ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Tisas Zigana PX-9 G2 Tabletop Review and Field Strip
ฝัง
- เผยแพร่เมื่อ 17 ส.ค. 2024
- 0:00 Tisas Zigana PX-9 G2 Tabletop Review and Field Strip
0:30 In the Box
3:53 A look at the Zigana PX-9 G2
9:29 Field Strip
14:19 Thank YOU Patrons!
More content is available at the depot, www.GBGunsDepot.com
Follow us on Instagram: / gbguns
Looking for Something you saw? www.gbgunsdepo...
5% off at Optics Planet with code, "GBGuns" we don't earn a dime but it shows you support us!
Find the gear we use and approve of: www.amazon.com...
Support this channel with some swag at www.cafepress.com/GBGunsMerch
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 66 [ซับไทย]](http://i.ytimg.com/vi/qcaUguFlwdM/mqdefault.jpg)
I BOUGHT ONE AND LOVE IT, ABSOLUTELY NO PROBLEMS. BOUGHT ANOTHER FOR THE HELL OF IT.
Got the gen 1. Great gun. Stiff safety that has to be worked in and I put Hogue grips on it. Obviously they updated the grips, and the safety appears to be manipulated easily. Good job addressing gen 1 issues.
I have the G1, Px9, and it's one of the best handguns I own, and I own a lot. I bought it because it was a 9mm, striker-fired, and came with a crap load of stuff. I took it to do my LTC class and was shooting better than 90% of the class, and some were using .22lr pistols and weren't doing nearly as good as this $300 gun. I would highly recommend this gun over all over, even Canik and Girsan, which i own one of each, and this one is my personal Home-defense weapon. Can't wait ton get my hands on a G2.
Better than a canik?? I THINK NOT!
do we have a healthy discussion here?
Note: The manual was later found under the foam on the lid side. It had adhered to the foam and so wasn't seen upon initial inspection. Article: www.gbgunsdepot.com/post/tisas-zigana-px-9-g2
I've had one for a year and I think it's actually better built than some Caniks but only time and round counts will tell. A well built 9mm for 300 dollars that takes Sig P226 mags all day long and the holster is great too.
If its better than a Canik that makes me want to buy one.
@@DanielLewisSEO Better built but my Canik is WAY more accurate in my hands.
Bought mine from @ClassicFirearms.
So I bought one for my Pop for Christmas last year 2023 when the price went up $50.00.
He loves it and has put more rounds through it than I have mine.
He's a 77 years old Vet.
I've had this gun going on 2 years. First handgun I ever bought and I love it. I'm planning on buying the Tisas 1911 clone for my next handgun.
WoW!! WiN for Tisas! 🤘🏻🤘🏻 I bought an xd mod 2.0 last year, now I wish I’d have waited! Nice! That holster is just Brilliant!
I 've been shooting this gun since May of last year and it has been reliable . Mine has the Philippine national police Crest on the slide and came with two 15 rd magazine. I added 3 sig p226 magazine to this gun for range use. Replace the front sight with night fision tritium with orange ring and made it easier to see . Traction grip is now available . This is the first table top review since Dan the firearmguy reviewd it last year.
From where do u got ur sig p226 mags online?
Are those talon grips? And what front sight did you use?
@@Jeff-xn1ew similar to talon grips , its called traction grips. The front sight is Night fision tritium with orange ring . Compatible with M&P 2.0
Damn that is a nice and intelligent feature on that holster.
I have 1 and it shoots soooo smooth.
It’s an FN-XD-HK combo.
Loaded chamber indicator on the top as the Springfield. The instruction manual is behind the foam on the top.
I wonder how this goes up head to head with the Sar Arms CM9. Close in price, one is striker and the other a hammer fried. Both polymer frames. Both pretty good.
They compare the PX9 with the Glock 19...but so much cheaper
Thanks, been considering this as my next option
Now that you made the vid, watch an see, they will be sold out an go up in price. It imitates mys Xd's almost to a T. But have been looking at them for a backup piece. Thx for the vid
In some ways they've even improved over the XDs
I have the XD9 and absolutely love it. Been wondering if I should get this or get the XDM next. (I have several other guns already)
I have a c 9Hi point. This pistol blows it out of the water. This is a great pistol
I had a C9 that despite being a brick it was reliable as could be, it actually preferred steel cased ammo but would eat everything.
