Checklist of Brick work | Site Engineer Duty during Masonry वक्त ये 10 बाते ध्यान रखे ?

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ต.ค. 2024

ความคิดเห็น • 97

  • @pradeepkumardas895
    @pradeepkumardas895 3 ปีที่แล้ว +9

    Best Channel For Civil Site Engineers

  • @hariYadav-ul5qo
    @hariYadav-ul5qo 3 ปีที่แล้ว

    सर और सारी बातें को लेकर विडियो बनाओ आप की जानकारी बहुत अच्छी लगी

  • @भारतीयनागरिक-ष6ल
    @भारतीयनागरिक-ष6ल 3 ปีที่แล้ว +1

    Great information👍👍👍
    Zishan BARC Mumbai

  • @jogindersingh9491
    @jogindersingh9491 2 หลายเดือนก่อน

    Pls describe about Brick masonry bond , which buildup

  • @maheshmbandel4203
    @maheshmbandel4203 2 ปีที่แล้ว +1

    Thanks a lot for this video. My contractor had built walls without the concrete beam in the middle. Have asked him to rectify it now.

    • @worksystematically
      @worksystematically 2 ปีที่แล้ว +3

      Sir itna koi issue nhi apne brick work krate time agar 6mm ya 8mm ka steel bhi provide kraya hoga 24" to 30" k baad tab bhi problem nhi h

    • @ayanshkumar7999
      @ayanshkumar7999 2 ปีที่แล้ว +2

      If your contractor has given Lintal beam above door and window, it will enough to resist load and prevent crack.
      Don't worry much.

  • @craftswithIRU
    @craftswithIRU 2 ปีที่แล้ว +3

    As per my knowledge at joints between colum and brick we use chicken mesh are we provide groove to prevent from surface cracking

    • @badarbiyabani
      @badarbiyabani 2 ปีที่แล้ว

      Groove is provided for identifying column and wall; also if any cracks appears gets hidden.

  • @NazimKhan-fb8ni
    @NazimKhan-fb8ni 3 ปีที่แล้ว +2

    Sir ji brick frog (dibbi). Must up honi chaiya. Bond main benefit hota hai.

  • @sureshmehta9572
    @sureshmehta9572 2 ปีที่แล้ว

    Brick work me dr.fixet lw plus use kreki nhi

  • @FarmanKhan-fi8wj
    @FarmanKhan-fi8wj 2 ปีที่แล้ว

    Mashaulllah z10 but plzz Tora easy tariqa batao kindly

  • @hikikomorihachiman7491
    @hikikomorihachiman7491 ปีที่แล้ว +1

    Sir, is there a necessity to check the horizontal level of each layers of the brick with dori or spirit level?
    My Mistiri was making some of the layers 5 to 10 degree from horizontal base and I couldn’t give him the reason not to do it except it being non-aesthetic which could easily be covered up by plaster.

  • @bollywoodnews1237
    @bollywoodnews1237 3 ปีที่แล้ว +2

    Plastering vs pointing ???

  • @raliyaesmaelhaji7167
    @raliyaesmaelhaji7167 2 ปีที่แล้ว

    Aaro kese bantahe

  • @modassariqbal306
    @modassariqbal306 3 ปีที่แล้ว +1

    Column making p 1 video banaye sir k site p column ki size agar 230 by 680 ka column hai to column shuttering making kaise kr wate hai site p sir

  • @ahconcretetile-dc8xp
    @ahconcretetile-dc8xp ปีที่แล้ว

    Nice video sharing my friend my full support to you👍👍👍👍

  • @chanderpaswan1305
    @chanderpaswan1305 2 ปีที่แล้ว

    sir building ki diwar 4 inchi wali 11 ft tak khadi ho gayi h but lenter ni daala h humne 25 din se some financial problems to sir diwar kamjor ho jayegi kiya.

  • @tauseefali1298
    @tauseefali1298 3 ปีที่แล้ว +1

    Very helpful thanks sir 👍

  • @gauravsutar4443
    @gauravsutar4443 3 ปีที่แล้ว +1

    Sir ji bahut badhiya 🙏👍

  • @jaimitsoni6197
    @jaimitsoni6197 3 ปีที่แล้ว

    Thanks for live training videos

  • @krishankumarsharma8384
    @krishankumarsharma8384 3 ปีที่แล้ว +1

    VERY GOOD SIR JI

  • @UmerFarooq-km7ee
    @UmerFarooq-km7ee 3 ปีที่แล้ว +4

    Sir please show how to use plumb Bob correctly for the walls...

  • @Hanumantdandwate.
    @Hanumantdandwate. 2 ปีที่แล้ว

    Sir morter failane ke Teknik sanga

  • @swastikrooj2803
    @swastikrooj2803 3 ปีที่แล้ว

    Flemish bond ka strength kam hota hai English bond ke comparision main.toh karon kya hai Flemish bond ka use karna...

  • @Dipak07-777
    @Dipak07-777 3 ปีที่แล้ว +3

    Dear sir, kindly make new watts app group. Existing all groups are full.

