Really nice job in listing all of the parts and tools. I hope that you get sponsorship. You have a good channel! I am glad to see that you went to a road that was empty and waited for the road to clear before you did your test; well done!
I know Im asking randomly but does any of you know of a way to log back into an instagram account? I stupidly lost my login password. I appreciate any help you can offer me!
Dude I feel like you are going to be right next to me in person when I attempt on my 2018 IM. Appreciate how detailed you are and step by step approach for this video. You are the man!!!
That may be true but unfortunately the options are very limited for the 2014+ models. Even if you were able to install the kit, you’d have to get a stand-alone ecu if you want to actually run a tune. A lot of time and money to sacrifice reliability. I think it’s better to stick with handling and cosmetic upgrades.
@@connorh2908 there is a kit and all that is true, but im sure the tune would be a medium pressure little risk to reliability. Its just one more step in maintaining due to adding a part, although I do see the concerns about extra pressure and heat being in the engine bay. I think the engine is good up to about 280 horsepower without being built. However the transmission is the big hold back part, unless you want to spend 5k on modifications for the cvt
@@connorh2908You're 100% right brother, The little that you would get back on the plus side is not even worth the reliability sacrifice.. Plus all the extra money you would spend just to get A little extra horsepower. Which in the end You're always going to have to worry about other parts on the car going out because it wasn't built for that kind of power.
This video was so helpful, the instructions added by Injen are straight cheeks. I would have not been able to do this, thank you so much for the tutorial!
For all who have a Corolla get injen cold air intake, borla exhaust, and pedal commander. Believe in me you'll be surprise the power it gives to the car💯
@@ownubadboy10 the exhaust and intake are just for sound, the pedal commander sharpens the throttle response which in turn also allows the transmission to downshift sooner so it does make it feel much faster, I have the pedal commander on my bone stock cobalt and it now drives much more sporty, I highly recommend the pedal commander for any car, it is legit a day and night difference.
I been following you for a while now and I never subscribed assuming I did but anyways I'm impressed with your Corolla. I'm doing little by little my corolla to be like yours, of course with my own look but thank for posting I've learned a lot from yours!
Awesome bro! what's next ? sound system? lowering suspension? whatever's next I'm sure it's going to be exciting watching the video and seeing you install it till next time.
I installed a K&N intake on my 2018 corolla, very different design. the filter head stays pointed up in the engine bay right where the stock filter was located, instead of going down into the bumper, I can see the bumper design getting more dirt into your engine honestly, its so much closer to the ground.
9 seconds that's slow from 0 to 60. Should do a computer tune. Where the rpm takes in more air on the higher rpm. Did it for my 2017 Corolla. Able to run 0 to 60 in 6 seconds.
DoyenEmile well it is an economy car :3 Understand his excitement , he tested it before this mod and was doing almost 12 seconds(give or take) , so the 9seconds really is an improvement.
9 seconds is fast for a Corolla. Stock corollas only do 12 seconds in 0 to 60. No you are not probably doing 0 to 60 in 6 seconds. probably your car is already moving or you are not counting right. Cool 👍
Jonathan Matos you should post a video showing that. And I wouldn’t be surprised to be honest, if a person can change gears like a boss, then a slow car can be fast.
This is hands down the best looking newer modified Corolla I have ever seen, it’s not my style but I definitely give this guy props for the effort that he has put into his car. If he swapped in a LS430 drivetrain it would be damn near perfect lol. Cool car bro and decent video. 👌🏻👍🏻😉
throttle body spacers are absolutely useless on EFI cars. They're a gimmick, literally, they do nothing. They used to be useful on carburetor engines, but not these days. Headers though are a good idea.
why do you have paddle shifters? great video, i already installed a cold air intake recently my honda accord se 2000, and love the new noise. Might do it for the corolla 2017 le eco.
