Installation - Chevelle Bucket Seat Part 2 - Backrest
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- We had to break this into two videos, as this assembly is a good bit more involved than the GM F-bodies. We hope you'll watch both and get some good points. As always, call us at 800-342-0610 or visit us at www.puiinteriors.com to locate your nearest authorized retailer or just to ask a question!
David,
Vinyl/burlap isn't necessary for the backrest. The purpose of the added layer of material is to help spread the force/weight of a person out over the springs to help prevent foam break-down under that weight. Just like trying to lift a piece of furniture with a sharp ledge, it's easier on your hands to cover that ledge to spread out the force. Adding it certainly won't hurt if you want to add it.
hi, So you do not use vinyl to cover the springs as you did for the bottom half?