Had to do a double take at your subscriber count...only 78!? Great video dude. You are destined for greatness here on TH-cam. Video content, quality, and edited are top notch!
Hope you doing well with you move to new home and covid - 19 but new idea comes from challengings time . Always appreciated your organized and clean work . Yes , as a son of engineer with had 4 engineer degrees I just learn to love and breath organized approach to tasks . Thumbs up 🤓
*Wow, I'm truly amazed by your dedication and creativity in renovating your garage on a budget! Your resourcefulness and ability to transform the space into something functional and appealing is truly inspiring. It's so refreshing to see someone take on a project with limited resources and turn it into something incredible. Keep up the fantastic work, and I can't wait to see the final result! Your efforts are a reminder that with passion and a little ingenuity, any space can be transformed into a wonderful haven. 👏🛠*
Yeeees totally agree! They're so inexpensive but I hardly see anyone use them. I used to wonder if they were just a gimmick but I won't paint without them now 😄
Only if you have a very smooth surface, don't need a very clean cut in, and don't have the skill with a brush. A brush will give you more control with how much paint you put on and most people don't use enough. However, I started painting as a pro 25 years ago so it is second nature and I can cut in left or right handed with contrasting colors better than many tape jobs........many corners are not straight and I can compensate with a brush to make a line that appears straight on a textured surface. Use a pole on your roller and keep it wet, it should not have a noisy sound of the dry nap pulling away from the wall. You are right about brushing and rolling giving better coverage than the small airless. Nice job on the light cords. I have the same lights and plan to trim the wires after I finish the major rebuild I'm in the middle of for my garage.
Personally, I think that it says a lot about you that you captured and released the spiders rather than killing them. Found some useful ideas for my own messy garage. Great video, I'll be checking out more of your content. Thanks!
Painting tip--unless rolling in a very tight space, always extend the handle on the roller. A simple 3’ wood handle will double your speed and give you a smoother finish. Painting a full wall using only the roller is choppy, slow and eventually beats up your hands & wrist. A+ on the remodel. You really invested time in places where it matters.
I watched this video while on a random TH-cam binge and I would not have thought in a million years that this was someone first video on a TH-cam channel. So freakin good!
Nice clean & bright look. Can’t wait to see u fill it up with tools and supplies/materials. I can’t wait till I can get a shop and get my tools out of storage and do pretty much what u did.
Thanks man! I am so excited to build it out more as well. I'm thinking French cleats, workbenches, dust collection, storage cabinets.. who knows what else. Good luck on your future builds! If you make a video let me know!
Danny, you are THE man!!! It really is easy, if you have patience and a little know how. I stumbled on your channel and showed my 12 year old son (we both agreed the editing and music are great). We are starting the garage reno next week and got some great ideas From your video. God bless and keep makin videos please. Much like TV, TH-cam is quickly getting littered with trash.
definitely one of those videos where you start at „ugh 15 minutes?! I’ll just skip trough it“ and end at „HOW THE HELL DID I JUST WATCH THE ENTIRE THING?“ haha! great job on the reno and the vid 👌🏻
Haha thanks so much! I was really surprised how much I had to speed up and cut out and still be 15 minutes 😩. I also found out getting the whole thing cut down under 1 minute for instagram was impossible 😂
I really enjoyed watching, can't wait for part 2. Those painting pads are fantastic, I have several rooms with feature colour on one wall and those pads are fantastic for neat corners and no messy bleeding edges. Brilliant video, keep up the great work. Consider me Subscriber 384... :)
Next project, Paint the floor with garage floor epoxy paint. You wont believe the difference, it really gives the garage a clean finished look! best of luck.
Should add some edge banding /trim to the front edge of the work surface. If it's all chewed up, you can cut a clean edge on it with your skill saw and just use a bunch of wood glue or construction adhesive. Would really polish the look.
Amazingly easy to watch . First time viewing you channel and do not know your professional background but you make a pleasent easy to follow , well done !!!! You are on your way especially shop nation ( engineer ) making a positive comments a bonus 😎
Dude. Danny! Man, it has been a minute. I saw you post on FB and checked out your TH-cam. This video is so good! You're a natural. Can't wait to see more. I hope all is well!