I just got a new PX9 today and took it to the range and true, puts the C9 to shame.
Ill put my zigana px9 gen 2 pistol up against Almost any 9mm pistol. It performs flawlessly, great feel little recoil, shoots like butter. I cant believe i got it for approximately $324 dollars, it was a steal,and that was before it went on sale!!!! That's CRAZY!!!!!!!!❤❤❤😊😊😊
Very cool and comfortable
Great video, I now learned what I needed to learn safely
Excellent reviews, both table top and at the range. Thanks
Thank you
Holster already done from safariland
Accepts P226 magazines and you can replace front sight with Smith & Wesson M&P 2.0 front sights. $249 right now over at Palmetto State Armory.
Just picked it up after watching this vid. Seems like the best $300 gun going
I just saw it on PSA and looked for the review on TH-cam. So tempted to buy it... I just sold my XD, and upgraded to XDS for EDC.
@@moziz212ny Instead of the Gen2, I bought the Gen3.....it's much better gun.
What about the recoil spring replacement. Will the xd9 fit
Can you replace the sights with Springfield XD night sights? Or any other night sight setup?
I bought the Tisas Zingana PX9 ... I found the manual pull out the top foam a little and in insert was the Manual
I got the first Gen of this with very different grip about a year ago or so I’ve put over 1000 rounds through it without any problems at all. Mostly 115 grain I shot well with and even some aluminum case worked well. Might have to get the gen 2 or 3 now
I had just purchased one and it feels good in your hand there about a 5 lb trigger.have not shot it yet .also just purchased a sub2000 gen 2
And I finally found a holster for it too. JM customs
Nice option to the SA XD-9 I just bought.
Removable front sight and an adjustable rear sight. While my 92 has a stupid wide front sight and an iron brick with a cut that they call rear sight.
Exelente Arma estoy encantado con el desempeño y comodidad de portabilidad.
So an XD , Masada and Taurus got drunk 😵
🤣🤣🤣🤣 dude I literally said the exact same thing
Thanks
250 shipped at PSA today
DITTO 250
Just bought one fod 200 bucks. Im sure it a gen one version. Has thd holster and thres 15 round mags. Hopefully it holds up to all the good reviews.
Bought this one today.
Man the frame, safety, and trigger setup reminds of a Tx22 & Masada.
But the overal gun is more like Springfield XD
Thanks for the video Graham! Sense the Gen 2 includes various grip plates, can you tell me what the min/max grip width is?
Taurus Tx22 lower XD upper. Need I say more?
Just picked up two on centerfire systems for 199 each!!!!
Love my gen 1 it's the goods.
I get the feeling all these Turkish handguns (SAR, Canik, Tisas, Stoeger) are the same gun internals stuck in a cosmetically different polymer frame. Kind of like they do with all those Turkish made tactical shotguns imported under various brand names.
They are all 90%+ copies of European designs.
Just got a v1 and my XD9 threaded barrel dropped in and locked up easy, And my Sig P226 mags also seem to fit. PS , The mag catch/release is easy to switch for us lefties.
Just bought one, good to know on the mag release. Looks like the holster that comes with is only for righties tho, which is a real bummer if so. Looks like a nice owb holster!
@@hughjassole1430 could possibly use it crossdraw...
@@vistawindowwashing314 yea, I’m not a big fan of that carry position tho. I think I’ll just look for another owb holster if anything.
I bought this gun almost two years ago. Love this gun! I have a few different ones and by far it my favorite. I found that the Sig P226 mag work better in the gun. I have found one issue with the recoil spring over time the spring thread’s itself. Any suggestions would be appreciated
Are the sights compatible with Springfield XD night sights?
Sir plz tell me about the primer drag issue as i have it in new px 9 gen 2
I wish I could find a Gen 2. The gen 3 look nice but I want the manual safety and I don't like the design of the new slide so much it's too poofty for me.
