Furitek FX118 Gets Brass and it’s AWESOME

Furitek NAILED IT!!!! ITS AWESOME!!! See it here furitek.com/co...
Amain Hobbies bit.ly/2RsdBVl
Flysky GT5
Amazon amzn.to/3z5VAOV
Radiolink RC8x
Amazon amzn.to/3OvEbqe
If you would like support Exocaged RC Directly, consider being a channel member. Cheap monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. Take a look! / @exocagedrc
Zzzyyytttppplll

[@gibsonlife573]

Obviously you know what you're doing but I would definitely change tires I would go with Jake concept RC four-wheel drive scramblers are really good I think they would all fit really good and looks scale I heard they have OverDrive years on the way

[@sambushee9296]

Injora makes an excellent set of brass rims, I put a set on my scx 24 comp build, with injora tires, there killing it in small market. Just need inserts to round everything out.

[@trailhunterhochschiebenrun3684]

I but the rcawd Alu CR-18 axles on my FX118. The good thing on the rcawd axles is, that they came with Brass part for the portal, brass counterweigths and full bearings. I also put heavier rims on. Overall the Fx118 weights now around 600g or 21,1oz. Gives you a tons of weight down low, looks beautiful and works Fine.

[@AnyAssumptionBanter]

I'd consider what tires and rims it needs. With furitek, rotational mass shouldn't be too much of an issue except for the servo and steering rods. The other issue is that it rides pretty high for the lines you're running. Lastly, its looking at those links and its geometry. The basis for that rig, the harvester, didn't exactly have quality parts nor designed as a lcg rig; well, none of these rtr's are designed that way as they are scale rigs best for small rocks and trails, not comp rigs.

[@austinrupard9073]

I put some heavy wheels on my kids fx118 and it torque twists like crazy did yours do it too?

[@frankiemabry1726]

wheels and tires an brass rings up front and high clearance links. I heard there coming out with over drive gears idk when though.

[@NelaRc]

Tires I got from injora, Globact rims and rings work sweet

[@betagalaxy13]

Hi, what type of weights do you use on injora wheels?

[@redndeyes]

Cream of the crop pick of the litter 😂

[@IlhanCanGuven]

Are those brass hexes extend the width or same as stock?

[@vbspeed7571]

Rims next 😊🤘

[@AgeOrmstad]

Hehe 😂sweet man 🤙

[@darrinwoodward14]

I put brass rims on mine,and just got the high clearance metal links,metal steering links,metal driveshafts and the slider skids.putting my electronics on the skids,and moving my battery up front for a 60 front 40 rear weight bias.also added full bearings.

[@mikerainey3847]

Joe, if ya' get a chance put the cedar motor in that little guy you won't be disappointed!

[@3sbrc]

Nice! Thanks for the showing of grams too!

[@RC-Closer1313]

You make it look so darn easy bro😳… especially one handed!

[@enixstaysfuk]

Joe get the 64x24 Injora Rock Terrain tires (also their comp pins at 65x19 are very good) in the S5 compound whoa boy, heavy brass negative offset wheels to get ya slightly wider and planted (or you can get RC4WD stamped wagon wheels and just flip the hex to get a heavy offset and run brass rings in the front and delrin or something light in the rears to keep it lightish) that and Flub RC Slymeballz V5.1 inserts (v5 for comp pins) 🤌 that combo is killer 🤙🤙🤙there's always Little Guy Racing Parts too 😅