ฝัง
- เผยแพร่เมื่อ 28 ก.พ. 2019
- A quick look at the TL866II plus universal eeprom programmer.
Sorry for video quality during software use, I don't know what went wrong there.
Tools I use -
Soldering
Quick 861DW hot air station
Duratech TS-1640 solder iron
Multimeter
RMM760D - can be found under many name badges
Microscope
Luzky Zoom 3.5 - 90x simul-focus single boom stand trinocular stereo microscope
Camera - Lucky Zoom HD 14MP
Oscilloscopes
Siglent SDS 1102CML 100MHz 2CH
Philips PM 3305 35MHz 2CH
Bench supply
Powertech MP-3086 0-30V 3A
TL866II PLUS universal EEPROM programmer
I ordered one a month ago off eBay from a reseller in Kentucky. The unit came with a green 3M socket (a good one!) and works with no issues! Excellent video!
Just noticed on both the Xgecu and Autoelectric websites - pictures of the TL866II plus with black and green sockets.
Thank you, glad you enjoyed it. Hope it serves you well!
@@JonnyFix It has so far. I also have a Willem to program 21 & 25 volt EPROMS.
Heh.. nice one Jonny - I recently got myself the very similar RT809H programmer myself. It's really good fun being able to lift all the flash and eeprom chips of boards and tweak the contents. Cheers!!
i know Im asking randomly but does anybody know of a trick to log back into an instagram account?
I was dumb lost my account password. I appreciate any help you can give me.
@Brock Victor i really appreciate your reply. I found the site thru google and I'm trying it out now.
Looks like it's gonna take quite some time so I will reply here later when my account password hopefully is recovered.
@Brock Victor it worked and I actually got access to my account again. Im so happy:D
Thanks so much you saved my ass!
@Jedidiah Eddie Happy to help :D
What a great tool, no eeprom is safe now ha ha :-D
Happy zapping :-D
If i was you i would look around for a suitable case for it, perhaps an old electric drill storage case or similar.
Years ago i bought a willem eprom/eeprom/pic/i2c programmer, it was the old parallel port connection.
I saved quite a few mobo's by reflashing the bios, good for general eproms up to 25 volts.
Every memory i had was tested, well i had to lol :-D
The shame is modern personal computers have lost there parallel ports, so it's dead :-(
Any usb adaptor has to be a real parallel port, not a printer only bodge up.
Thanks for the video might help me decide between Carprog, KESS, VVDI, and this one
Great explanation thanks again
Get a Kess (V2) and a KTAG, both are great for programming ecu and bcm. Like the tl866ii, avoid clone units and buy MASTER units not slaves. Also, spend the money on the optional rig to hold the modules and the spring-pin adapter plates. They save a ton of time setting up and tearing down while programming.
Jonny nice video am going to tell you why am going to subscribe to your channel
1. You got a Maxisys, I got the Maxisys 906ts also
2. You got TL866II plus, I got TL866II plus
3. Most importantly you got a good sense of humor, and I know will learn a lot from you......lol
A great piece of equipment. Can you do a video on how you use the all the different type of adapter with the device. I'd love to see that. Thank for the review.
I will hopefully have a real world practical use scenario video soon, just waiting on parts to arrive.
Answering your question in the video... If you program without erasing, everything that was a '0' will stay a '0' and all the places where you had a '1' and need a '0' will become '0'. However, every bit that was already '0' and need to be '1' will stay '0'. Writing flash can turn 1s into 0s, but can't turn 0s into 1s. "Erasing" is really the process of turning every bit into a '1'.
It's been so long I don't even remember positing the question but I think I did know that and it makes perfect sense. Thank you!
I’ve been thinking about getting one of those for MacBook repair, sometimes you need to reflash the spi rom.
Get one anyway, even if you never flash a mac I'm sure you'll use it for other stuff. I just read out a NAND flash from a dead fish finder. Now I have to mount it somehow and download the owners favorite fishing spots he's been dying to get back!