Good video, that intake set up looks very nice and clean. Hey check out the megan racing H bar that goes underneath the engine, I have one installed on mine with a red trd upper sway bay, the upper with the lower make a big difference in stability and cornering. Saludos
Three months ago I bought a 2017 Toyota corolla SE exactly like yours even the same color blue crush mine is three years old however but I only got it with 5700 miles on it it’s a brand new vehicle I just got my windows tinted I love that you have wanted me to do something with my rams dark in my room’s instead of being black and silver I would like to have them all black could you recommend to me things that I would put on my rims to make them all black
If you want a few quick install tips. The bumper insert on the right remove that. Take out the battery and battery tray. You put filter and band in cavity waiting. Don't remove the bumper. You take off motor cover. You take out intake box. You have to pull up the throttle body. With sensor disconnected and air hose. You connect rubber hub to throttle body. 3/8 socket is usually the size of the bands. Hook up pipe around the battery and into the cavity. You hook up MAF sensor vacuum line. Then with you hand in the bumper knockout cavity maybe have someone hold the pipe so when you push upwards installing the filter. Once you have it installed move it check for rigidness. Then install motor cover battery tray and battery. If you have a few wires dangling use zip ties to secure. Put the insert back in when done. When you need to clean it you could keep it inside and rotate spray etc. If you want there's 4 clips you can undo and the filter comes out. Taking off the bumper is way too much work. Maybe I'll do a video on how to install.
Swagyrule3 they are called paddle shifters they are so you can go into Manuel mode the positive is for regular shifting and the negative is for down shifting
After you finished adding the intake and driven it a couple of miles did you ever get a check engine light or any light on the dashboard ?? I really want to buy one
Can you install the cold air intake without removing the front bumper? I think I saw another installation on an older model where he just removed the left headlight and battery.
De lo mio soy fan de su video quiero saber si tidabia estas disponible si esa modificación seria la mejor en rendimiento o si ahy otros mejores k ese gracias 🙏🏾
Wow, that 's a pretty good install. Did make any gain in horsepower? Sound of engine must be alot nicer. Are ever worry about voiding your warranty? I wish I live near you so I could ask help to modify my Corolla.
Una pregunta. Cada cuanto tienes que darle mantenimiento y si tienes que haces todo ese proceso. Por que hay otros intake que no es necesario quitar el bumper
Never had a problem with water. the height it fine, its below the headlight. but yeah if drive thru a lake it will soak water even the regular intake. cool thanks 👍
Any aftermarket parts installed only affects the related parts of the warranty. So let's say you installed the air intake and you have problems with brakes or transmission, the car company can't void those parts
I know the K &Ns will not void your warranty. However I believe Toyota already has some kind of modified air intake. And I asked the what's the difference between a K&n and they're TRD and they said literally nothing
That's not right,, they can void your warranty, if you engine fails it don't matter what part of the engine breaks they will say it wasn't the factory air cleaner and warranty is void. If you don't believe me call Toyota and ask... Happened to my best friend when he put a snorkel on his brand new 4Runner. He only went in for an oil change and they seen it and Red Flaged his VIN. But that was new in 2003, maybe they have changed their rules since I'm not sure but I'd call first.
I'm wondering how the heck you get to the filter to clean it if you have to take the bumper off just to install it. I don't see an easy way to reach it once everything is reassembled.
Hey Manual el carro se ve espectacular, solo quisiera preguntarte que sabes de hacerlo supercargado, (magnuson tvs 900). Solo que es extremándamente dificil de conseguir, si sabes de algo deberías hacer un video de eso. Saludos 🇲🇽🇲🇽🇲🇽👌👌👌
That's exactly what I was thinking. Imagine every time you need to do clean up on the filter. Would have to go trough that misión. I personally think a hps intake or Ares is a better way to go....
@@Shinegadget i tryed tonight again and it work well, i only changed pod position so idk but that good, it was cold outside but with normal filter it stoped, but for now its okay thanks
@@Shinegadget thank you! You're the first channel I found that does affordable mods to a Corolla and actually walks people through it your channel is awesome!
Parts & Tool List on the description of the video 👍
Thanks for Watching Please Like & Subscribe to more great videos! ✅ tinyurl.com/lmojpn9
Was up man. Do u think u can make a video of the pedal comander for our corollas? It's a tune u can buy online. Thanks.
Really nice job in listing all of the parts and tools. I hope that you get sponsorship. You have a good channel! I am glad to see that you went to a road that was empty and waited for the road to clear before you did your test; well done!
Your videos are top notch. You cover everything. Very professional. Well done.
I know Im asking randomly but does any of you know of a way to log back into an instagram account?
