How To Load a Motorcycle Into a Truck at RevZilla.com
ฝัง
- เผยแพร่เมื่อ 31 ก.ค. 2015
- How To Load a Motorcycle Into a Truck
www.revzilla.com/common-tread/...
There's lots of ways to get your bike into a truck, but not all of them are safe for the bike or for you! Check out a few techniques the ZLA team has put to good use over the years. Whether your riding it or driving it, you want to keep the shiny side up. Stay tuned and we'll show you how! - ยานยนต์และพาหนะ
+Daniel Goon The trailer is made by Kendon. -DrewZilla
LMFAOOO!!!
Hey Revzilla, you forgot one major part. How to safely unload the bike down from the pick up truck. Can you please add that to the video.
@@jsmith4844 Just get a hitch hauler, super easy to roll up and off.
I've been driving around with my motorcycle in my truck since August of 2015. When are you going to show me how to get it out?
Just play this video in reverse!
Bruno Bronosky actually thinking the same thing. Never had a problem getting on into a truck but getting a big bike out, by yourself is a whole different story.
@@accouswk "by yourself" is likely the problem. If it takes two to get it in it will take two to get it out.
Daniel Brain only took one person and one ramp to get it in - Lol - getting it down with out 2 or 3 Ramps side by side for walking it back while seated
@@accouswk i get mine in by myself the exact same way i get it out.
Sweet, but can you show us how to load a truck on a motorcycle too?
+SnarkieVlogs Somehow I knew this comment was coming...
+DaBrute how did u see this one coming?? I didn't even think of this one
+SnarkieVlogs Can be done with a goldwing.
+Ralph Livingston uhhy?!p
SnarkieVlogs 😂😂
This dude speaks so clearly and energetic.
i dont know why am i watching this if i dont even have a motorcycle neigther a truck.
homo est deus lol same
Because when you buy your first bike and the seller doesn't know what he's doing, then you have a good chance of getting the bike home in one piece. The tie down description applies to trailers, vans etc, which can all be rented or borrowed. There's nothing like sending pics on FB of your new purchase and midway home getting replies that you've done it totally wrong.
flip acoin same here
Because your smart and want to be informed
Nothing wrong with learning something new. At least now when you see someone doing it wrong or having a hard time you can help.
you need to put a waning in there about when they unstrap to make sure someone is holding the bike down when you release the pressure. the first time I unstrapped my first bike I didn't do it. The bike almost flipped off the trailer. busted the fairings on my first bike during the first 20 mins of having it. it was a lesson I only had to learn once.
Love the Hill, that is the first thing I look for....
+Paul Bahre
Yes, it was nice. There is a little bit for everyone in these videos.
Lemmy is such a great presenter. Nicely done.
true dat
I rented a small, covered UHaul trailer and used a piece of wood supported by a concrete block to load my sport bike. Then I strapped the bike down inside the trailer with tie downs. I think it only cost $50 to have the trailer for 3 days. The only annoying part was standing in line at UHaul.
Not to mention a week later you start receiving threatening letters from U-Haul that you didn't pay the invoice because their staff that works at those places are too incompentant to do their jobs correctly. It's happened to me twice! ...and I even had the CC paid receipts. Took me weeks to get it straightened out. I can't say I'll ever give them my business again.
U-Haul actually rents motorcycle trailers. No modifications needed
@@drdrew3 They didn't have any motorcycle trailers available.
No wheel chock required if you load the motorcycle angled so it's front wheel is wedged into one of the front corners of the bed; driver side preferred; and slide the back wheel against the opposing side.
-
Also put the motorcycle in gear and rotate the rear wheel backwards; while keeping bike still; to take up the slack in the drive train.
-
Loading this way holds the front wheel securely, aids in preventing the motorcycle from rolling backwards, and tie-downs most likely will only be required on the back end of the motorcycle.
-
This method has served me well for decades with compact pickups and all motorcycles except full dressed touring bikes.