Thanks Doug! My original plan was to paint the whole thing, but when it dawned on me how quickly it’ll get beat up I changed my mind. I think I prefer this way anyway!
Hell yeah. As for under the work bench... mini fridge, LEDs to see better, a stereo. Or like you said, drawers. Maybe leave room for a vice. Looks a lot better tho. Good job.
Maybe a mini fridge would be a good addition to the empty spot in the middle of the work bench. Also, what soldering iron is that? Looks like it distributed solder out of the end making it very easy to do.
Good suggestion! I may have to do that. It’s a super cheap standard solder I’ve had for years. I just pre-soldered the cables to make it a little easier on me because I’m terrible 😅
I seriously cannot believe you only have 889 subscribers. Glad I found you this early. It's going to be fun watching your channel grow! Best of luck to you :)
Nice job. Looking for ideas for finishing my garage which is bare studs for the outer walls and got a number of them. The only thing I could suggest is the next time you paint the ceiling get the whitest high gloss paint you can find to increase the light in the garage.
Love the details in the video and the fact that you mess up shows you're just like anyone else. Not perfect! I just got a garage and this vid makes me feel more confident about doing it myself. Thanks!
Hahaha that project creep is a real thing, and probably how most projects get started... "if I'm doing this, I might as well go ahead and do this..." lol! I'm a little embarrassed to say your "dirty" garage looks clean compared to our mess, but this is super inspiring! Great video quality/editing too!
Thank you! 🤗 It really is a good/bad situation. Good because it forces me to learn but at the same time I often bite off more than I can chew 😅 Honestly, the “before” was after about 12+ hours of cleaning. It was baaaad before-before haha.
Immediately purchased those lights from your link! Just installed half of them today and it blew me away! Thanks for that man! Somehow I never saw these and they have stellar reviews!
That's a good garage cleanup - thanks for posting. A couple of corrections and tips to help yourself and others: 1) That "beam" @12:20 is a post. Posts go vertically, beams go horizontally. 2) That's not how you roll paint @11:45 lol! Use an extension handle on the roller, do NOT use the roller handle like you did. Your way is way harder on the back and legs squatting like that, puts your face close for paint droplets flicking off the roller, and most importantly, ensures uneven coverage of the paint on the wall. When you use an extension handle (eg 5') you stand back from the wall and use leverage to radically reduce the movement in your arms making for much easier rolling for much longer for much less effort. It also smooths out the paint with much more even pressure on the roller and gets you well away from the roller itself for less paint spatter AND you can gauge coverage more accurately. 3) When you roll, use a "W" or an "M" technique which also evens coverage and reduces banding. 4) FWIW, I would go draws under the bench with foam cutouts for tools. 5) A very cheap way to improve your concrete garage floor would be epoxy paint with flakes in it. Looks great, is very hard-wearing, and relatively easy to DIY. 6) For the LED lighting, I would make a small ceiling hole above the fitting and feed the joining cable between lights through that. Much neater and no cutting / re-joining with solder.
1. Good call out thanks for clarifying. 2/3. Agreed! My intention wasn't to provide a painting "tutorial" so I left out a few details. When I say "long, overlapping lines" - I do not lift the roller, result in long M's and W's. I prefer this to the common 'random' style because, for me at least; it lessens the chance directional variation in the finish. As far as extensions go - I couldn't use one in this particular spot because there is another wall directly behind me. I would have ended up with more holes to patch 😂 4. I'm diggin' this idea. That may be a winner 🤙 5. I've considered this a few times! Call me old fashioned but I actually prefer the raw concrete look, cracks and all 😀 6. That's another good one. I did later clean the cords up with cable clips and it doesn't look half bad!
I don't have a garage but I do have work to do around the house. It is often hard to find motivation to do repairs and improvements, but watching this video helped
I love that thanks for sharing! I can say what I’ve found to helps me personally is the practice of “chunking” where I break a task into smaller parts so it doesn’t feel so overwhelming. So instead of thinking “I have this entire project/video to do this weekend”, instead I will just say “I’ll work on this for 30 minutes whether I want to or not”. Once I’m in it, I tend to get in the flow and work much longer. Anyway I hope that helps and thanks for watching!