  • @sartajali1984
    @sartajali1984 2 ปีที่แล้ว

    Sir winter me quring kitne time karni hoti h

  • @finishingworkconstruction8426
    @finishingworkconstruction8426 3 ปีที่แล้ว

    Pls sir discuss about murga jali

  • @ashwanibhatcivil
    @ashwanibhatcivil 3 ปีที่แล้ว +3

    Bhai complete Measurement of BBS slab , beam , column & footing with drawings pe video laao ...live site 🙏

  • @azeemmirza9855
    @azeemmirza9855 2 ปีที่แล้ว +1

    Why this band between walls is required?

  • @29-deepukumar62
    @29-deepukumar62 ปีที่แล้ว

    Brick work ke kitne ghante bad curing start kr skte h pls reply

  • @eranilkumaryadav7045
    @eranilkumaryadav7045 3 ปีที่แล้ว +1

    Jay shree ram sir great video from Nepal

  • @gurmeetkumar6246
    @gurmeetkumar6246 3 ปีที่แล้ว +1

    Thanks sir 10mm th. Motar ksa pata chala ga koi mould hota ha kya

  • @ashwanibhatcivil
    @ashwanibhatcivil 3 ปีที่แล้ว +1

    New topic ....Great 👍

  • @deependrakumar5376
    @deependrakumar5376 3 ปีที่แล้ว +2

    Plinth ke niche wall me hole kyo chhorte hai soil bharte samay

    • @KaranSingh-uh6vq
      @KaranSingh-uh6vq ปีที่แล้ว

      Stand bnane k lye fir upr ka brick work krnge

  • @manjurmustafa9824
    @manjurmustafa9824 3 ปีที่แล้ว

    Thanks for giving detail information

  • @niteshjadhav2699
    @niteshjadhav2699 3 ปีที่แล้ว

    Very nice sir video

  • @Aninndu
    @Aninndu 3 ปีที่แล้ว +2

    आपका जब भी वीडियो देखता हूं तो कुछ नया सीखने को मिलता है सर 🙏🙏🙏🙏
    Thank you so much sir, ❤️❤️❤️❤️❤️❤️

  • @Vivek_Chaudhary99
    @Vivek_Chaudhary99 ปีที่แล้ว

    Bhai 3 din hi to Dena hai Pani ya jyada

  • @eraftabshaikh9255
    @eraftabshaikh9255 3 ปีที่แล้ว +1

    Sir WhatsApp group full for excel sheet, how to join the group

  • @sarthakmohapatra3738
    @sarthakmohapatra3738 3 ปีที่แล้ว +1

    Thnx sir

  • @digital.marketing420
    @digital.marketing420 2 ปีที่แล้ว +1

    In RCC building, does brick need to take any load of the building.

    • @badarbiyabani
      @badarbiyabani 2 ปีที่แล้ว

      Bricks don't take any loads instead rcc beams and columns bear weight of bricks

    • @badarbiyabani
      @badarbiyabani 2 ปีที่แล้ว

      Rcc beams are designed to bear brick wall loads

  • @Akallpaint
    @Akallpaint ปีที่แล้ว

    Nice video sir ji

  • @nobel12321
    @nobel12321 3 ปีที่แล้ว

    Sir itp formats download link kaha h me bahut preshan ho gya hu sir muje nhi mil raha h aap ki site pe plzzz provide krva do plzzzz 🙏🙏🙏🙏🙏🙏🙏🙏🙏

  • @nakulakoushalya6976
    @nakulakoushalya6976 3 ปีที่แล้ว

    Sir my Calum me jali kese karenge

  • @jasvirkumar5817
    @jasvirkumar5817 3 ปีที่แล้ว +1

    what about joint filling.

  • @pradyotsaha2579
    @pradyotsaha2579 3 ปีที่แล้ว

    Kya ground beam Dene ke bad plinth beam jarrori hein.Agar house ka base level height mein ho Please reply

    • @ayanshkumar7999
      @ayanshkumar7999 2 ปีที่แล้ว

      Plinth beam alone is sufficient for making strong bond but if soil condition is not good then you may put both of these.

  • @civilengineer5584
    @civilengineer5584 3 ปีที่แล้ว

    Sir plumb bob use both side of wall

  • @pravin9087
    @pravin9087 3 ปีที่แล้ว

    Majbut konsa bond hai.

  • @chandermohansingh11
    @chandermohansingh11 3 ปีที่แล้ว

    bro this mason is not putting any cement in between bricks, he is just putting cement mixture over the bricks(after placing them) whether they are placed header or stretcher way...plz note...thanks

  • @jagdishgoswami5468
    @jagdishgoswami5468 3 ปีที่แล้ว +4

    Knowledge is Power ❤️🙏

    • @haroldnickolas4638
      @haroldnickolas4638 3 ปีที่แล้ว

      Sorry to be so off topic but does someone know of a way to log back into an Instagram account..?
      I was stupid lost the account password. I would love any help you can offer me!

    • @josiahkairo5916
      @josiahkairo5916 3 ปีที่แล้ว

      @Harold Nickolas instablaster :)

    • @haroldnickolas4638
      @haroldnickolas4638 3 ปีที่แล้ว

      @Josiah Kairo i really appreciate your reply. I got to the site on google and Im trying it out atm.
      Seems to take quite some time so I will reply here later with my results.