I'm glad you said this because I was just trying to figure out how I was going to load a bike without the chock
Yeah I once transported a friend's bike home 500 miles when he dropped it and wound up on the hospital while on vacation. I was in the area and had a utility trailer so I just rammed the front wheel into a corner, put the bike diagonally across the trailer and strapped front and back compressing the suspension about 1/3 of the way down. Drove 8 hours at expressway speeds and it didn't budge an inch.
There’s always more than one “right way”. It just depends on your setup and equipment. He have done excellent tips to get off to a safe start
"slide the back wheel against the opposing side." Yeah that aint happening with a Zx14..
I love Lemmy! I learn a lot from watching him, he is very thorough in teaching. And he doesn't bore you to tears lol. Good stuff!
I'm always impressed with all of your guy's videos and your presenter's speaking/language skills. Nothing deters someone from an instructional how-to video more than someone who can't even speak well enough to get the point across. Great video, thanks.
These videos are great. Keep em' coming, Lemmy & crew!
I like how this guy explains shit.
Food goes in, Poop comes out.
I legit thought this was a How To Basic video just from the Title alone
Awsome video. Everything you want in a "How to". Lemmy is great. He talked fast and explained it well.
Man, that was an excellent explanation and demonstration on how to load a bike in a truck. Thank you!
Outstanding video Lemmy, thank you for taking the time. Very helpful.
Absolutely awesome vid! Easily to comprehend and useful information. Thank you!
You speak quickly into the point and the production of this video made it so much more clear thank you
Dude... You guys are so helpful and make getting a new motorcycle so much less scary
Lemmy is the fucking man! Great video guys, very informative to us noobs.
Informative and easy to understand. Great job!
This is an excellent, excellent video. There are SOOO many videos on TH-cam where some guy's bike goes off the side of the ramp and falls on the ground, often with him trying to ride it up there! This vid is very useful. I learned several good tips.
Great video! Organized, concise, and great tips. Thanks!
Great video, I have riden a couple of different motorcycles but never carried one on the back of my Truck and always wondered what was the best way to do it, this is a great help.
If you own a truck the best way is to get a utility trailer and add a wheel chock. One you have a utility trailer you will find many uses for it. And the wheel chock gets daily use in the garage
Great video, well explained, keep up the good work!
Looking to buy my first motorcycle. Thanks for the video. It's helping me figure out if cycling is for me. I can't take just the ride into account. Transporting it maintenance cost personal limitations and local laws all play a roll in my decision.
Edit: just remembered the riding gear too.
Very good video. The only thing I take issue with is removing the tailgate. I've been moving bikes with trucks for 30 years and have never removed a tailgate. I've even moved a Harley dresser with my base model 2004 Tacoma with no issues. Otherwise the advice presented is spot on.
Lemmy,
This was an informative and entertaining video. You guys rock!
I appreciate that you talk quickly and succinctly, so many instructional videos don’t
Instead if running the motorcycle up the ramp and end up with the arms above your head (a very risky procedure), put a small portable stair beside the ramp and step up as you follow the motorcycle on the ramp.
In that way you will alway have the arms where your strenght is and can even load the motorcycle alone.
I have two identical ramps- one for bike and another for myself going up
I don't know, standing on a ladder with a motorcycle also doesn't sound exactly safe to me...
This is good stuff - DEFINITELY needed info besides product reviews. Thanks RZ!
Love these videos guys. Keep up the good work!
this video deserves 11 out of 10 points.
a big Thank You.
Very good instruction and clearly enunciated - thanks a lot Lemmy.
Thank you so much for making these videos.
Great tips - very concise
So detailed! Loved the video. Thanks Lemmy
love the videos man keep it up
Thanks for posting this video!!! Best regards from Brasilia, Brazil.
Thanks Revzilla. Next level info. Lots of firsts here: - First to mention loading DOWN INTO the truck instead of UP or PARALLEL- First that stresses precommunication of roles- First to mention ratcheting to the MIDDLE of a folding ramp- First to recommend using a TRAILER as an alternative- First to recommend taking OFF the tailgate
Best, most useful video ever!! I really like this guy!!
great channel! Lemmy is the man
Your videos are excellent. You have really great presentation skills
Good information. We trailer our bikes out of Texas on our annual Beat The Heat motorcycle tour. I have videos from our tours, but never filmed when securing our bikes.