Nice titling blending into the video content! Nice space after the renovation! Very professional feel to the video editing. All the best, Rob in Switzerland.
I totally get that 🤙🏻I didn’t paint it because I felt the paint would have been tore up pretty quick and I planned on putting doors on it eventually as well. It’s kind of grown on me though!
Nice video! There are tons of these channels on TH-cam, but not many that say “I did this, but I messed up” That’s very inspiring to a (very) amateur DIYer!
Well, the new, more extended lighting fixtures make a huge difference!! Jumps right out, in opening pictures! 1) dust, patch and paint walls, ceiling. Corner protection. 1a) Killz products for primer. 1b) Repair windows, window trim. Door trim. Paint trim. 2) vacuum, sweep, leaf blower. 3) install new lighting. 4) remove item, sort, declutter and keep only what you truly need, use. 5) repair work bench and wood shelves. Set to height for storage bins. Paint. 6) pipe column.... paint it, or wrap for decoration. 7) upgrade door knob, lever style hardware. The end.
Love this video! I'm currently working on a small outdated garage and found this super inspiring! NO JOKE on how terrible sanding is 😭😭😭 Glad you got through it, the results are wonderful :D
I think some cabinet ambiance light, epoxy floor and wall or hide-o garage utility hoses (air,water,vac,power washer?), Some creative power tool storage and charging station for lights and power ools. Ryobi make a dope garage door opener that's modular taking the power tool battery and having accessories like air, fan, Bluetooth, WiFi, just out of my budget. I need a poor man's version of that. I have a 2 car garage with little to no room to work with and two giant garage queens
All great ideas thanks! 🙌 Epoxy floors have been one of my most requested. I may have to do that sometime soon! Otherwise, I'm 100% onboard with better storage and kind of where my heads at right now. Thanks Garrett!
I'm way too damn lazy to manually sand. I just get a shitload of orbital sanding pads and switch them out. I of course attach the output into a Dust Deputy going into my vacuum with a vacuum bag. Works great and the Dust Deputy saves you a fortune on bags and filters.
I love how you’re funny, too!! There’s a really cool guy (I think his logo was Carma) that turned his garage into “showroom white!” He did the floors AND insulated the garage door and insulated the walls, added drywall and even put up an amazing air conditioning DIY kit. Pretty cool! Love the blue shelving btw!
Thanks Jay! That's super cool! Some of the garages I've seen on YT are mind-blowing. You may be interested in @ABrazHouse. He built a whole studio and a freakin-attic lift; puts mine to shame! 😆
@@ModernRemade whoa really?? Checking it out now, thanks for the suggestion!! Btw the guy I was telling you about installed a split DIY mr. cool kit a/c unit that can be controlled with your phone!!
@@ModernRemade We've all been there. If you need advice or anything I'd be happy to offer it. You've taken a step I've wanted to do for years, start a youtube channel, so I commend you there.
Thanks Ryan! Since it picked up in the past few weeks I’ve kicked it into gear for the next one. I am 90% done so it should be out this weekend 🤞🏻So glad you liked it!
You got what it takes calmness, humor accompanied with practical projects. Into today's world environment with uncertainty is a magnet thus keep at it and run with it 😊
@@ABrazHouse Unfortunately not, my Instagram game is pretty weak 😅 Looks like only about 15 views came from there. Just about everything else came from TH-cam browse features 🤙
IDK why I waited so long to get a paint sprayer. We are in our second house now, and it needed to be remodeled bad, so I got a paint sprayer, and I am so happy I did. Makes painting so much easier and faster. I will be remodeling my new garage in the spring after I finish with the inside of the house
trying to close on our 1st and forever home...it has a 2 door garage with an office/mancave area that will eventually have a full bath...but 1st I got to paint and add spray foam insulation... thanks for the pole idea but will try to do 2 colors weaved together
Hey congrats! The pole was one of my favorite aspects of the reno, it looks really cool 🤙🏻 if you post yours online please shoot it my way I’d love to see it!
