wow your company is a lifesaver for me. my 2014 focus ST got backed into in a parking lot and it crunched the driver fender up. I was just reviewing the steps needed to take the fender off because i was going to order an OEM fender, take it to the local body shop, and have them paint it. low and behold you sell exactly what i need for about the price i expected to pay to have it finished. talk about one stop shop. part ordered. looking forward to seeing the quality of your work. thanks so much.
Kris! Thank you so much for ordering and this video will help guide you to installing the fender with ease! Just saw your order and will make sure it’s extra well taken care of on our end. Have a great week.
How confident are you in the color matching of your fenders? I have a Ford Focus 2015 Metallic Magnetic gray, but am worried about having to repaint the fender I buy from you all if its off.
We have a full money back guarantee on color match. Our success rate is 98.72% and what I recommend is sending us your gas lid or a small sample from your car. We want you to 100% satisfied with your order
Hello! That is the "inner fender insulator pad" that I think lessens road noise. They are pretty annoying but Ford has it in there for a good reason, I'm sure. They're pretty inexpensive and they may also stop debris, possibly... Please subscribe, it helps us grow! 🤘
Hello. No, they did not. There are some plastic clips on the rocker panel. The bottom fender just had a couple bolts. Thanks for watching and please subscribe!
You will need a 10mm socket wrench or open wrench. You will also need a panel clip removal tool for the plastic clips. You can also use a flat-head screwdriver to pop the clips off. For the headlight, you will need a star hex bit or screwdriver for the top bolt. You will also need a panel clip removal tool or a flat-head screwdriver to remove plastic clips.
Two things you mentioned...the bumper removal and bottom molding removal....you didn't show how to remove...you only mentioned that we to have to figure out how to remove...why make a how to video ...if you're not gonna show how to
Thanks for watching! Yeah, labor, paint and shipping costs money. Us small businesses can't all compete with Bezos. But, you'll probably find if you go to your dealership we're probably cheaper for paint and labor
You must be fun at parties. Literally you type in “star bit” and all the sets you need pops up. Mechanics that are too technical like that piss me off.
wow your company is a lifesaver for me. my 2014 focus ST got backed into in a parking lot and it crunched the driver fender up. I was just reviewing the steps needed to take the fender off because i was going to order an OEM fender, take it to the local body shop, and have them paint it. low and behold you sell exactly what i need for about the price i expected to pay to have it finished. talk about one stop shop.
part ordered. looking forward to seeing the quality of your work. thanks so much.
Kris! Thank you so much for ordering and this video will help guide you to installing the fender with ease! Just saw your order and will make sure it’s extra well taken care of on our end. Have a great week.
Watching this as the car I acquired got the same damage on the left side fender 😅
Awesome video man, thank you. My neighbour slammed my car and I’ve been trying to figure out those damn plastic pins for longer than I’d like to admit
Haha yeah the small things are the ones that is hard to figure out . Glad the video helped out bro. Go to www.ReveMoto.com
All you need is a flat head and this video 😊
How confident are you in the color matching of your fenders? I have a Ford Focus 2015 Metallic Magnetic gray, but am worried about having to repaint the fender I buy from you all if its off.
We have a full money back guarantee on color match. Our success rate is 98.72% and what I recommend is sending us your gas lid or a small sample from your car. We want you to 100% satisfied with your order
At the minute 8:53, what is that thing pulling off? How did you call it? And what is it for? Thanks
Hello! That is the "inner fender insulator pad" that I think lessens road noise. They are pretty annoying but Ford has it in there for a good reason, I'm sure. They're pretty inexpensive and they may also stop debris, possibly... Please subscribe, it helps us grow! 🤘
Got it. Thank you…keep up with the good work 👍🏾
This was very helpful 👍
Glad it helped! Have a Happy New Year! 🍾
Over 900 guys I keep looking had my hopes up
@@Majinverse what did you need help with?
thanks one bolt was rusted at the bottom i grinded it off luckily. sold wing for 60 gbp!
did the two screws on the bottom of the fender have a u clip or anything holding them in?
Hello. No, they did not. There are some plastic clips on the rocker panel. The bottom fender just had a couple bolts. Thanks for watching and please subscribe!
Will this still be the case for a 2014 ST?
Hi Nick, yes it should be since they use the same fender. Let us know if you run into any issues!
Step one. Remove the wheel to make access easier..
That would actually be a lot more complicated than just turning the wheel.
Everyone chill nabd
What all tools did you use ?
You will need a 10mm socket wrench or open wrench. You will also need a panel clip removal tool for the plastic clips. You can also use a flat-head screwdriver to pop the clips off. For the headlight, you will need a star hex bit or screwdriver for the top bolt. You will also need a panel clip removal tool or a flat-head screwdriver to remove plastic clips.
I think it would be easier to lift the car and remove the wheel. Use a jack stand of course for safety.
Nope agree but some of my audience are not comfortable with taking the wheel off.
❤
Thank you so much for watching! Go to www.Revemoto.com if you need any car parts
Two things you mentioned...the bumper removal and bottom molding removal....you didn't show how to remove...you only mentioned that we to have to figure out how to remove...why make a how to video ...if you're not gonna show how to
Heu dude, just jack up the car, take off the wheel, will make it a lot easier, totally worth the time
That’s one way to do it. Definitely worth a try
Remove wheel it’s easier
Most people don’t want to. So I just show it this way
Thanks for Vidro. But $750 for a painted fender that costs $100 primed on Amazon? 😅😂😂😂
Thanks for watching! Yeah, labor, paint and shipping costs money. Us small businesses can't all compete with Bezos. But, you'll probably find if you go to your dealership we're probably cheaper for paint and labor
they are not called star bits and it's peeving me, they're referred to as TORX bits lol
Yes. They are called torx bits but I wanted the non mechanic to understand the tool I was using.
You must be fun at parties. Literally you type in “star bit” and all the sets you need pops up. Mechanics that are too technical like that piss me off.