    • @haroldnickolas4638
      @haroldnickolas4638 3 ปีที่แล้ว

      @Josiah Kairo it did the trick and I actually got access to my account again. I'm so happy!
      Thanks so much, you saved my ass :D

    • @josiahkairo5916
      @josiahkairo5916 3 ปีที่แล้ว

      @Harold Nickolas happy to help =)

  • @sadikali1986
    @sadikali1986 3 ปีที่แล้ว

    Good

  • @zunaidaazam4516
    @zunaidaazam4516 3 ปีที่แล้ว +1

    Thank you sir..

  • @harshitsagar9613
    @harshitsagar9613 2 ปีที่แล้ว

    Flemish bond

  • @Kiran-h5c8c
    @Kiran-h5c8c ปีที่แล้ว

    Ek din mein 4" brick wall kitna kar sakte hai sir

  • @sachinthapa5576
    @sachinthapa5576 3 ปีที่แล้ว

    Bro opc or ppc cement plse reply

    • @ayanshkumar7999
      @ayanshkumar7999 2 ปีที่แล้ว

      opc is generally used when we need early strength like in breeze construction and government plans. It has quick adhersive properties. In general we may use it in column, beam, slab costing. Opc is little costly than ppc.
      Whereas ppc is most oftenly used in general construction like plastering, brick work, flooring. It is less resistance of cracks but has offer nice workability.
      Opc cement is made with 75% cement clinker , 25% Gypsum.
      ppc cement is made of 75% cement Clinker 5% gypsum and 20% of fly ash.

  • @mamaurya2271
    @mamaurya2271 3 ปีที่แล้ว

    Sirplinth beam casting ,after how many days brick work start...

    • @ayanshkumar7999
      @ayanshkumar7999 2 ปีที่แล้ว

      After 24 hours you can do it. But best you do it after 48 hours.

  • @bikashranjansethi6811
    @bikashranjansethi6811 3 ปีที่แล้ว

    The 9 inch wall you are saying is including plaster thickness..?? @civil_site_visit

  • @seeker4430
    @seeker4430 3 ปีที่แล้ว

    Concrete block mein aur iske kaam mein kya farak hai

  • @jasvirkumar5817
    @jasvirkumar5817 3 ปีที่แล้ว

    maximum Masons do not fill the joint properly

  • @jasvirkumar5817
    @jasvirkumar5817 3 ปีที่แล้ว

    Joint filling is main part of brick work. You haven't talk about it.

  • @azharshaikh5796
    @azharshaikh5796 2 ปีที่แล้ว

    Ok

  • @_Ankitdiaries
    @_Ankitdiaries 2 ปีที่แล้ว

    Sir i have one query regarding brick masonary ....can we do brick masonary of 9 inch in 1st and 2nd floor while in ground floor brick masonary is done of 4 inch
    plz answer sir....

    • @badarbiyabani
      @badarbiyabani 2 ปีที่แล้ว

      If you're having rcc beams you can continue 9 inch only in exterior walls and 4 inches in interior walls

    • @badarbiyabani
      @badarbiyabani 2 ปีที่แล้ว

      Do you have rcc designed plan?

    • @ayanshkumar7999
      @ayanshkumar7999 2 ปีที่แล้ว

      Provide inverted beam on 1st floor wherever you want to put 9" inches brick masonary wall. It make easy with great strength in above floor.
      This applicable in frame structure
      .

  • @pradeepkumardas895
    @pradeepkumardas895 3 ปีที่แล้ว

    Perfect

  • @be-honestindian3054
    @be-honestindian3054 3 ปีที่แล้ว +1

    Are sir ye bas formalities hai..

  • @krishnamaravi752
    @krishnamaravi752 3 ปีที่แล้ว

    Which type of sand is suitable for lantter work

    • @ayanshkumar7999
      @ayanshkumar7999 2 ปีที่แล้ว

      Mixing of both white and brown sand for economical type.
      Brown is best option for preventing cracks and give strong adheresiveness.

  • @akashshelke5213
    @akashshelke5213 ปีที่แล้ว

    Kya aap Marathi ho🤔🤔

  • @shubhammalik8211
    @shubhammalik8211 3 ปีที่แล้ว

    Sir at the time of flooring like tiling, lobby stone from where we take level for every floor

    • @shubhammalik8211
      @shubhammalik8211 3 ปีที่แล้ว

      Ya Koi reference level mark provide krte h at every floor or kha mark krte h

    • @AMITPANWAR1000
      @AMITPANWAR1000 2 ปีที่แล้ว

      Yes mostly column pe lvl mark kiya jata h pir use refrence mankar floor lvl ready kiya jata h

  • @INCREDIBLEINDIABYDIVYA
    @INCREDIBLEINDIABYDIVYA 9 หลายเดือนก่อน

    But ladkiyo ko is industry me bahut dikkat hai ..koi bhi as a site engineer girls ko rakhna nahi chahta 😢