I stupidly lost my login password. I appreciate any help you can offer me!
@Ahmad Sebastian instablaster :)
Dude I feel like you are going to be right next to me in person when I attempt on my 2018 IM.
Appreciate how detailed you are and step by step approach for this video.
You are the man!!!
This is great! I just got myself a 2018 Corolla and this inspires me to do the same much love from the West coast 🙏
Cool thanks 👍
How did it turn out?
You're missing a turbo. That's what you need.
Just put it at a low-medium super safe pressure.
No problem. And instantly get 30-80+ hp.
That may be true but unfortunately the options are very limited for the 2014+ models. Even if you were able to install the kit, you’d have to get a stand-alone ecu if you want to actually run a tune. A lot of time and money to sacrifice reliability. I think it’s better to stick with handling and cosmetic upgrades.
@@connorh2908 there is a kit and all that is true, but im sure the tune would be a medium pressure little risk to reliability. Its just one more step in maintaining due to adding a part, although I do see the concerns about extra pressure and heat being in the engine bay. I think the engine is good up to about 280 horsepower without being built. However the transmission is the big hold back part, unless you want to spend 5k on modifications for the cvt
@@connorh2908You're 100% right brother, The little that you would get back on the plus side is not even worth the reliability sacrifice.. Plus all the extra money you would spend just to get A little extra horsepower. Which in the end You're always going to have to worry about other parts on the car going out because it wasn't built for that kind of power.
This video was so helpful, the instructions added by Injen are straight cheeks. I would have not been able to do this, thank you so much for the tutorial!
cool thanks 👍
I just installed one on my rolla. It sounds awesome!
Cool 👍
Thanks for the tutorial. Just bought one tonight. Plan to install it next weekend. Good thing you showed the jack stands.. totally slipped my mind.
Cool thanks 👍
😂 bought the same one 5 months ago still havent installed it thnx to this video I will! 👌
Cool thanks
Finally a somewhat kind of Performance mod!
Cool 👍
Neat paint job man never seen nothing like it
Thanks 👍
"Hahaha Feels so good, there's a guy over there hope he dosent call the police" lol
For all who have a Corolla get injen cold air intake, borla exhaust, and pedal commander. Believe in me you'll be surprise the power it gives to the car💯
Davis James what power? Hp? Nah dude
None of those things give power to the car though....
@@ownubadboy10 the exhaust and intake are just for sound, the pedal commander sharpens the throttle response which in turn also allows the transmission to downshift sooner so it does make it feel much faster, I have the pedal commander on my bone stock cobalt and it now drives much more sporty, I highly recommend the pedal commander for any car, it is legit a day and night difference.
I got a Borla Just need the other two, where you get the Paddle commander ?
2020 corolla?
Nice detailed install, I am sure the Corolla Nation appreciates this video! OORAH
Cool thanks 👍
I been following you for a while now and I never subscribed assuming I did but anyways I'm impressed with your Corolla. I'm doing little by little my corolla to be like yours, of course with my own look but thank for posting I've learned a lot from yours!
Cool, thank you for subscribing 👍
Yo I think that filter looks amazing great work
Thanks bro
FINALLY.!!! YESS Ima get mine too.! Nice video broo
Cool thanks bro 👍
It looks great! Another good job and you make it look so easy. You are having a great time with your corolla!
Thanks
Lots of respect for you brother, nice job, keep it up
Awesome bro! what's next ? sound system? lowering suspension? whatever's next I'm sure it's going to be exciting watching the video and seeing you install it till next time.
Yes sound and suspension. Cool thanks 👍
I installed a K&N intake on my 2018 corolla, very different design. the filter head stays pointed up in the engine bay right where the stock filter was located, instead of going down into the bumper, I can see the bumper design getting more dirt into your engine honestly, its so much closer to the ground.
Where did you get the intake ?
@@ice2002 Amazon
Ain't really cold air if you're getting it from right next to the engine
9 seconds that's slow from 0 to 60. Should do a computer tune. Where the rpm takes in more air on the higher rpm. Did it for my 2017 Corolla. Able to run 0 to 60 in 6 seconds.
Where can this computer tune be done? Id like to do tgis to mine.
