out this video which does show the tube and nut on the threaded rod.
      th-cam.com/video/XqReoXCzzw0/w-d-xo.html

  • @dillonyoung5111
    @dillonyoung5111 8 ปีที่แล้ว

    Could you please give a link to that exact gear motor

    • @Kinghauler2012
      @Kinghauler2012  8 ปีที่แล้ว

      I think this was the one..... www.robotshop.com/en/6v-95rpm-metal-gearmotor.html

    • @dillonyoung5111
      @dillonyoung5111 8 ปีที่แล้ว

      thanks man

    • @vladimirtesic3749
      @vladimirtesic3749 4 ปีที่แล้ว

      this is my rc 6x6 th-cam.com/video/OpJtSZ1LBoM/w-d-xo.html

  • @pintuverma879
    @pintuverma879 7 ปีที่แล้ว

    how much RPM motor required.?

    • @Kinghauler2012
      @Kinghauler2012  7 ปีที่แล้ว +1

      Pintu Verma if I recall correctly this is the motor used along with a acme threaded rod.
      www.robotshop.com/en/metal-gearmotor-1576.html

    • @vladimirtesic3749
      @vladimirtesic3749 4 ปีที่แล้ว

      this is my rc 6x6 th-cam.com/video/OpJtSZ1LBoM/w-d-xo.html

  • @ebrarmaket688
    @ebrarmaket688 5 ปีที่แล้ว

    👍👍👀👏

  • @DieselJunkie12v
    @DieselJunkie12v 10 ปีที่แล้ว

    Would you build me one of these?

    • @Kinghauler2012
      @Kinghauler2012  10 ปีที่แล้ว

      Sorry, I'm not the builder of the box. It was done by a friend of mine. He has a TH-cam channel. RCP57 is his name. Check it out.