If you want my suggestion George - put a camera right on the front of the box one looking left and one right. I’ve had them on the front of my baling rig this year and it’s revolutionised bad gateways and blind junctions. I bought bulkhead camera wire fittings off Amazon and have hard wired them onto the front plate of the tractor so now we can put up to two cameras on anything front mounted. It’s such a safety feature, and is well worth the effort in my opinion. Then just got a 4 way camera screen in the cab, run the two fronts on split screen so you can see both ways at the same time. Absolutely brilliant
George, you had me squirming in my seat watching you attach that transfer! First, decide on exact placement. Then remove a little bit of the backing on the top left corner and stick down. Gradually pull off the remaining backing, smoothing out the transfer as you go. Easy. 😅 The FasTrac looks great, though oncoming traffic will be long gone before you’ve dipped all those lights!
With the sticker Gorge. Just peel back bout an inch. Offer it up and apply inch piece then continue pulling off back paper and stick as you go. The whole lot looks great
Won't matter what you write on the front everyone will be binded by the light of a collapsed sun. The old Fasttracs 170hp I reckon 165 is used just to power the lights.😅. Good job George. 👍
Great work, it looks fantastic!! A lot of time and money on all the projects, fair play. Just another tip for the decals you could use a dry cloth around your hand and it will make it easier to rub the decal on, about an inch at a time no bubbles..
That box is the Bollox George. Blinded by the light indeed . I'd have Fastrac painted on in jcb yellow ( or a decal) . Yes it's the crawlers turn now . All the best
That looks really well George! But i think i would prefer the lower headlights of when the upper ones are on. All the lights reflecting on the box would distract me 😅. But it does look sharp 😊
Good Evening George, I want one o how I would like that George you have done magnificent job, I hope I don’t meet you coming the other way I better put my sun visor down, Ones again well done. You stay safe and well and regards to your family.🚜🚜🚜⭐️⭐️👍👍
Oooffft, looking tidy and bright! I think JCB along the front will finish it off nicely….. you are running out of projects mate, it’s a bugger getting all the jobs done 👍
Good one george . keep ploughing away, it can be Harrowing at times and combining running a farm and being a YOU TUBE star,Dont Bale out now, the channel is growing and we look forward to more.😀😀
Very Nice Job George N O B🤣 on the box or JCB I need better lights on my NH after driving home with a load of straw Friday night Thanks again Have a good Week
Stainless plate with Saunders under the lock and vinyl with the farm name on your lid 👍🏼👍🏼 would look well smart think slapping JCB on it would be a bit over the top
Hello George there’s no point doing half a job thinking back to what she looked like when you got her and how she looks now is tremendous and the nob box now it has its stickers on and top painted don’t look so plain a nice JCB badge would look cracking on the front look forward to the next video keep up the good work 👍👍
You'll have to watch George....... The bloody planes will start trying to land at night at the farm.... 😅😮🤪... Think a nod to your TW on the front would be rather fitting... 😊 stainless TW badge etc.. good work on the lights sir.. stay safe 🏴
re bonjour George c est énorme les lumières sur le dessus de la masse je verrai bien un tracteur jcb noir avec le logo jcb en dessous en autocollant , bon courage a toi pour la suite 😍👍👍👍
I don't fancy your electricity bill ! (Will the box clear speed bumps...around our part of the world the powers that be would rather build a 6" high bump than fill in pot holes) The name on the box..... "If you didn't see this, try SPECSAVERS".
The nob box looks good George. Regarding stickers, I know your not stupid but have you ever tried doing it by only peeling so much of the back of it off, stick that to where you want it and then unpeal it ?
If you want my suggestion George - put a camera right on the front of the box one looking left and one right. I’ve had them on the front of my baling rig this year and it’s revolutionised bad gateways and blind junctions. I bought bulkhead camera wire fittings off Amazon and have hard wired them onto the front plate of the tractor so now we can put up to two cameras on anything front mounted. It’s such a safety feature, and is well worth the effort in my opinion. Then just got a 4 way camera screen in the cab, run the two fronts on split screen so you can see both ways at the same time. Absolutely brilliant
Good idea chief 👍
George she looks the beast.good job done mate well-done.💪💪👍👍👍
Great addition George looks cool 😎
George, you had me squirming in my seat watching you attach that transfer! First, decide on exact placement. Then remove a little bit of the backing on the top left corner and stick down. Gradually pull off the remaining backing, smoothing out the transfer as you go. Easy. 😅
The FasTrac looks great, though oncoming traffic will be long gone before you’ve dipped all those lights!