DoyenEmile well it is an economy car :3
Understand his excitement , he tested it before this mod and was doing almost 12 seconds(give or take) , so the 9seconds really is an improvement.
9 seconds is fast for a Corolla. Stock corollas only do 12 seconds in 0 to 60. No you are not probably doing 0 to 60 in 6 seconds. probably your car is already moving or you are not counting right. Cool 👍
My 6MT 2015 Corolla does 0-60 in 7sec with a TRD exhaust and K&N intake
Jonathan Matos you should post a video showing that. And I wouldn’t be surprised to be honest, if a person can change gears like a boss, then a slow car can be fast.
When is that bike rack coming in
I like it, keep it up.
Man, I need one for my rolla
Thanks
This is hands down the best looking newer modified Corolla I have ever seen, it’s not my style but I definitely give this guy props for the effort that he has put into his car. If he swapped in a LS430 drivetrain it would be damn near perfect lol. Cool car bro and decent video. 👌🏻👍🏻😉
Put the vinyl wrap down, and slowly walk away
Pls
You would know all about walking, you likely don't even own a car.
That corolla is really cool but could you plz do more preformence mods and not wrap
he prolly gonna get there.
You can't spell😂
You should get the trd exhaust it sounds amazing
I might upgrade in the future. Thanks
Install a throttle body spacer and headers
throttle body spacers are absolutely useless on EFI cars. They're a gimmick, literally, they do nothing. They used to be useful on carburetor engines, but not these days.
Headers though are a good idea.
I mount the AEM brand is easier to install I did not have to remove the bumper and it is a complete piece! and at Amazon it cost me $ 120!
It work for Corolla S 2014 ?how many Horse powers you won?
Samuel HerMan you won’t gain any horsepower from an intake on an efi NA car
why do you have paddle shifters? great video, i already installed a cold air intake recently my honda accord se 2000, and love the new noise. Might do it for the corolla 2017 le eco.
That’s very cool!🙂👍 bad part I think it might have void your warranty!☹️
Se ve igual q el mío Manuel buen trabajo hisistes buena elección brother
Gracias saludos
No lie. You should change your exhaust to Magnaflow or Borla Exhaust. It will sound much more better 👌🏼
I probably will upgrade it in the future. thanks 👍
It sounds beautiful
Thanks
cool love your channel amigo
Thanks bro 👍
Did you have to tune the car ? Did any check engine lights come on ?
Quedó perfecto💪🏽💪🏽
Gracias saludos 👍
I wouldn’t need those radiator cooling fans in Canada. Lol😂
Good video, that intake set up looks very nice and clean. Hey check out the megan racing H bar that goes underneath the engine, I have one installed on mine with a red trd upper sway bay, the upper with the lower make a big difference in stability and cornering. Saludos
Ok I will check it out. Thanks 👍
Fuck the haters, i respect your build bro! Not my taste but thats good because its all yours!! have a good one brother
Hi which one dry or oiled filter is better in hp performance?
Three months ago I bought a 2017 Toyota corolla SE exactly like yours even the same color blue crush mine is three years old however but I only got it with 5700 miles on it it’s a brand new vehicle I just got my windows tinted I love that you have wanted me to do something with my rams dark in my room’s instead of being black and silver I would like to have them all black could you recommend to me things that I would put on my rims to make them all black
Inspired me to do so much with my car however I would have to pay someone because I am not mechanically inclined like you
These are the wheel decals for the corolla SE shinegraffix.com/product/2017-toyota-corolla-se-xse-17-wheel-decals/ Cool Thanks
16:15 for sound comparison
Hi 👋 what’s up have you gain much power to leaves at low velocity
Replace headers and throttle body next
If you want a few quick install tips. The bumper insert on the right remove that. Take out the battery and battery tray.
You put filter and band in cavity waiting. Don't remove the bumper. You take off motor cover. You take out intake box. You have to pull up the throttle body.
With sensor disconnected and air hose. You connect rubber hub to throttle body. 3/8 socket is usually the size of the bands. Hook up pipe around the battery and into the cavity. You hook up MAF sensor vacuum line. Then with you hand in the bumper knockout cavity maybe have someone hold the pipe so when you push upwards installing the filter. Once you have it installed move it check for rigidness. Then install motor cover battery tray and battery. If you have a few wires dangling use zip ties to secure. Put the insert back in when done. When you need to clean it you could keep it inside and rotate spray etc. If you want there's 4 clips you can undo and the filter comes out.
