I think anything that 22 and newer is not made of the same quality. Trucks, tools, 4 wheelers and all. I’m really glad I got a 21 at the last minute. You pointed out air box difference and I can’t stand the racks. I wanna know what else they went cheap on that we can’t see
Use pool / jacuzzi plumbing. And irrigation hose and bibs. All screws together watertight and anything you can possibly think of . Btw. Cant u just run your vent lines to the airbox itself? Its clean you can take it apart and its same as having them all at top of snorkel.
Don't really understand the idea of making more holes in your airbox but if it's what you prefer. I do like that you use PVC and you tried to get it up as high as possible, I had to trim my center plastic to clear the pipe.
4ft of hose coiled above the box (Ajax mod) and zip tied nicely away from the exhaust and secured from rubbing. Saved my rubicon on a couple of sinks where water never made it through the coil. More than one way to skin a cat, but drilling another hole has never crossed my mind just to feed said hose into the potential water filled area, just my .02
I used a 2 inch fernco cap with clamp on air bladder with black rvt sealer works great ran gator loop at hollowpaw this past Saturday no water at all in air box she sealed good
I need help mud puppy. I replaced the clutches in a Honda rancher 420 and the top end. Just finished putting the snorkel and all of it back together and when we crunk her up she ran buttery smooth but when we pressed the gas a little the foot shift slammed up and slammed down and now when we put her into her gear she won’t move but we hear it going into gear. It just want move. Any thoughts
These new 520 motors do not like sand I put a 60 reduction boss in and 30 terrachie on and motor has a bad rattle even did it with stock tires on in sand when new asked few other 520 owners they said same not sure why fuel injection does it my old carb hondas didn't do it any advice be nice all my stuff done hundred percent right makes it not fun riding on sandy trails
@@MudPuppyOffroad I used 1 1/2 pvc to snorkel mine on purpose, it fixed the lean condition and was easier to run to boot. I dont ride in much sand but my 520 rattled a bit riding in deep snow stock. You should try a smaller 1 1/2 snorkel, I swear my 520 runs better than stock now. My brother also has a 520 rubicon, he has a 2 inch snorkel, mine with the smaller snorkel runs better, these atv's are too lean.
Let's go Brandon!
FJB
Can’t wait to see the video of you testing it
Coming soon
I think anything that 22 and newer is not made of the same quality. Trucks, tools, 4 wheelers and all. I’m really glad I got a 21 at the last minute. You pointed out air box difference and I can’t stand the racks. I wanna know what else they went cheap on that we can’t see
I still got a 420 air box I ordered for my 2020 520 and I never used it. It was a good investment. Probably worth twice as much now
looks great man. really appreciate the good informative videos like this. want one of these bad, wish they were available....
Seeing all those sensors and computers makes me appreciate my old little tank That is geared deeply
2000 Suzuki king quad 300 4x4
Use pool / jacuzzi plumbing. And irrigation hose and bibs. All screws together watertight and anything you can possibly think of . Btw. Cant u just run your vent lines to the airbox itself? Its clean you can take it apart and its same
as having them all at top of snorkel.
Not a good idea as air box is pulling air so you could be pulling from from those lines you ran into it.
Homemade snorkel brace ? Wanting to brace it higher than at the rack. Any insight would help thank you boss
Don't really understand the idea of making more holes in your airbox but if it's what you prefer. I do like that you use PVC and you tried to get it up as high as possible, I had to trim my center plastic to clear the pipe.
I don't love the second hole either but it's the way to do it... That came out weird
4ft of hose coiled above the box (Ajax mod) and zip tied nicely away from the exhaust and secured from rubbing. Saved my rubicon on a couple of sinks where water never made it through the coil. More than one way to skin a cat, but drilling another hole has never crossed my mind just to feed said hose into the potential water filled area, just my .02
I had really good luck with the kit from warrior risers, super convenient, looks professional, and reasonable price.