Yay! More Lemmy videos! Keep 'em coming.
Thanks guys, this was very helpful.
Excellent, I like that bit about using a hill if one is available...good stuff!
Loving RevZilla, Lemmy, and that gorgeous Triumph! Hopefully, the newbies don't load any heavies this way. XD
great vid. OMG the street triple looks so much nicer with a traditional headlight
+Kyle Bright: This is pretty contested, but Lemmy just compresses the shocks most of the way until the straps are snug but not overly tight. -DrewZilla
if I'm 5'1 can I ride and reach the floor with a Honda Grom 2015
Yes, the Grom has a very low seat height, so at 5'1", you can reach the ground. -DrewZilla
RevZilla what trailer was that you showed?
Moto_ R1 I’m 5’4” and very comfortably rode the Grom
This reply made me laugh so hard in its randomness.
One trick I do with ratchet strap ends is when the main strap is almost snug to my liking, I thread the tail into the entry point of the current strap. When you ratchet a little more, the tail is pulled into the ratcheting system, securing it with ease, and also easy to pull back out when the disengage of the ratchet is committed.
Ratchet straps release all at once but they are the best for getting the bike nice and tight. Tip: double up your ratchet strap with a Yeti or similar friction tie down after you
have secured the bike, then when you release the ratchet strap it transfers the load to the friction strap which can be gradually released in a controlled manner.
Awesome vid man! I'd rather load my bike in the back of my truck but unfortunately I have no friends to help. I'll be going the trailer route but I still found this useful for future reference.
Awesome content! Thanks Lemmy!
Thanks Lenny. You convinced me I should spend $25 to rent a motorcycle trailer from U Haul!!
Next up: Securing 2 motorcycles in a Truck!Then: Loading a Motorcycle into a Truck, all by Yourself!Great video, Lemmy. I've learned how to avoid some expensive fails in the process. Thanks.
Many thanks for the video. Just loaded my Bonneville with no trouble at all, it turns out we even have the same model of ramp.
Just a little side note, when you insert the loose end of the ratchet strap to the ratchet itself its a lot easier if the ratchet is in the closed position.
I usually click the ratchet to turn the slit to the angle where its the easiest to insert the loose end.
It minimise the duration of the "unstable" part of the process.
For those extra paranoid about their fork seals like me, I recommend using cam straps on the front. These mostly prevent you from over ratcheting and putting too much pressure down on those seals. Pull on the straps while sitting on the bike until its just tight enough to prevent the bike from wiggling
Fork seals don’t get blown by strapping the front end down that’s not how it works
great vid. buddy, you just got a subscriber.
nice tutorial, well done 👍
That Triumph looks amazing. And great instructional video!
Definitely beautiful. Do you know the model?
@@alejandrocotilla2899 Looks like a Triumph speed triple cafe racer to me. Or are you referring to Lemmy? He is quite the model.
Andrew P lol thanks! Lemmy is quite a model for sure!
Street Triple... single headlight.. SACRILEGE! Haha. I considered doing it to my STRx as well but those damn bug eyes grow on you! Picked mine up in a truck like this. (Wanted to do a hard break-in so couldn't ride it home on the highway for hours) Probably the best video I have seen done on doing this.
Very nicely done video!
Lemmy is my hero!!
I use a big boy II ramp, a pair of tailgate locking bars that prevent the tailgate from collapsing under weight.
Loading the bike is the easy part for me. Unloading takes a lot more effort and attention to detail to prevent damage to the bike and to myself.
Just did a thousand miles (eastern CT to western PA and back) with a zrx1200 and a z900 in the back of my '16 f150... Nothing but ratchet straps, an atv ramp, and fortuitous hills near the driveways 😎.
Great video !I also leave the bike in 1st gear.Cheers
My favourite duo. Can you teach other methods too? Especially if we need more space in the back.
nice ideas! good video. Informative!