I have the TL-866CS & RT-809F , I enjoy the RT-809F more, There is a newer model RT-809HI have used both on mac and laptops , I am also look at the Svod programmer or the SAS IO Programmer
@@AnonymousRepair Hi, just wondering is I start a ecommerce selling Bios chip and flash room services would be a good idea, just for passive incomes?
If there is a market for it go for it , The newer laptop are more tricky
Thank you.
i couldnt find any info online, does this programmer have support for 95xxx chips? 95040 specifically?
It can do the ST MP95040 range and ROHM BR95040 according to the list in the software. If you download the software it will run in demo mode without the programmer attached so you can see what devices can be chosen :)
@@JonnyFix thank you sir!
I have a M27C1024 - 64K x 16 EPROM in a PLCC44 package and used the PLCC44 to DIP40 converter on the apparently official XGecu TL866ii Plus.
I just can't read it as it most pins show no pins detected. My chip is working fine in on the board it came from.
I emailed XGecu's technical support line but no response.
Any ideas what the reason could be for the no read ?
Is this chip on their official supported list? You can find it on XGecu's webpage.
Good night friend I have a recorder like this and I can't record the eprom.
ST
M2732A-2F1
21V Fast
Would you have any tips to give me, how to do it?
If it only records slow there's probably no workaround
I tried to read the winbond chip while still soldered on board & a error message keep pop up saying the programmer found short circuit & the protection kick in , it is not wise to try with chip while still on board , I tried with IC removed & it is working fine
This sounds accurate
Could be that mine is either a clone or I didn't get the full package option; I didn't get even 1/3 of the socket adapters that you got.
If you look on Amazon, they are sold by dozens of companies from around $60 to $150. The biggest difference is the number of adaptors/sockets you get with them.
Hi there I'm ordering this device without a CD and I need your help on downloading the software if you could please
Go to www.xgecu.com to download the software. There are links about half way down the page. It mostly in Chinese and the download page is almost totally in Chinese but the links are easy to make out. I just ordered one of these units - it came with a green 3M socket - and it works like a champ! I have another programmer - a Willem that operates through the parallel port - that works as well. I wish this one would do the Xicor X2212D chips. Then I could backup a lot more ham radio data!
Where did you download drive and software from?
google
Do you have the link to the seller?
I am pretty sure this was the seller but it was so long ago ebay has deleted my previous purchases from the list. I just remember the part where they explain they're an authorized distributor. www.ebay.com/usr/sunwenjun?_trksid=p2047675.l2559
Can I mod xbox 360 with it? Can it read nand flash?
It can read and write NAND yes. Please watch my video on the Maxisys scan tool repair.
@@JonnyFix Sorry to disturb you again, Can you please tell me the procedure to mod xbox 360 with coolrunner chip attached to a pic programmer or with tl866 programmer. I don't have TL866 plus version.
@@saju3791 I do not know how to mod consoles, sorry.
Hello dear friend does it for chips cars
If the chip is on the supported list yes
Guys, it would be a good idea sell flash room service over ebay and my own website? I have a few dumps and bios , just for passive incomes.
Do it, nothing to lose. People already do it for laptop controllers.
.. I get tired of buying China. I wanted the ar32 unit.. but they sit and charge between 50 and 300 for every one of those adaptors. The main unit being 500. The quality would be better. But in use, not enough to justify. I don't know why im sharing.. just wonder if anyone else has this same frustration, wanting to buy from your country... but being unreasonable.
Thx for video
Don't upgrade to ver 9.
Did it brick your one
The company does not support its previous products. They will orphan you in a heartbeat just to sell you another burner. I bought the TL866CS and was orphaned four months later when they dropped all support for it, including dropping it from later revisions of their programming software. So I'm stuck at revision 6.85 forever. Thanks for nothing.
因为有不少是盗版货，TL866CS通过软件即可升级为TL866A。