@@m0ck1N9jay possibly, but the possibility of triggering on motion is already there. I made a pcb where you can place a development board. If you want to you can lose the development board and create a pcb where you solder a esp on directly. Saves some space but have to program the esp separately or put the right components on there to program it and less accessible for the majority of the viewers.
Awesome! - Question. I've LD2410 + ESP32 mini and they work really great. - Only thing i want to upgrade is the zone detection. My current zone detection is only distance - will i be able to use your setup for that?
As far as i know the difference between the LD2410 and LD2450 is that the 2450 can detect direction and thus locate the presence (3 targets and 3 zones) the ld2410 cannot. I could not find a solution yet for your question. If i find it i will let you know.
translation of the question: good afternoon! Where can I get the PCBway board and the 3D file to print the box? answer: I just uploaded them to my patreon page where you can download them, if you have further questions please let me know. www.patreon.com/lickylauda Desculpe, tive que traduzi-lo primeiro antes de poder responder, acabei de enviá-los para minha página do patreon, onde você pode baixá-los. Se você tiver mais dúvidas, por favor me avise. www.patreon.com/lickylauda
@@licky-lauda that’s fantastic, I’ve seen the cheap ready made ones but only did 1. Others required lots of programming when DIY, this just seemed so simple 👍
@@sentyuk5322 if you follow the directions in the first part of the video it is not that hard. The files are available on my Patreon page. you can access them as a free member.
@@KlutchenkoSerge you can copy paste the whole yaml file from my patreon page. That should be formatted the right way. I think it is a extra space or wrong indentation.
@@licky-lauda Again after copy/paste Message malformed: extra keys not allowed @ data['Custom Card'] (Lastest version of HA ) stuck at 3:38 of your vidéo ...
@@KlutchenkoSerge I just took a look at it: Custom Card: null type: custom:plotly-graph title: mmWave Radar Sensor refresh_interval: 1 hours_to_show: current_day I think the difference is “null” behind custom card:
@@licky-lauda Thank you for your answer. I will try to use the Home Assistant file editor. However, I have no idea what name I should give to this file and where to save it. Do you have this information? Thanks again. I specify that the detector works well.
your video quality presentation is so amazing but do you know why your video is not getting the expected views? Your channel needs some updates to increase the view
i've been trying for weeks to get my esp32 board to work with my LD2450. In less than 5min this dude got me up and running. Kudos my friend!
Thanks! Very helpful video! I have the parts lying around for a couple of months now but hadn't found a clear tutorial such as yours
set trigger id's helps shorten the automation setup
May be a good idea to use some background music instead, preferably without vocal.
Great vid man
Can the tx RX manipulated become relay level trigger. And no need Esp series again like the pir motion sensor
@@m0ck1N9jay possibly, but the possibility of triggering on motion is already there. I made a pcb where you can place a development board. If you want to you can lose the development board and create a pcb where you solder a esp on directly. Saves some space but have to program the esp separately or put the right components on there to program it and less accessible for the majority of the viewers.
Awesome! - Question.
I've LD2410 + ESP32 mini and they work really great. - Only thing i want to upgrade is the zone detection.
My current zone detection is only distance - will i be able to use your setup for that?
As far as i know the difference between the LD2410 and LD2450 is that the 2450 can detect direction and thus locate the presence (3 targets and 3 zones) the ld2410 cannot. I could not find a solution yet for your question. If i find it i will let you know.
I didn't find the bin's link send to the graph code. Or i miss something ?
It’s here : www.patreon.com/posts/diy-mmwave-106417982
@@licky-lauda yes but the files to flash the esp32 ? I just see the Plotly Graph Card Code.
@@kojakjako9986 i re uploaded them. you can find them now.
Does 2450 detect not moving?
Yes it supports presence besides movement. and it supports presence for up to three targets.
boa tarde!
onde eu consigo a placa da pcbway e o arquivo 3D para imprimir o box ?
translation of the question:
good afternoon!
Where can I get the PCBway board and the 3D file to print the box?
answer:
I just uploaded them to my patreon page where you can download them, if you have further questions please let me know.
www.patreon.com/lickylauda
Desculpe, tive que traduzi-lo primeiro antes de poder responder, acabei de enviá-los para minha página do patreon, onde você pode baixá-los. Se você tiver mais dúvidas, por favor me avise.
www.patreon.com/lickylauda
Very cool, how many people can it track at the same time?
Up to 3
@@licky-lauda that’s fantastic, I’ve seen the cheap ready made ones but only did 1. Others required lots of programming when DIY, this just seemed so simple 👍
@@sentyuk5322 if you follow the directions in the first part of the video it is not that hard. The files are available on my Patreon page. you can access them as a free member.
I'm stuck with YAML
Message malformed: extra keys not allowed @ data['Custom Card']
is it here ?
Custom Card:
type: custom:plotly-graph
title: mmWave Radar Sensor
refresh_interval: 1
hours_to_show: current_day
.....
Thanks:
@@KlutchenkoSerge you can copy paste the whole yaml file from my patreon page. That should be formatted the right way. I think it is a extra space or wrong indentation.
@@licky-lauda
Again after copy/paste
Message malformed: extra keys not allowed @ data['Custom Card']
(Lastest version of HA )
stuck at 3:38 of your vidéo ...
@@KlutchenkoSerge I just took a look at it:
Custom Card: null
type: custom:plotly-graph
title: mmWave Radar Sensor
refresh_interval: 1
hours_to_show: current_day
I think the difference is “null” behind custom card:
@@licky-lauda Thank you for your answer. I will try to use the Home Assistant file editor. However, I have no idea what name I should give to this file and where to save it. Do you have this information? Thanks again.
I specify that the detector works well.
@@KlutchenkoSerge if you edit your dashboard you can choose to edit the card you are trying to add in yaml. Here you paste the code and then save it.
Mooi gedaan! Wilde dit al eens proberen. Subscribed.
If only your software wasn't in, what is that, Dutch?
Gibberish to this viewer anyhow, and I'm from bloody Sweden!
xD
@@1986MarcThulander it is in Dutch, I try to do as many in English as I can.
your video quality presentation is so amazing but do you know why your video is not getting the expected views?
Your channel needs some updates to increase the view
I will try to put out more, or I can make different parts. Thanks for your input.