Mine had a manual under the foam in the top of the case, but it's only index card size. maybe it slid down in yours.
I got my new Zigana PX-9 G2 and I love it. Great value for the price. Can you explain what are the alternatives to mount a red dot on it. I saw that the Gen 3 comes optics ready but this one don't. Please share red dot options from amazon that will fit the gen 2 if possible. Great review, by the way.
Thank you. This pistol does not have a means of mounting a dot.
I carried an XD for a few years and the backstrap safety never really bothered me and I appreciated the full ambidextrous layout. However, I think I like the way that this firearm is set up better. I like the customization of grip like the VP9 and quite honestly it is like the lower is a cross between a Sig 320, an M&P, and a VP9. The manual thumb safety does not bother me either as I grew up on 1911s and DA/SA hammer fired pistols and carrying cooked and locked was normal and I trained for years having to swipe off a manual safety. To be completely honest it is complete muscle memory and I find myself swiping striker pistols that do not even have a thumb safety. If the review proves that this firearm is a shooter I may have to invest in one for a duty sized pistol. Have you ever considered doing longterm high round reviews? I would be curious how some of these bargain guns hold up over the long haul.
Thank you. We have but there's no way to prove that round count other than just believing the guys who claims it. The other issue is the cost of ammo, and the biggest issue is just time. We both have real jobs which leave limited time for this.
@@GBGuns that is understandable. I would be curious if there is cross compatibility between an M&P or Springfield XD as far as Trigger replacement is concerned? It would be amazing if an Apex system could be swapped to improve the trigger feel and performance. I looked everywhere to find this model and nobody has it. Everything I found was the Gen 1 for 299.00
Looks a like Fn.
With the muzzle of a Springfield and an HK grip 👍😄
original design was the HS2000. This model is interesting.
Yup, and HS Produkt has kept Springfield in business
@@GBGuns Agreed.
Do all Gen 2’s have that cutout under the trigger guard and grip module? The ones I’m seeing for sale don’t seem to
behing disabled I can only fire with my left hand so my question is? can you reverse the mag release and is the holster right hand only
What holsters are compatible with it
When it comes to the slide, is it similar to the XD? I’ve been using mine for a year and the slide is still a bit tough.
Gen 3 is released. No manual safety (Thank God) Threaded Barrel and an optic cut slide.
Great review. I don't normally do a request. But you do a ton of Turkish guns. As such girsan is coming out witb a p35, aka a a browning high power clone. Would love it if you could do that since I'm a poor.
We've seen those and were first to cover the earlier Turkish clone which I believe was a Tisas first imported by LKCI, then Brownell's. I'm not sure who is bringing it in now.
Dear do you expect $1500 priced gun features in $300 gun ?
Some of the Safariland holsters have this kind of retention.
" so you don't get Glock knuckles"
😂 Lol is the truth 👍
I had a hard spot on my finger after years of heavy Glock use
Those look a lot like the Canik mags. Do they interchange?
This is only speculation on my part, but I do wonder if a full-sized XD(M) slide in 9mm (4.5, 5.25, or even the 3.8), *or* an XD Mod 2 Service 4" slide would actually fit on this gun?
An original XD 9 Defender/Service Model slide will not fit, but this gun seems to be a mix of original XD and XD(M) styling, and an XD(M) full sized slide will fit on a full-sized XD Mod 2 frame (and vice versa).
It still might not necessarily fit, but if anyone has access to a full-sized XD(M) slide or even an XD Mod 2 4" Service slide, it might be worth a try.
Hello
you have idea the XD mode 2 4” Iwb kydex holster can fit in Zigana px9 ?
@@rizwanveera3009 Hello sir, I am not 100% positive, but I would be very surprised if the Zigana PX9 *did not* fit in a kydex holster for the XD Mod 2 4" pistol.
I can tell you that an XD 4", an XD 4" Mod 2, and an XDM 4.5" pistol will all fit within a BlackHawk Serpa holster for the XD 4" Service Model. All of the pistols are overall very similar, although the trigger guard on the Mod 2 is rounded, unlike the original XD and XDM where it is squared.