Instead of wooden runners to protect the shelves, when we built shelves in my buddy's garage, we used a DIY bedliner kit to cover the shelves. It's a decent finish, it is super easy to clean, and wears extremely well.
leave the empty space under the work bench and just add foot step for when you are sitting and working on a project you'll have space to tuck your feet in and be able to sit comfortably.
Had to do a double take at your subscriber count...only 78!? Great video dude. You are destined for greatness here on TH-cam. Video content, quality, and edited are top notch!
Thanks a ton man! Your comment made my morning 😀
Congrats on your 100k subs, you deserve it!
it's 10x after only a week... That's some impressive growth
What camera are you using to shoot ? Good video I plan on starting up a channel will definitely subscribe to yours
Hope you doing well with you move to new home and covid - 19 but new idea comes from challengings time . Always appreciated your organized and clean work . Yes , as a son of engineer with had 4 engineer degrees I just learn to love and breath organized approach to tasks . Thumbs up 🤓
You went from 78 to 1.82K in a month. Very nice. Video was fun to watch. I wish you great Success.
The most dangerous phrase when doing any renovation...”While we’re at it..”
😂 no kidding! Followed shortly after by “what have I done...”
Getting the wife involved is definitely the most dangerous idea 🤣
“ I had the exact amount needed, so long as I didn’t mess up....and I messed up”. You have just quoted every project I have done to date 😂
Great work. The face frames made this go from typical raw garage storage to something more elegant. Thanks for sharing.
You’re the man Matthew, much appreciated! 🙏🏼
*Wow, I'm truly amazed by your dedication and creativity in renovating your garage on a budget! Your resourcefulness and ability to transform the space into something functional and appealing is truly inspiring. It's so refreshing to see someone take on a project with limited resources and turn it into something incredible. Keep up the fantastic work, and I can't wait to see the final result! Your efforts are a reminder that with passion and a little ingenuity, any space can be transformed into a wonderful haven. 👏🛠*
At 10:59: Those trim pads are the best kept secret in the industry. They are totally awesome. One is crazy to do trim without them period.
Yeeees totally agree! They're so inexpensive but I hardly see anyone use them. I used to wonder if they were just a gimmick but I won't paint without them now 😄
Only if you have a very smooth surface, don't need a very clean cut in, and don't have the skill with a brush. A brush will give you more control with how much paint you put on and most people don't use enough. However, I started painting as a pro 25 years ago so it is second nature and I can cut in left or right handed with contrasting colors better than many tape jobs........many corners are not straight and I can compensate with a brush to make a line that appears straight on a textured surface. Use a pole on your roller and keep it wet, it should not have a noisy sound of the dry nap pulling away from the wall. You are right about brushing and rolling giving better coverage than the small airless. Nice job on the light cords. I have the same lights and plan to trim the wires after I finish the major rebuild I'm in the middle of for my garage.
Slick edit! Great voiceover! I can see you going places in the DIY world in a hurry!
Thanks so much! 😃 I hope so!
Personally, I think that it says a lot about you that you captured and released the spiders rather than killing them. Found some useful ideas for my own messy garage. Great video, I'll be checking out more of your content.
Thanks!
I appreciate that Craig and glad you liked the video!
Painting tip--unless rolling in a very tight space, always extend the handle on the roller. A simple 3’ wood handle will double your speed and give you a smoother finish. Painting a full wall using only the roller is choppy, slow and eventually beats up your hands & wrist. A+ on the remodel. You really invested time in places where it matters.
I watched this video while on a random TH-cam binge and I would not have thought in a million years that this was someone first video on a TH-cam channel. So freakin good!
Thanks so much man that means a lot! I felt like a put a ton of time into learning so I’m glad you think it shows 😃
Yeah, I was surprised to see it was the only one for that reason too
Nice clean & bright look. Can’t wait to see u fill it up with tools and supplies/materials. I can’t wait till I can get a shop and get my tools out of storage and do pretty much what u did.
Thanks man! I am so excited to build it out more as well. I'm thinking French cleats, workbenches, dust collection, storage cabinets.. who knows what else. Good luck on your future builds! If you make a video let me know!
great job dude! i am currently removing my popcorn ceiling and doing a skim coat on it... so much work! not to mention drywall dust everywhere!
