How To Repair Dash Bezel | Ford Bronco OBS F150 F250 F350 | 3 Common Issues
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- This video provides Dash Bezel Dash Trim repair for Ford Broncos and F-Series trucks F150 F250 F350 The three most common issues: 1.Broken Mounting Pins 2. Broken Switch Bosses 3. Screw Hole Repair Behind the Horizontal Trim. Bezel removal video link is below!! #bronco #fordbronco #f150
PLEASE HELP SUPPORT THE CHANNEL IF YOU ENJOYED THE CONTENT.
PayPal: n2kpi@yahoo.com
Venmo: @broncosandparts
Cashapp: $broncosandparts
It really help with keeping the videos flowing, the lights on and with shop supplies. Even a few bucks.
Letting all the ads play during the video also helps a tiny bit too.
Thanks!!
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Please Like and Subscribe.
LINK TO BEZEL REMOVAL !!!
How To Remove Dash Bezel / Cluster Bezel | Ford Bronco OBS F150 F250 F350
• How To Remove Dash Bez...
*************************
Product Links:
J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz
amzn.to/3Ci5KNp
FROGTAPE 1358464 Multi-Surface Painter's Tape with PAINTBLOCK, Medium Adhesion, 1.88" Wide x 60 Yards Long, Green
amzn.to/34jsMHa
*************************
Follow along on:
/ broncosandparts
@broncos.and.parts on Instagram
Email : n2kpi@yahoo.com
We sell used Ford Bronco and Truck Parts
87-96 Ford Bronco/ OBS Ford F-Series Bucket Seat Cushion is on sale for $135 plus ship. Will not fit 40/20/40 (these are in preorder status)
I take Venmo, PayPal, Zelle, Cashapp or mail me a check.
Email me at n2kpi@yahoo.com for more instructions.
Please remember to include your full name, EMAIL and mailing address
Nice! I linked over from the OBS Ford Trucks FB page. Glad I did.
Thank you !!
So glad I found this video and channel. Going to repair my old bezel this week.
Glad I could help. I sell the pins and screws!
Thank you! I have a 95’ F150. I bought a new replacement dash for it, but didn’t include the 3 metal pin-clips that go along the top. It looked like I could screw them on, but I didn’t know how to get a screw driver in them. Your demo popping them open, nipping off little tab, and using skinny screwdriver saved the day! Wish I had found this sooner I would have JB welded the thing back together and save some $$.
glad it helped! Lots of OBS videos here!
Another nice Ford video.Thank you.. I need these 3 clips for the 95 Bronco...
Also...Solved the problem of the broken plastic screw mounts for the rear window and for the 4WD functions my making brackets for each and mounting the switches to the dash. The bezel goes on and off a lot easier too. Thanks for all your handy videos !
Glad it helped. Was my first video ever. I’ll have more pins avail to buy in about 10 days. Email in description.
Thx, Chris. Another fantastic video with great insights and perspectives along with an easy to follow, step-by-step narrative approach and practical hands on demonstration. Keep up the great work, my friend 🎉👍👏👏
Thanks!!!
Please don’t forget to subscribe for more content !!
Ok..Now a subscriber. I really dont do faceB etc...where can we buy those pins / clips..Thanks in advance jP
@@jacksmail7725 my email is in the video description. Just click on title. I’ll have pins in 2 weeks.
thanks for the tip about the top mounting screws. just what my '94 F-150 needed.
Perfect!!
Thank you for taking the time to make this! I think these techniques are gonna save me some serious $$$! 😅
Thank you. Glad it helps!!!
thankyou very much for these tips as a 16 yr old i appriciate the advice for my 97 superduty
No problem. Fun easy fix!!!
Hi... In the video you use Water Weld, but in the description you link to Plastic Weld. Which one do you recommend? I used Water Weld yesterday and the little lumps I made to replace the bosses are still squishy 24 hours later
I used the water weld because it specified plastic as a key material it sticks too. As you see, mine set up pretty quick. I did have one bad batch on another fix. Perhaps you got a bad stick as well. It really needs to be mixed well.
Thanks I’m currently dealing with this same problem and you really helped me…
Fantastic. I sell the pins and screws too.
Thanks brother! I just picked up a 1994 F350 and this is just one of the many repairs this old girl needs (on my budget). Appreciate your videos and content. Now if you had a good one on best way to re-align the driver door on my rig I'd send you some beer. ;-) cheers
Change the hinge pins!!! Or replace the striker bushing!!!
Super detailed and clear. Thank you!
Hope it helped and saved you some $$
Hell yes. Yet another great video and saving me some money.. Nice man. Really appreciating the time you are taking with these videos...
again, great detail. no fluff. all how to!!
Glad you liked it!
Saw your FSB forum post. You do a great job hope to see many more. Keep up the good work.