I used a 2 inch fernco cap with clamp on air bladder with black rvt sealer works great ran gator loop at hollowpaw this past Saturday no water at all in air box she sealed good
Can I run 30 Aztecs on a sportsman 450 no gear reduction🤔
Hey I have a question how do you keep water out from your screen my lost neutral bc of it help please
I've always put gasket maker on my air box lid and it comes right off
Quick question, what size is the cap that you got for the water pump, and where do you get them from?
I really have no idea I just have a set of them from Amazon just a generic vacuum caps
Which Deoxit do you use?
D series, D series gold, s series?
Your not using dielectric grease on all the connections anymore? Honda must have really good connections
They do
Why not just run the vent line to the top of the snorkel I’m curious cause that’s what I did
What’s the spray you put on the connections? Thanks
Looking forward to it microsherping
can you make a v2 of the 5$ 2inch lift you did 6 years ago
I need help mud puppy. I replaced the clutches in a Honda rancher 420 and the top end. Just finished putting the snorkel and all of it back together and when we crunk her up she ran buttery smooth but when we pressed the gas a little the foot shift slammed up and slammed down and now when we put her into her gear she won’t move but we hear it going into gear. It just want move. Any thoughts
It’s fucked
I don’t need snorkel in Arizona . But I did so spacers on my channel
Solid and great advice.
How much would you charge to snorkel my 350 Honda rancher
what spray you used for the connections?
Nothing anymore thats a mess
How did you secure that blue hose to the engine
I put some ultra black on the inside of the hose and then secured with a hose clamp
These new 520 motors do not like sand I put a 60 reduction boss in and 30 terrachie on and motor has a bad rattle even did it with stock tires on in sand when new asked few other 520 owners they said same not sure why fuel injection does it my old carb hondas didn't do it any advice be nice all my stuff done hundred percent right makes it not fun riding on sandy trails
Yeah it's got a lean tune. I'm looking at tuners
@@MudPuppyOffroad
I used 1 1/2 pvc to snorkel mine on purpose, it fixed the lean condition and was easier to run to boot.
I dont ride in much sand but my 520 rattled a bit riding in deep snow stock.
You should try a smaller 1 1/2 snorkel, I swear my 520 runs better than stock now.
My brother also has a 520 rubicon, he has a 2 inch snorkel, mine with the smaller snorkel runs better, these atv's are too lean.
Would 30” aztexs rub on a 2022 Honda foreman sra with no lift?
Not with 5+2 offset. Minor trimming with other wheels
Do a rancher air box swap. Rancher doesn’t have the air bladder. One less joint to leak…
I do that when they are in stock which is not very often
I got quoted $1000 for a gear reduction for my 2021 rancher irs does that sound about right?
Pretty high
where did you buy the rims on that
Ebay they are junk
What did u do with the spark plug boot
Nothing
2-3 hr job to get the 4x4 connection apart i gave up
You probably didn't pull the frame tab off the connector first it can't come apart until you remove that little plastic tab
how long is that blue hose
3 ft
@@MudPuppyOffroad ok thank you
You going out to holopaw today?
Tomorrow
Snorkeling 101. Pay attention kids.
Man I’d love for you to waterproof my ruby. I’m in Florida and got cash😂
Any of you guys know if you need wheel offset to run 28s or can you run them on the stock rims
Stock is fine
@@MudPuppyOffroad thanks man
Love it
Love it bro
Do you think a 680 topend would work on a rubicon
Heck no completely different engine
@@MudPuppyOffroad oh ok. Thankyou I know you would be the guy to ask
Be careful using the term, "Common Sense" it seems to have become a super power these days. Was that Deoxit D5?
Yes
Nice bike
Wish you would let me pay you to make my rubi a boat, these river ranch trial and errors killing me
Lets say i did glue my lid on how tf i get it off 😂
Buy a new airbox
I love atv bike
I’m paying $1200 for rad kit snorkel and O2 delete and I promise you they ain’t doing it like this
Ur getting ripped off
Robbery
Dang you really stupid to pay 1200$ and this is better than those kits