Really good tutorial. I don't know why but other tutorials miss crucial steps. This is saving hundreds of hours of frustrations by going through this tutorial and I understand how and why you do each step so it is not blind rote learning.
Hey man thanks for the course, really really nice, for those watching you can put the speed to 1.75x and it's still very clear, just if you wanna save some time.
Sir After selecting "Center, Diameter" for circle when dragging on the line (as shown in video) it doesn't show midpoint, instead endpoints are highlighted on both lines (vertical & horizontal lines). On right clicking and selecting midpoint, it does show midpoint on both lines but, both lines midpoints are not intersected with dotted line to show center of the circle. What to do? I use AutoCad LT 2020 thanks
Sir the angles from the horizontal lines are not tracing in my PC so the whole drawing is getting another dimensions what should I do can you please tell . I also wanted to know how the tracing scale for lines and angles are showing.
Bro how to pan screan mean how to drag down drawing while dragging the cursor sign makes a sign of hand tell me how to drag ...... i was actually questioning about that
@@CADCAMTutorials could you please explain more? I'm a bit poor at solving problems related to mathematic and geometry maybe that's why i can't understand. For example,you wrote 45 degree in one side. But in the other side you wrote 90+45=135. Why?
Have you used geometry protector? It is the same. Angle measurement starts from right side i.e. zero degrees and increases towards left. Therefore if you want to go in 45 degrees in left side you will have to add it to 90 to workout total angle.
Actually,if I'm not mistaken i got it. So,the letf side of the right will be decrease,and as well as the right side of the left. But the left side of the life and the right side of right will be increase.
THANK YOU SO MUCH. I feel so lucky and grateful to subscribed to your channel.
Really good tutorial. I don't know why but other tutorials miss crucial steps. This is saving hundreds of hours of frustrations by going through this tutorial and I understand how and why you do each step so it is not blind rote learning.
Tracking 03:07
Circle centre track 04:26 05:15
Parallel snap 09:18
Shift+ right click to see list of tangents.
Giga chad
Hli
Thank you very very much
After 30 years gap I again getting very nice explaination
Thankx ones again
You're welcome 😊
Thank you Engineer really is helpful and super simple
let me thank once again your lecture is super presentation I have ever come across
Thank you very much indeed!
I really appreciate how you explaining the lesson!
1min in and its already better than my teacher ffs
Thank you 😊
True ❤
Excellent explanation....easy to understand....thank you
thank you so much for the tuitorial sir... nice and easily explained... heartly thankful
You're welcome 😊
How to use parallel line and extension line, great demonstration for complex part
th-cam.com/video/2ni0AWbloQA/w-d-xo.html
Easy to understand. Thank you!
You're welcome 😊
thanks brother it helps me a lot
You're welcome 😊
I just created my own drawing so proud of me, thank you, this really helped me ❤❤❤❤
Great job!
Hey man thanks for the course, really really nice, for those watching you can put the speed to 1.75x and it's still very clear, just if you wanna save some time.
Sir which type of software laptop used for autocad program please tell me which generation laptop need to learn autocad
Yey. Im re learning this autocad this lockdown. Thank you!!!!
thanks for the info really helped alot. i rather learn about tNice tutorials than school
Very Good Method of teaching . . . Thank you for this video Best of luck
You're welcome 😊
Thank you for such awesome videos and excerises
You're welcome 😊
Thanks for make it easy for beginners
You're welcome 😊
PEACE BE ON YOU. WELL DONE BRO. KEEP IT UP.
Thank you 😊
Dhanyawad guruji 🙏
You're welcome 😊
Thanks for the tutorials, I am learning a lot
Hi teacher ! Thank you for your videos sharing it's amazing knowledge as my channel in Cambodia
You're welcome 😊
Sir After selecting "Center, Diameter" for circle when dragging on the line (as shown in video) it doesn't show midpoint, instead endpoints are highlighted on both lines (vertical & horizontal lines).
On right clicking and selecting midpoint, it does show midpoint on both lines
but, both lines midpoints are not intersected with dotted line to show center of the circle.
What to do?
I use AutoCad LT 2020
thanks
Make setting as per this video
th-cam.com/video/8OMcjIGHdFg/w-d-xo.html
It worked
This video derserves more likes.
Thank you 😊. It means a lot.
you a gift from God by creating lectures. How do get in conduct with u for further consultation, including MATLAB?
Best one dude ...keep rocking
Thank you ❤️
You're welcome 😊
Thanks for this great video
Very nice , congratulation Bro
Thanks a lot
thnk you man actually i have that problem of making sure of the midpoint in first draw
did you got a solution for this problem
th-cam.com/video/8OMcjIGHdFg/w-d-xo.html
At 1.40. What do you press to enter the length? Also what do you press if you want millimeters?
Thankyou for this guide I really appreciate it
You're welcome 😊
My hero
Thank a lot sir 💚
AWESOME! This is very helpful!!
Thank you
You're welcome 😊
Best class
What is the difference between diffrent auto cad versions like 2020,2014 etc??
Sir i am unable to point centre in the right corner square to form circle
Thank you so much sir
Best teaching
What is going to press to specify the angle after putting 135?
TAB
Awesome 👍🏻
Thank you 😊
thanks for this beautiful presentaion.
can u tell me what kind of configaration pc we need nto run this softwear
Good ticher
Thanks
Great
Excellent explanation. Thank you Sir
In Circle drawing i am not getting the centre point automatically like yours am using 2018 autocad can u solve that problem.