Thank you
Awesome video, Thanks Chris !
Glad it helped!!!
Esa bronco es toda una belleza
Thank tou
J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz
amzn.to/3Ci5KNp
FROGTAPE 1358464 Multi-Surface Painter's Tape with PAINTBLOCK, Medium Adhesion, 1.88" Wide x 60 Yards Long, Green
amzn.to/34jsMHa
Good video Chris! Would’ve never thought of the water weld. Always tried to use jb quick.
Both would work I just chose water weld because it sticks to plastic the best
thanks so much for this video! it's exactly what I needed to know.
No problem. Enjoy!!
This is a great video. Hopefully it will save some of the unique irreplaceable Bronco bezels that would otherwise be thrown out and replaced with F150 bezels. Can you tell us what size screws you use for the 3 top pins?
I had a bin laying around. I could mail you some
where can I find the three top pins. I am missing them.
I’m out of them right now. Email me in a few weeks. I sell used bezels too
@@BroncosandPartsGarage Can you point me to where I can get some of those mounting pins?
Thanks, Chris! I did all three repairs.
Question: what size are the screws that hold the 3 clips in place along the top of the bezel?
Tiny. Lol. I’m not sure. I has 100’s laying around. I could mail u some. Just pay postage
Shoot! Great videos, thanks, but as I peel apart my Bronco, I have two issues: 1) don’t even HAVE the top clips (do you know where I can find them?), and 2) what size screws should I use for the rear window and 4wd switches? Mine were, if you can believe it, TAPED to the back of my dash bezel
In description there is my email address. I sell the top pins. Click on title to see description.
Chris, always great content.. Have a couple OBS here in new mexico, you keep mentioning rust. What is rust? (lol sorry had to man).
That’s mean. Just mean bro. Lol
Chris thanks for the video! Do you know what size screw you used to reattach the clips?
Small!! I just had a box of about 1000
Email me. I’ll send you a pic of the size
You made an interesting comment in the description you get more "credit" if viewers let the ads play rather than skipping them? I didn't know that, I am going to start watching more ads now. The more you know! ;)
Hey Chris, just found this channel. Great content. I just picked up a '92 f150 Flareside Nite edition. The dash bezel is falling out of it. Just ordered the LED's anf JB weld. Going to do it all at once. I'm down in Temperance MI. Maybe I'll run into you some day.
Hit me up with any questions. Let the jb weld putty set up a little longer than I did in the video. You’ll be fine. Head over to “Broncos and Parts Garage” on FB and introduce yourself.
Great video. Thank you.
You are welcome!
@@BroncosandPartsGarage I got the bezel off, and yes, somebody had yanked on it instead of unscrewing it. They did it hard enough with break off a chuck of the bezel just above the trim piece, but not evident from the front. I was thinking of using JB Weld to glue it together across the back side, or do you think there's a better approach?
Great video!
Thank you
Game Changer
Thank you
Nice Tips!
Thanks!
will you do a fog light switch install. like one from a lightning.
We have a lightbar switch going in
Great video! Even I could do it. Ebay sells the clips for 36.99 for 3. Which I think is rediculous. Is there anywhere else I can buy the clips? Ok. I found it 4.99 for 20 at amazon.
Good luck!
Awesome thanks…
Our pleasure!
I would like to know how to repair or even to replace the inside door plastic as look like bad and I’m holding it with tape so need help where to get it new better . I have a 1996 f150 5.0 single cab
Email me some pics. My Email in video description
I can’t even find a 19 96 Bezil ,, I ordered a new one and instead I got a 3-D printed bezel with no defrost slot. Where do you get the 1996 Bezel? Ty
I sell them
Any chance you know where to get that exact bezel replacement that has the whole for the defroster switch. Seems nearly impossible to find….
I sell them. Used. Email me n2kpi@yahoo.com
@broncosandpartsgarage how can I contact you about purchasing some of those bezel mounting clips?
My email is in video description. Thx
The problem I have with the three clips is that they don't stay attached to the bezel when I remove it. They just pull off the plastic "nipple" that's they attach too. Do you know of a good fix to keep that from happening?
That’s a great question, it’s addressed in the video and I show you how to permanently mount those top pins to the bezel itself. Fast forward to the eight minute mark on the video
Hi what size screw is used for the 3 top holders?
No idea. I just had a huge can of them. lol.
@BroncosandPartsGarage this my first ford. Lololol
Where can I buy a dash bezel and other dash parts?
Click on video title. Scroll down to description and shoot me an email.
Hey Chris.....subb’d
Thank you !!
Do you have 3 mounting pins?
Yes. Email me. I sell them
@@BroncosandPartsGarage just sent email
Do you have 1987 and 1997 f350 parts for sale for sale
Yes. Send me an email.