Dustin. Thanks for the videos. I have a new to me original 5209 that works well. A NI 5209 mechanic went through it last year and all is good. Your video helped me to tackle the annual maintenance. As you suggest, job one was to purchase the maintenance manual. Cheers.
Good job! I am considering rebuilding my 5209. It leaks a little grease out the bearings/seals between gear boxes. A winter project! Thanks for posting your rebuild my friend. Cheers.
Excellent video. Longer is better for video so you can detail things. I have a turtle that has way to much play and am afraid of grenading it. Hopefully just bearings are tired.
Shane Holst. Thanks for checking it out, I cut some yesterday afternoon for a guy down the road and it worked pretty good nothing went flying out anyway haha. Thanks again for watching l know your really busy and I really appreciate it!
Tom thank you very much for taking the time to watch, I really do appreciate it. I’m no teacher by any means but maybe someone will find it useful, I just really couldn’t find much of anything about working on one of them on utube.
The cutter bar is driven off the left side, the hex shaft goes into the gear box so maybe it broke the hex shaft or the gearbox has could have troubles in side not real sure I guess
Hi, I'd like to start off by saying. Thank you for taking the time to make these videos. Because it has helped me in diagnosing and doing repairs on my own 5209 cutter bar. I am in the process of repairing a broken shaft segment. And I'm wondering if you think that the shafts are hardened or if I could use a piece of shaft from the welding shop. Thanks
I’m not sure if the factory shafts are hardened or not, I just went to my local welding shop and they made me one out of regular hex shaft. I’ve been running the same shaft since I made that video with no troubles yet. If it starts to feel like there’s getting play I’ll just have another made and slide it in, it really didn’t cost that much I was surprised. Glad the videos helped!
Hmm sorry to hear that, I like mine but there are times that I think my old conventional haybine was better. Not as fast but less maintenance. Hope your able to get it going again
@@jimmuse9584 not really, just step by step as to what the manual said. You you want, give me a way to email you or contact you some way and I can copy those pages for.
Dustin. Thanks for the videos. I have a new to me original 5209 that works well. A NI 5209 mechanic went through it last year and all is good. Your video helped me to tackle the annual maintenance. As you suggest, job one was to purchase the maintenance manual. Cheers.
Your welcome, glad you liked it!
Good job! I am considering rebuilding my 5209. It leaks a little grease out the bearings/seals between gear boxes. A winter project! Thanks for posting your rebuild my friend. Cheers.
Thank you I appreciate the feedback. Hope it is of some help to you!
Excellent video. Longer is better for video so you can detail things. I have a turtle that has way to much play and am afraid of grenading it. Hopefully just bearings are tired.
Glad to see you got it back together! Best of luck hopefully it doesn't give you any greaf for a while!👍
Shane Holst. Thanks for checking it out, I cut some yesterday afternoon for a guy down the road and it worked pretty good nothing went flying out anyway haha. Thanks again for watching l know your really busy and I really appreciate it!
Excellent
Good explanation Dustin. Good job. You take care my friend.
Tom thank you very much for taking the time to watch, I really do appreciate it. I’m no teacher by any means but maybe someone will find it useful, I just really couldn’t find much of anything about working on one of them on utube.
Good how to Videos man! Sure aughta be useful to someone with the new idea MOCO's!
Rocky Run Angus Ranch hey thanks for checking it out. I’m not very good at videoing but I hope maybe it’ll help somebody.
Hello Dustin Adams I have a 5209 just like yours and the rollers work but the cutters doesn't want do I need to do
The cutter bar is driven off the left side, the hex shaft goes into the gear box so maybe it broke the hex shaft or the gearbox has could have troubles in side not real sure I guess
Playing catch-up.. finally made it to part 2!!
Hi,
I'd like to start off by saying. Thank you for taking the time to make these videos. Because it has helped me in diagnosing and doing repairs on my own 5209 cutter bar. I am in the process of repairing a broken shaft segment. And I'm wondering if you think that the shafts are hardened or if I could use a piece of shaft from the welding shop.
Thanks
I’m not sure if the factory shafts are hardened or not, I just went to my local welding shop and they made me one out of regular hex shaft. I’ve been running the same shaft since I made that video with no troubles yet. If it starts to feel like there’s getting play I’ll just have another made and slide it in, it really didn’t cost that much I was surprised. Glad the videos helped!
Thanks!
I just rebuilt a 3309 case and ran for 10 minutes and it started hitting I put all new bearings and gears in it and I can’t believe it wrecked
Hmm sorry to hear that, I like mine but there are times that I think my old conventional haybine was better. Not as fast but less maintenance. Hope your able to get it going again
@@dustinadams9136 is there anything special that you did to get yours in time
@@jimmuse9584 not really, just step by step as to what the manual said. You you want, give me a way to email you or contact you some way and I can copy those pages for.
@@dustinadams9136 765 657-0444
Should have asked your co worker if he knew how to fix it.
Spare parts, backwards parts.. all normal 👍😂🤣🤬🤬
Gosselin Farms Ed Gosselin yup pretty much everything I expected 🤪
Hello Dustin Adams I have a 5209 just like yours and the rollers work but the cutters doesn't want do I need to do