Great content guys!! Thank you
I once loaded a Harley Dyna Low Rider into my pickup and my (former) buddy was telling me to position my truck on an incline (front facing up) and then put the ramps on the truck. We argued about it, but he had been a motorcycle guy for like 30 years and I was new. Anyway, the center ramp (I was using 3 ramps) was never secured and I had no idea how to do it. Well, the center ramp shot out and my (former) buddy caught the bike. minor damage, but I was pissed. This video shows the right way to secure the ramp.
Awesome job!
Well done Lenny!
best tie down I have used is a called a canyon dancer it goes over the bar ends of your bike and then attach a ratchet strap to each end loop and as the straps tighten it pulls in on the bar ends it avoids putting stress on the forks from the sides and also use a suspension saver to alow you to get a good tension on the straps and keep from fully compressing the forks and risking damage to your fork seals if transporting for a long period of time.
You guys have everything!
great video with alot of tips..any safety tips or techniques with a single person loading the bike? I know steep angles should be avoiding especially with full fairing bikes
There is also the big cooler method. When loading the bike step up onto a cooler placed lengthwise along the ramp. You have much greater control thru the process and can load lighter bikes yourself this way.
I use this method using a Condor chock & Canyon Dancer bar strap. Rock solid.
Good video. I also like to put 2 separate straps on each side up front. Just in case 1 lets go, you have a back up. Could save a lot of headache.
Video is hella mindful!😐😧Thanks👏🏾
Thanks Lemmy! You da man!
This fuckin guy definitely knows how to present a video!! You the man Lemmy
This is cool man!
Good stuff, thank you sir
Great video!!
I've loaded a triumph tiger into the back of my f150 on my own. The trick is a 10ft ramp for the bike and a 6ft ramp for me to walk up. I do use the engine to pull the bike up the ramp. So clutch and brake to control speed and just walk up next to it. Unload is just the reverse, front brake to control speed, and it goes down the 10ft ramp while I stabilize and walk down the 6ft ramp.
i load mine into a minivan. other than the pain in the ass process of having to remove the wind/headlight shield bit and the mirrors. a great process! and the cool thing is plenty of places to attach straps too thanks to all those seat hooks!
Great video, Lemmy. BTW what kind of name is Lemmy! Is it short for Lemon?
Do you improvise all of your explanations? You never miss a beat and you explain stuff very clearly.
Do you need to do alot of takes? You do a great job.
Also put the motorcycle in 1st gear. This is how I loaded my motorcycle on a trailer and throw a blanket over the seat and put a strap over your seat. Your bike won't move at all. Good advice in your video ;)
I had to transport my dads bike yesterday and I couldn’t get the bike strapped down, my ratchet straps were way to long so I had to improvise by using one hook wrap around he handle bars a few times, go down to the opposite bed hook, then wrap around the bed hook and go to the rear bed hook so I could ratchet it tightly, and I also left the kickstand down to help with some of it. Wasn’t the safest but it worked and didn’t have any problems
Thanks Lemmy ...my truck is much higher, so I need as many useful tips as I can get !!
In lieu of having a hill - we always loaded stuff into our pickup back on the farm by backing into a ditch then driving around on the road and down into the trailer. With the tailgate down you can just drive right in without a ramp with a bike or lawn mower or whatever.
great vid man
Thanks Lemmy you da man!
Jay Leno has come out of retirement and is now incognito. Also, I was thinking about buying another lighter motorcycle to haul in my truck bed (no way with my 900# Harley), you've changed my mind. Thanks.
I just used this technique and 3 guys to load a Harley street 750 into a tiny uhaul using rented home depot ramps. It works but definitely go the trailer route if you can. You dont realize what you're getting yourself into until a 500+ lb. Bike is precariously perched above your shoulders.
Great video
That tacoma is sweet with the 5 speed!
Lo guys good vid. I found something very helpful once but accident witch you might try and pass on if you like it. Try putting the bike in gear for loading and unloading the clutch then works like a dead man's handle and gives a much safer control over holding a brake imo. When you let your mate take over you would have just let the clutch go and moved to hold the back of the bike before you buddy even got to the front.