Same logic for center point: th-cam.com/video/d6n8H6PzzGI/w-d-xo.html
No i got it in snap settings.
And nice class sir thanks for ur efforts
You're welcome 😊
Nice Sir 👍
Sir when I am press TAB button it takes ok/enter in that what can I do
when i change from model to layout the image is very faint on white background what should i do to make it visible darker?
Can you make a video on how to find constraints and use locking dimensions in the Parametric menu.
th-cam.com/video/9VXf5sOVbEU/w-d-xo.html
Where is the previous video. There is no link
Thank you sir :)
super good
awesome video. thank you
You're welcome 😊
To make the new drawing you have said to click on plus button how to bring that tool bar. Drawing 1 , drawing 2 , drawing 3
What is your AutoCAD version
Circle is not able to locate the midpoint? Why
th-cam.com/video/d6n8H6PzzGI/w-d-xo.html
How about for printing this into paper? will i get the actual measurements?? Thank you!
Yes.
@@CADCAMTutorials Thanks bro. I am studying AutoCAD again. Your uploads are great.
Hello sir , in 2nd drawing the angle can be shown is automatically , what to do to see that angle?
Make polar tracking ON:
th-cam.com/video/IU7agZtYRnk/w-d-xo.html
thanks 🙏🏻
Very nice tutorial... Sir, where can we download the exercise files?
How to set a limits for civil engineering drawing and what type of units i have to take...for that
th-cam.com/video/mqZBfuItwII/w-d-xo.html
Im using the free version to learn and most of these additional shape features doesnt come with that version
in 5:21 how did you give the circle a height of 80? i cant do it
Track mid point and specify distance of 80
Why mid point showing for me. When i put pointer on there
th-cam.com/video/d6n8H6PzzGI/w-d-xo.html
@@CADCAMTutorials thanks
In the last drawing, the two lower tangents intersect with each other.
lovely, really beneficiary, urs is very easy method of teaching and i got good knowledge
Very helpful
Would you make a tutorial for drawing "Mobile housing" using autocad inventor ?
Thank u sir
Gud evening sir . I want to asked about AutoCAD . May you help me sir ?
Is dis teaching for mechanical students.. please reply if yes den I wanna start dis course..
Yes.
I’d love to learn this program but the cost is ridiculous unfortunately
Sir the angles from the horizontal lines are not tracing in my PC so the whole drawing is getting another dimensions what should I do can you please tell . I also wanted to know how the tracing scale for lines and angles are showing.
th-cam.com/video/SPmNP8q47JM/w-d-xo.html
Hi
Sir the centre point is not tracking at all in my pc 2016 version autocad
Sir i can not open tamplets please give solution for that
Are u legend
where is the link to the drawings dude?
How to down load this software on my computer
❤❤❤
Check the tangent lines under the big circle. Its incorrectly done
At 30 secs what is the word he is saying?
I have autocad 2013 and m not getting that tab option while selecting the angle, vry difficult for angle selection
th-cam.com/video/SPmNP8q47JM/w-d-xo.html
How could i find midpoint.. it is only show the end point
Here is solution: th-cam.com/video/d6n8H6PzzGI/w-d-xo.html
Bro how to pan screan mean how to drag down drawing while dragging the cursor sign makes a sign of hand tell me how to drag ...... i was actually questioning about that
Press middle mouse button and drag the mouse
@@CADCAMTutorials middle.......?
Scroll on mouse
@@CADCAMTutorials laptop dont have midlle button guide me about laptop's mouse
@@WaqasAhmed-th4lo You have to type P followed by enter. The cursor will changed to the hand. You can pan the screen. Actually the P means the PAN.
Hey bro, I really would like you to reply to me because it's so important. I didn't get why did you wrote either 135 or 45 or nothing as degree
@@CADCAMTutorials could you please explain more? I'm a bit poor at solving problems related to mathematic and geometry maybe that's why i can't understand. For example,you wrote 45 degree in one side. But in the other side you wrote 90+45=135. Why?
Have you used geometry protector? It is the same. Angle measurement starts from right side i.e. zero degrees and increases towards left. Therefore if you want to go in 45 degrees in left side you will have to add it to 90 to workout total angle.
@@CADCAMTutorials didn't you mix right and left?I mean the left side you mentioned is right to me
Actually,if I'm not mistaken i got it. So,the letf side of the right will be decrease,and as well as the right side of the left. But the left side of the life and the right side of right will be increase.
sir my midpoint is not getting tracked
i am not able to select two midpoints at once
press F11 with F3 to get reference lines
Does anyone know how to do tangent line between two circles for AUTOCAD 2021
Can anybody tell me where from i can learn it all in feet and inches
th-cam.com/video/q3LPIWXiJsQ/w-d-xo.html
Pls make tutorials on Solar Photovoltaic cell design in Autocad
sir, how can i show the measurements of my drawing??
just as it is shown in the sample drawings?
th-cam.com/video/ucFma7SgZ70/w-d-xo.html
th-cam.com/video/EQdGiO5Xt9U/w-d-xo.html
@@CADCAMTutorials thank you sir
How to do in auto cad
👍
Why my 100mm is showing larger but not your ?
Use acadiso.dwt template
@@CADCAMTutorials in 2007 how to use
Same problem with me
Use acadiso.dwt template and don't use acad.dwt template
Sir... mid point is not getting highlited for a line sir!!
Make midpoint object snap ON.
@@CADCAMTutorials thank you sir
Sir give the diagram download links please,it helps for me to practice