Taking off the bumper is way too much work. Maybe I'll do a video on how to install.
DO YOU KNOW WHATS THE BACK PARTS BHIND THE STEERING WHEEL ON EACH SIDE THERE AREE TWO HANDLES A POSITIVE AND A NEEGATIVE DO YOU KNOW WHAT ITS FOR
Swagyrule3 they are called paddle shifters they are so you can go into Manuel mode the positive is for regular shifting and the negative is for down shifting
Do I have to use a long black tube to attack the filter or is a short one okay to fit on it cuz I don’t want to remove the front bumper
After you finished adding the intake and driven it a couple of miles did you ever get a check engine light or any light on the dashboard ?? I really want to buy one
No, I didn’t get any check engine light 👍
Shine Graffix do you recommend one ?
Intercooler? Headers? What’s next?
5 horse power is a good gain for corollas
Yes thanks 👍
Nice walk through, Just wondering if you were considering oil catch cans?
Well, if I see oil on the filter I might get one but I haven’t see any oil on the filter yet. Cool thanks 👍
Get a Borla Cat-Back exhaust for better sound 😊😄
Yeah I might upgrade in the future. Thanks 👍
Can you install the cold air intake without removing the front bumper? I think I saw another installation on an older model where he just removed the left headlight and battery.
Yeah you can try that but the space to work is going to be small 👍
I really like it and im thinking on getting it. Me gusta 👍
Cool 👍
Cool paddleshifters
Thanks 👍
Cool man what next on your corolla I am going to buy one for my cat are you going to get any side skirts
Nice intake
Thanks
yessss! engine mods 👍👍👍👍
Thanks
De lo mio soy fan de su video quiero saber si tidabia estas disponible si esa modificación seria la mejor en rendimiento o si ahy otros mejores k ese gracias 🙏🏾
4 buenas modificaciones son el escape, filtro de alto flujo, la suspensión y unas buenas llantas. Gracias saludos 👍
@@Shinegadget k size de llanatas recomiendas el carro mio tiene unas de 16
Can you please do an air intake installation on 2012 Toyota Camry se
I don’t have a Camry sorry 👍
That’s for the response bro, maybe one day a friend of yours will tell you to install an air intake for them , by the way your videos are amazing 😊
Wow, that 's a pretty good install. Did make any gain in horsepower? Sound of engine must be alot nicer. Are ever worry about voiding your warranty? I wish I live near you so I could ask help to modify my Corolla.
Yes a little bit of horsepower but no that much. Yes it will void the warranty but I can remove it if I have any problems. Thanks 👍
What size were the rubber screw? Sockets??
Una pregunta. Cada cuanto tienes que darle mantenimiento y si tienes que haces todo ese proceso. Por que hay otros intake que no es necesario quitar el bumper
Cada 6 meses y puedes revisarlo por la parte de abajo del la defensa. saludos 👍
Nice car man
thanks bro 👍
I have one more question, aren't you worried about water soaking the cone of your intake?
Still good and no problems. I think the only way that it will suck water is if I summer my car on water or a flood. Cool thanks 👍
Link for the horns
Clean the hydro protector once a month, that's a lot of work to be taking the front bumper off monthly.
Ok, I don’t have to remove the bumper, only the plastic on the bottom. I think I will make a video. Thanks 👍
@@Shinegadget which plastic, the one in front of the wheel?
Yes but at the bottom where filter is
The link he provided is for a 2014, would it still fit a 2017?
Yes mine is 2017 corolla. It will fit 2014-2019 corolla sedan. Cool Thanks 👍
Puedes hacer un vídeo limpiando el cover del air filter en un mes ? Gracias
Si 👍
Where can i get one for my 2020 corolla se?
How high is the air intake air entrance point for the corolla 2016? Is it below the headlight? In case of a deep water pass though.
Never had a problem with water. the height it fine, its below the headlight. but yeah if drive thru a lake it will soak water even the regular intake. cool thanks 👍
Shine Graffix thanks, thats a good enough distance for water to reach.