I would have to have the Zigana and the specific holster in front of me to know with 100% certainty, but I would be pretty shocked if the Zigana did not fit in your kydex holster for the XD Mod 2 4". I think another channel SnakeDoc checked the XD 4" for fit in the Zigana holster and it did fit (or maybe it was the other way around, and it fit).
I gave a px9 gen 1 I was wondering what extended magazine can I use for it
Are any of the parts, say the magazine compatible with the XD series?
I bought this gun but unfortunately, the trigger won't click at all. I didn't load the gun as I thought I do a full cleaning before loading. As the trigger won't click I cannot dismantle the gun. Any suggestions?
Can you rack the slide?
@@anthonyyoung6433 Yes... but as the trigger won't click I cannot remove the slide. SDS Imports are pretty bad when it comes to customer support.
If you had pick just one Turkish handgun have test over any of other strike fire handguns would you pick Tisas over thing else??? I enjoy review special how this gun perform in testing.
The Gen 3 is significantly better over the Gen 2. Canik makes great guns too. Having shot hundreds of pistols and trained with a dozen or so it ultimately comes down to the shooter, not the gun. I've seen "garbage" guns perform great and "fancy/ultimates" do poorly depending on the skill of the shooter.
@@GBGuns Your gone find funny after review all Turkish strike fire handguns that out there. I went bought Sar 2000 clone cz75 because it was all stainless steel magazines are cheap easy get and as you know because test one very reliable with all kind ammo. For my needs fit my firearms collection. Thanks for advice keep on doing great reviews.
@@richardlinares4616 we've reviewed the 2000, years ago. Nice gun
Never seen that one
Yes you have it’s the gen 2 of the Px-9
Hello
Does any buddy idea the XD mode 2 4” Iwb kydex holster can fit in Zigana px9 ?
Where did you get the magwell from?
It was included with the gun
Which stores available this model
Palmetto state has 2 different versions on sale right now for $249 with free shipping
Can anyone give me a list of gun mags that will work for this px9
Does that have a steel guide rod ??
manual is under that foam thing.
Does the xd 50 round mag fit in it?
First time ever seeing this weapon, and you are correct Sir! I didn't know it before this video, that the Springfield XD Line of pistols had "Clones". It is undeniable now though! This weapon looks almost exactly like my Springfield XD-45, and my Springfield XD-9 4.0 Mod.2. The one that DOES NOT have the words "Grip Zone" printed on each side of the pistol grip! I'm sure it's a nice weapon as well, but I could NEVER Own a pistol with anything like that printed on it! I apologize Springfield, but Y'all F'd Up when you gave that design the "Green Light" for Manufacture! Those 2 little words kept me and many, many others from purchasing that pistol! I mean Honestly, what in the Hell were you all thinking to let a single 1 of those pistols to leave your facility? You should have known that shooters would not allow that to be printed on their weapons!
How old is the barrel of this gun..sar x9 is 30000 round? !
I don't think it matters, jus tlike rifles if you can afford the ammo to shoot-out a barrel you can afford to replace the barrel.
Just curious... Assuming an owner shoots 15-20-30,000 rounds and wants replacement springs after (10) years do they support older guns ?
You'll have to ask again in ten years! Of course if someone can afford that much ammo they can likely afford to replace the gun.
Might be interested if they come with an optic ready version or if there is a red dot mount via rear sight. Do you know if the rear sight is same as any of the popular models? Black on Black sights wont work for me..
funny thing is I noticed the G1 comes with a glow-in-the-dark front sight already installed!
I read that the Gen 3 is coming out with the RMR slide for the optic option and also they’re removing the thumb safety (Bummer) cause I like the safety switch.
Yes, we have an article about it and full review on GBGunsDepot.com
Original Springfield XD? You mean original HS Produkt HS2000?