Wow mate !!! Incredible job. !!! SAUNDERSTRAC !!! Stick this there
😂
Great job, looks super cool, suits you 👍👍👍👍
The lights are some job. I live in Ireland and could see the lights when you turned them on 😂😂
That's a great addition to the fleet George. Be very useful during the coming winter months.
A super job on the box George, the lights look great. Excellent job George 🚜🔧👍
“Can you see me now “
Written on the box plate 😂
With the sticker Gorge. Just peel back bout an inch. Offer it up and apply inch piece then continue pulling off back paper and stick as you go.
The whole lot looks great
JCB fast track 🎉nob box top job
fantastic video George 👍 cracking job you done on the Nob box looking great
Won't matter what you write on the front everyone will be binded by the light of a collapsed sun. The old Fasttracs 170hp I reckon 165 is used just to power the lights.😅. Good job George. 👍
I think it should be called THE BEAST, well done George hard work does pay off, keep it up
See and be seen - well, you certainly will be George!?, looks absolutely stunning.
. 😎🤩🚜👍
Georges knob box 😂 that would be funny to have on the front
Hallo george Nice to See the Box for front linking with LED lights
Hey George, love your outfit. Your front box, fastrac and your trailer looks bloody well, and i love your lights.
Mighty job George, have a good week👌👍🙏😎
You must have one of the best 3170s about, it looks totally badass with the box and all the lights on now 👌 😎
Great work, it looks fantastic!! A lot of time and money on all the projects, fair play.
Just another tip for the decals you could use a dry cloth around your hand and it will make it easier to rub the decal on, about an inch at a time no bubbles..
That box is the Bollox George. Blinded by the light indeed . I'd have Fastrac painted on in jcb yellow ( or a decal) . Yes it's the crawlers turn now . All the best
Looking superb George
You should put ‘NOBBY’ on the box.. but bloody hell, tractor runs would be great with that! Nice work boyo!
Geee! That's some light, be careful you don't get arc flash from all of it!🤣
On the box - "Sport Fans!"
I have the the og rytec in jcb colours… it’s often used in their social media platforms for advertising… you just can’t beat a good box for storage!!
That looks really well George! But i think i would prefer the lower headlights of when the upper ones are on. All the lights reflecting on the box would distract me 😅. But it does look sharp 😊
And in the front of the box " move over" in mirrored writing, so everybody can read it in their inner mirror 😆
Hi George, I reckon the sign on the front should say Move It.
Great set up , carry on the good work.
Very nice mate fits the fastrac a treat, you should call it " George's Nob" lol
I am not sure if its diffrent in UK, but in germany the stripes have to build a triangel (facing up) so you done all 180° rotated
Black JCB decal on the lid.
Good Evening George, I want one o how I would like that George you have done magnificent job, I hope I don’t meet you coming the other way I better put my sun visor down, Ones again well done. You stay safe and well and regards to your family.🚜🚜🚜⭐️⭐️👍👍
A picture of "Dangerous Dave" hanging out of the lid
Oooffft, looking tidy and bright! I think JCB along the front will finish it off nicely….. you are running out of projects mate, it’s a bugger getting all the jobs done 👍
Great job George 🚜🚜
Crackin lights them 👍 Looks the muts nuts m8
JCB looks the business George. Well done. I think a bigger beacon bar on the roof would finish it of perfect.
Handled your nob very well❤
Looking smart. I think “Howdy Folks” should go on the box, then you could get “see you on the next one, ta tar!” On the back of the trailer!
Your calling I’m hauling would look good on the front of the box
Very nice,💯 just need a big square baler on the back of her now George 😉👍
George great video that box needs a JCB sticker right on the front that'll be a proper job👍👍👍
Great video jcb is looking great george 👍👍👍
Hello George.
great looking JCB. How about adding "CANINE TESTICULAR" or "JCB Model THE CANNNE TESTICULAR"
Good one george . keep ploughing away, it can be Harrowing at times and combining running a farm and being a YOU TUBE star,Dont Bale out now, the channel is growing and we look forward to more.😀😀
No one can say they didn't see you coming! 😂
Looking good that George 👌🏻
I'd just put 'saunders' on the front, its yours and be proud of it 👍🏻
Very Nice Job George N O B🤣 on the box or JCB I need better lights on my NH after driving home with a load of straw Friday night Thanks again Have a good Week
They should see you coming now mate
Think you should have jcb on the front mate or boyz lol
On the front bottom of the box writting, “The Beast”??