Thank you! AND a skim coat?! You're much braver than I my friend 😂 I bet it'll look killer!
Danny, you are THE man!!! It really is easy, if you have patience and a little know how. I stumbled on your channel and showed my 12 year old son (we both agreed the editing and music are great). We are starting the garage reno next week and got some great ideas
From your video. God bless and keep makin videos please. Much like TV, TH-cam is quickly getting littered with trash.
Thanks a ton! So glad you both liked the video! Good luck with the garage - I'm sure it'll be awesome 💪
Thank you for the early reveal. Because of that I definitely will watch the rest of the video.
No problem! I’m not a big fan of the common TH-cam “hooks” either 😄. I appreciate it!
definitely one of those videos where you start at „ugh 15 minutes?! I’ll just skip trough it“ and end at „HOW THE HELL DID I JUST WATCH THE ENTIRE THING?“ haha! great job on the reno and the vid 👌🏻
Haha thanks so much! I was really surprised how much I had to speed up and cut out and still be 15 minutes 😩. I also found out getting the whole thing cut down under 1 minute for instagram was impossible 😂
I really enjoyed watching, can't wait for part 2. Those painting pads are fantastic, I have several rooms with feature colour on one wall and those pads are fantastic for neat corners and no messy bleeding edges. Brilliant video, keep up the great work. Consider me Subscriber 384... :)
The kind words and sub are much appreciated! 😊 That's a great use case - those pads are a game-changer!
@3:38 ☠️☠️ 😂😂 this made me laugh cause I’ve been there so many times with just enough material and cut it short
Haha it's the worst! My look of sheer defeat was very genuine 😂
Next project, Paint the floor with garage floor epoxy paint. You wont believe the difference, it really gives the garage a clean finished look! best of luck.
Thank you! Definitely keeping that in mind 👍
Should add some edge banding /trim to the front edge of the work surface. If it's all chewed up, you can cut a clean edge on it with your skill saw and just use a bunch of wood glue or construction adhesive. Would really polish the look.
Great callout! I agree, the top is a total eyesore. I never thought about cleaning the edge up with a saw 👏
Amazingly easy to watch . First time viewing you channel and do not know your professional background but you make a pleasent easy to follow , well done !!!! You are on your way especially shop nation ( engineer ) making a positive comments a bonus 😎
I appreciate the kind words, so glad you liked it! No background in the field; I am 100% a student of TH-cam University 😄
Bruh the level of quality and humor/entertainment is insane. Subscribed!
Really appreciate that!
Dude. Danny! Man, it has been a minute. I saw you post on FB and checked out your TH-cam. This video is so good! You're a natural. Can't wait to see more.
I hope all is well!
Ay man! I appreciate it! Didn’t know you had a channel either - really good stuff!
This was the first video of yours I watched. Awesome work. Makes me excited to get out and get mine done! 😅
Haha thanks so much for the watch! You got this 💪
I like the “face frames” for your work bench.
Thanks Doug! My original plan was to paint the whole thing, but when it dawned on me how quickly it’ll get beat up I changed my mind. I think I prefer this way anyway!
You could put some sort of protective sheeting under the cabinet and store your shop vac under there. Those are handy to keep close.
Not a bad plan my friend, thanks for the suggestion! I am certainly tired of tripping over the hoses 😄
Hell yeah. As for under the work bench... mini fridge, LEDs to see better, a stereo. Or like you said, drawers. Maybe leave room for a vice. Looks a lot better tho. Good job.
Thanks man! Mini fridge... now that’s a great idea 😁
Maybe a mini fridge would be a good addition to the empty spot in the middle of the work bench. Also, what soldering iron is that? Looks like it distributed solder out of the end making it very easy to do.
Good suggestion! I may have to do that. It’s a super cheap standard solder I’ve had for years. I just pre-soldered the cables to make it a little easier on me because I’m terrible 😅
I seriously cannot believe you only have 889 subscribers. Glad I found you this early. It's going to be fun watching your channel grow! Best of luck to you :)
Thanks Kyle! Really appreciate the kind words my friend!