Yes
I own many other cheap guns and many more expensive guns, m&ps, xds etc. I choose to carry this one everyday. You just can't get near the options for the price anywhere else. Even adaptable for red dot sights and fits any xd holster and p226 mags. I carry appendix and it's very accurate and exactly what every carry gun should be. The best hands down, regardless of the cheaper price tag. Edit added: get the military Philippines version... not this gen 2 🙄
The Gen 3 is light-years ahead of the Gen 2
I have to know, why do you use nosler ammo to check chamber support? You keep saying they're the most consistent but I'm assuming you mean during firing not the size of the round cause last I checked every 9mm fmj is the exact same dimensions. So why use the nosler to check the support
Because I can trust Nosler to be loaded properly. No swell or bulges on the brass, and a good overall length.
@@GBGuns okay I get you and don't get me wrong I wasn't trying to be critical or nothing like that I actually love your videos it's because of your videos that I own several guns that I now possess such as the Regard MC. I enjoy how your videos are short sweet to the point and show everything that's needed such as takedown the internals if you wouldn't mind maybe go a little slower over the internals that way people can see like the rail sections stuff like that but other than that great videos Man was just curious about the nosler ammo
@@Ironhand187 no worries! Thanks for asking!
🎉🎉🎉🎉🎉👍💫👍
So I have a a Gen 2 OD green PX9 and for some reason I am running into issues with the trigger. I literally have to squeeze the out of the thing to get it fire but sometimes it will fire ok. I have a black Gen 2 that fires perfectly. Any thoughts? I took it to a gun smith and he said there is no malfunction but something ain't right.
Our Gen 2's trigger started acting up too. Best to contact the importer
@@GBGuns ok cool. I sent sdsimports an email explaining the issue. My black gen2 works flawlessly and the trigger mechanism looks berger then the gen2 green one I have. Hopefully they can help me out. Have you had any luck?
We havent reached out about our Gen 2 yet, the Gen 3 is awesome so far.
@@GBGuns I've been eyeballing the gen 3. Is it worth the purchase? If I hear something I will let you know.
We've reviewed the Gen 3, it's truly on another level than the Gen 2
Turkish Croatian gun
The rear rails are polymer. I have the gen 1 model and it run well and seems accurate to me, but the safety is a pain In the butt.
The G1 safety I have works fine. It's a great gun for a great price.
Tisaş Zigana px-9 gen 2
Glock killer ?😈😜😋😁
Glock has been dead. Still a good gun, just way behind on ergonomics and features
Why do you keep saying TH-cam won’t allow you to do things with the gun when everyone else do???
It's in TH-cam's list of restrictions. Some get away with it for a while, but will likely be demonetized or shutdown. It's TH-cam's house so we play by their rules
@@GBGuns I gotcha and I fully understand I enjoy the way you view products keep up the good work
I don't look like this gun got it at Vance's Columbus Ohio iam a older person recoil sensitive the rack is hard to rack it's hard to load i traded it
Does anyone know where to pick one of these up
I got mine off of Classic Firearms.
We've got a link in the article for one listing. We found ours at Gun Zone
Funny enough, I bought mine at the range I was practicing at and it was better than the other guns they sold when I took my LTC class. NAILED IT with the G1 of this gun!
Palmetto state. 2 different generations on sale for $249 with free shipping
The snowflakes of TH-cam
Shit I gave 405 for mine and theres videos on here showing how to install auto sears and shit that's about as modifying as ya can get
Nice Video! Very thorough, easily understandable, good Descriptions. A Subscriber, You have Earned Sir!
Thanks for the good content!
#AmericaFirst
#YayYayUSA
#2ndAmendment👍
#ComeGetEm
Welcome to the channel!
🙄 at TH-cam
Cheapest looking/sounding gun I've ever seen. It's like a toy.
I bought it and i agree .. its shit trust me
Damn, I thought flocks were ugly.
What inexpensive light would best fit this pistol?
This makes me sad. I have to say, it's a sad day when you have to explain all of that stupid stuff to TH-cam before they will allow this video. I've been around weapons all my life. I know that pointing a muzzle in the direction of your face is something you want to stay away from. But also it's something that has to be done at times. Make sure the weapon is clear, just like you did before doing so.
Hello:::Buds Guns $209.95
Safariland has the GSL holsters that work the same way. I own one and I love it. It’s also universal.