You’ve done well with those red stickers mate, I would’ve had it all in a ball and stuck to my head 😂😂🤣
Ta Ta for now on box George love it
The Yellow Peril
Looks great George 👍
You should have put a plum line down from the back edge
You couldn't see but I measured it numerous times and marked on the box where it should sit👍
Stainless plate with Saunders under the lock and vinyl with the farm name on your lid 👍🏼👍🏼 would look well smart think slapping JCB on it would be a bit over the top
It looks good, might get a few cats flashing you but that won’t last long once you get them back, I’d say put a job box plate on the front
I’ve no words George… no words 😆👌👍👍
You never showed us the back lights,what they like?
Now I have noticed the chevron is upside down, should angle down to the extremity 🙈
Nob box on the front lol
JCB in black on the top of the box if you ask me .
You better hope a plane does not try to land in the field with all those lights looks like an airport all by it self 😂 but sure looks awesome 🤩
Cracking job George she looks the dogs if you know what i mean.... Take care sir....
Everyone going get arc eye when they see you on road 😂😂😂
Box looks good George dont scuff it haha😊🚜👍
Jcg for the box front she looks amazing m8, what about the rear lights ??
Yea I'll get them sorted as well 👍
Hello George there’s no point doing half a job thinking back to what she looked like when you got her and how she looks now is tremendous and the nob box now it has its stickers on and top painted don’t look so plain a nice JCB badge would look cracking on the front look forward to the next video keep up the good work 👍👍
Nice on George. Just get Ta Ta on it?
9:41 great content again
Very nice George. Personally I’d put a jcb sticker in black like the door on top of the box. But that’s my kind of tractor 😘😎
Put the Fastrac logo with "Proper Job" underneath 😊
That fastrack is the beauit if it was me I would put something like either JCB or fastrack..... whatever the series is
nice vid George ..
Suggest JCB on the front, ties it all in nicely.
So George, put you on the spot, whats now your favourite between the tw and JCB?
Muckers madness. On the the front
Hi George. Love your lights. What will they be like when you lift the weight box up high enough to drive down the road.
I haven’t got a tool to put in a nob box
Where did u get the 2 light bar beacons
On the box?
For plates put JCB on the left and UTV Lights on the right?
It has to be nob box on the front 😂
‘LordMuck for parliament’ enough said for a name plate Saunders 🤦🏼♂️😂
You'll have to watch George....... The bloody planes will start trying to land at night at the farm.... 😅😮🤪... Think a nod to your TW on the front would be rather fitting... 😊 stainless TW badge etc.. good work on the lights sir.. stay safe 🏴
How much clearance under the box? Looks quite close to the ground.
It's on front linkage so goes a lot higher
re bonjour George c est énorme les lumières sur le dessus de la masse je verrai bien un tracteur jcb noir avec le logo jcb en dessous en autocollant , bon courage a toi pour la suite 😍👍👍👍
Howdy's folks how ya doing - or to wind mukka up do well😂😂😂
Nob box also know as the bell end box... 😂
You should put road king on the box.
Better write something on that box quick before a friend writes... "Send It!" across the front. 😉
That box looks menacing now. How about "R.I.P."
I don't fancy your electricity bill ! (Will the box clear speed bumps...around our part of the world the powers that be would rather build a 6" high bump than fill in pot holes) The name on the box..... "If you didn't see this, try SPECSAVERS".
Comment for the algorithm to help the channel 👍.
…….and the Lord said … let there be light 💡……..,and there was!!?!! 👌👌👌
Looking good, just put nob box on the front. Ha Ha.
Good shout!😂
If it’s ever a dull and gloomy day, just break out the FastTrack
How many beers you had in this video 🤣🤣
I thunk cars are going to be f ing blinded George but i could be wrong.
The nob box looks good George. Regarding stickers, I know your not stupid but have you ever tried doing it by only peeling so much of the back of it off, stick that to where you want it and then unpeal it ?
I'll have to try that method 👌