Nice job. Looking for ideas for finishing my garage which is bare studs for the outer walls and got a number of them. The only thing I could suggest is the next time you paint the ceiling get the whitest high gloss paint you can find to increase the light in the garage.
Keep them project videos coming! Fantastically done!
bmxbang 7 Thank you my good man much appreciated! 😁
Absolutely awesome! I'm proud of you! You did a great job!
Thank you x100 :)
Nice work on your garage! Your project inspires me to take my own garage reno to the next level. Clever video transitions too 👍🏻
Thanks a ton Ethan!
Love the details in the video and the fact that you mess up shows you're just like anyone else. Not perfect! I just got a garage and this vid makes me feel more confident about doing it myself. Thanks!
Love to hear that - you got this! Mistakes are always made that’s for sure 😅 Thanks for watching!
Awesome-quality video !
Thank ya thank ya! 😄
This video was amazing! Not only did it look good, but it gave me a little bit of hope that I can learn how to do some of these things myself as well.
You got this! My secret recipe: Jump in, mess up (a lot) and try again until you get it right-ish :)
Hahaha that project creep is a real thing, and probably how most projects get started... "if I'm doing this, I might as well go ahead and do this..." lol! I'm a little embarrassed to say your "dirty" garage looks clean compared to our mess, but this is super inspiring! Great video quality/editing too!
Thank you! 🤗 It really is a good/bad situation. Good because it forces me to learn but at the same time I often bite off more than I can chew 😅 Honestly, the “before” was after about 12+ hours of cleaning. It was baaaad before-before haha.
Great job!! One thing, my OCD went crazy when the screw for the outlet cover wasn’t vertical or horizontal lol!!
Hey thanks! brb, grabbing a screwdriver... 😂
You asked for some ideas for under the Cabinets go with
Cubbies
And if you buy inexpensive Cubies from IKEA you can alternate the levels of shelves.
Immediately purchased those lights from your link! Just installed half of them today and it blew me away! Thanks for that man! Somehow I never saw these and they have stellar reviews!
I appreciate you using my link! Aren’t they amazing?! Haha, I couldn’t believe the difference they made. Really happy to hear they helped you out 👍🏻
That's a good garage cleanup - thanks for posting. A couple of corrections and tips to help yourself and others:
1) That "beam" @12:20 is a post. Posts go vertically, beams go horizontally.
2) That's not how you roll paint @11:45 lol! Use an extension handle on the roller, do NOT use the roller handle like you did. Your way is way harder on the back and legs squatting like that, puts your face close for paint droplets flicking off the roller, and most importantly, ensures uneven coverage of the paint on the wall. When you use an extension handle (eg 5') you stand back from the wall and use leverage to radically reduce the movement in your arms making for much easier rolling for much longer for much less effort. It also smooths out the paint with much more even pressure on the roller and gets you well away from the roller itself for less paint spatter AND you can gauge coverage more accurately.
3) When you roll, use a "W" or an "M" technique which also evens coverage and reduces banding.
4) FWIW, I would go draws under the bench with foam cutouts for tools.
5) A very cheap way to improve your concrete garage floor would be epoxy paint with flakes in it. Looks great, is very hard-wearing, and relatively easy to DIY.
6) For the LED lighting, I would make a small ceiling hole above the fitting and feed the joining cable between lights through that. Much neater and no cutting / re-joining with solder.
1. Good call out thanks for clarifying.
2/3. Agreed! My intention wasn't to provide a painting "tutorial" so I left out a few details. When I say "long, overlapping lines" - I do not lift the roller, result in long M's and W's. I prefer this to the common 'random' style because, for me at least; it lessens the chance directional variation in the finish. As far as extensions go - I couldn't use one in this particular spot because there is another wall directly behind me. I would have ended up with more holes to patch 😂
4. I'm diggin' this idea. That may be a winner 🤙
5. I've considered this a few times! Call me old fashioned but I actually prefer the raw concrete look, cracks and all 😀
6. That's another good one. I did later clean the cords up with cable clips and it doesn't look half bad!
I see you're a man of culture and use ryobi as well. Screw the haters! They have the most bang for your buck. Love the one+ line
Nicely made video and a great renovation project, you Sir have a new subscriber.