Do you lose warranty from the dealer doing this? I want to do this to mine but I heard you do....
Any aftermarket parts installed only affects the related parts of the warranty. So let's say you installed the air intake and you have problems with brakes or transmission, the car company can't void those parts
I know the K &Ns will not void your warranty. However I believe Toyota already has some kind of modified air intake. And I asked the what's the difference between a K&n and they're TRD and they said literally nothing
That's not right,, they can void your warranty, if you engine fails it don't matter what part of the engine breaks they will say it wasn't the factory air cleaner and warranty is void. If you don't believe me call Toyota and ask... Happened to my best friend when he put a snorkel on his brand new 4Runner. He only went in for an oil change and they seen it and Red Flaged his VIN. But that was new in 2003, maybe they have changed their rules since I'm not sure but I'd call first.
It’s 2 years since this video, how’s the filter holding up that low in the bumper?
I'm wondering how the heck you get to the filter to clean it if you have to take the bumper off just to install it. I don't see an easy way to reach it once everything is reassembled.
You go through the fender well
Hey Manual el carro se ve espectacular, solo quisiera preguntarte que sabes de hacerlo supercargado, (magnuson tvs 900). Solo que es extremándamente dificil de conseguir, si sabes de algo deberías hacer un video de eso. Saludos 🇲🇽🇲🇽🇲🇽👌👌👌
Si estaría padre, pero no he podido encontrar algo que le quede. Saludos gracias 👍
Any problems with it sucking in water if you go thru a big puddle?
No, no problems 👍
KING
i suggest catch can next!
Quisiera saber si en realidad tuvo efectos en la potencia del motor... Saludos.
David Bautista literal no los tiene amigo, para que cualquier parte performance tenga un efecto en el motor se tiene que tunear el CPU osea una repro
@@mikevazquez8346 Gracias por la información, amigo, investigaré al respecto.
Have you tried to look for a aftermarket exhaust manifold
acep170 why on earth would he get a header? it will be too agressive for the cvt and the engine
latinboy2011 he doesn’t have to install it I’m currently looking for one for my car. Just curious if he’s found one.
Send link to replacement filter for this
Injen Filter X-1014-BB 3" amzn.to/3h2jbFs 👍
rythmica came on i thought my phone wAS RINGING
Would this fit for the 2017 Corolla IM?
Will this work for 2017 Corolla iM?
What's the name of your Exhaust system, you have?
ebay.us/uMpe0D 👍
It looks like a pain to change :3
Interesting mod though
That's exactly what I was thinking. Imagine every time you need to do clean up on the filter. Would have to go trough that misión. I personally think a hps intake or Ares is a better way to go....
Why do you do such cars without being fined?
Ya hacía falta!! Jajajaj just kidding 😆Looks cool! How well does it run now!??🤩
Works good a little gain but just a little bit of gain on power. Saludos 👍
Where did you get the paddle shifters???
th-cam.com/video/2vjAqIsZNHY/w-d-xo.html 👍
Wanna do thos but not enough diference and would void warranty sadly
should of hit the shift panels but good work tho
Do you know if this fits the 2010 corolla?
This will fit 2009-2013 corolla Intake amzn.to/3svycIz 👍
9 seconds is an improvement. Stock rollas 0-60 in 12-13
Yes 9 seconds is fast for a corolla. Thanks 👍
How much horsepower have you added to your 2017 corolla since it was stock
a pony's worth
hey is that normal yesterday i installed k&n filter and it smoked little white on exhaust so i changed it back to stock :v
was the car cold? if it was cold yes its normal
@@Shinegadget i tryed tonight again and it work well, i only changed pod position so idk but that good, it was cold outside but with normal filter it stoped, but for now its okay thanks
Don’t you have to tune it right after the intake?
No tune, still the stock 👍
Headers next?
How much horsepower did you gain
Will this work on the LE model? I got the LE model and am doing little things to make it look and sound good
Yes it will work for the LE too. It has the same engine. Cool 👍
@@Shinegadget thank you! You're the first channel I found that does affordable mods to a Corolla and actually walks people through it your channel is awesome!
Thanks bro 👍
Mine is a 6-speed manual will it go faster since it's a standard?
Yeah maybe 👍