Thanks a ton George! I won't let you down! 😃
You did an amazing job! You certainly can be proud of your efforts! My garage needs your kind of help!
Thanks Jim much appreciated!
I don't have a garage but I do have work to do around the house. It is often hard to find motivation to do repairs and improvements, but watching this video helped
I love that thanks for sharing! I can say what I’ve found to helps me personally is the practice of “chunking” where I break a task into smaller parts so it doesn’t feel so overwhelming. So instead of thinking “I have this entire project/video to do this weekend”, instead I will just say “I’ll work on this for 30 minutes whether I want to or not”. Once I’m in it, I tend to get in the flow and work much longer.
Anyway I hope that helps and thanks for watching!
Nice titling blending into the video content! Nice space after the renovation! Very professional feel to the video editing. All the best, Rob in Switzerland.
Hey thanks Rob! I appreciate that
Nice Job! I would of painted that trim on the workbench though, since it looks unfinished to me.
I totally get that 🤙🏻I didn’t paint it because I felt the paint would have been tore up pretty quick and I planned on putting doors on it eventually as well. It’s kind of grown on me though!
@@ModernRemade okay that makes sense. Either way, looks good.
The Barinna lights are awesome. I just wish they made a corner connection piece.
I'm with ya there!
I need more videos!
Great voiceover /Music Mix, great camerawork and editing, keep making videos please
Very kind of you 🙌 Next one only a week or two away 😃
I like that you set the spiders free 👍
Gotta save our spider bros!
Nice video!
There are tons of these channels on TH-cam, but not many that say “I did this, but I messed up” That’s very inspiring to a (very) amateur DIYer!
Thanks Nick I appreciate the feedback!
Great video and great idea on the pole. Also liked the lights! Great video and checked out some of your other vids. Good Job and keep it up 🙂
Ayyy thank you! Really appreciate the kindness 🙏
Well, the new, more extended lighting fixtures make a huge difference!! Jumps right out, in opening pictures! 1) dust, patch and paint walls, ceiling. Corner protection. 1a) Killz products for primer. 1b) Repair windows, window trim. Door trim. Paint trim. 2) vacuum, sweep, leaf blower. 3) install new lighting. 4) remove item, sort, declutter and keep only what you truly need, use. 5) repair work bench and wood shelves. Set to height for storage bins. Paint. 6) pipe column.... paint it, or wrap for decoration. 7) upgrade door knob, lever style hardware. The end.
Awesome. Like the colour scheme.
Thanks Daniel! :)
LOL the "questions choices" moment got me. I do that all the time when I start to undertake a job I hate doing.
Haha! every.single.time.
Love this video! I'm currently working on a small outdated garage and found this super inspiring! NO JOKE on how terrible sanding is 😭😭😭 Glad you got through it, the results are wonderful :D
Haha thanks Rebekah I appreciate it! 🙏 good luck on the reno!
Wow, this is a terrific video. I'm excited to see more!
Thanks a ton, so glad you enjoyed it!
Me too. It’s nice to see someone else who thinks little details matter.
I honestly hit "Like" less than 3 minutes into the video just for liking your style... ;)
Can't wait to see what you do next. Good luck!
Thanks Adam, really appreciate those kind words!
I think some cabinet ambiance light, epoxy floor and wall or hide-o garage utility hoses (air,water,vac,power washer?), Some creative power tool storage and charging station for lights and power ools. Ryobi make a dope garage door opener that's modular taking the power tool battery and having accessories like air, fan, Bluetooth, WiFi, just out of my budget. I need a poor man's version of that. I have a 2 car garage with little to no room to work with and two giant garage queens
All great ideas thanks! 🙌 Epoxy floors have been one of my most requested. I may have to do that sometime soon! Otherwise, I'm 100% onboard with better storage and kind of where my heads at right now. Thanks Garrett!
Looks fabulous!!! I’m jealous you have empty space in your workbench!
Thanks Brittany!! Haha, Im starting to fill it up 😄
I'm way too damn lazy to manually sand. I just get a shitload of orbital sanding pads and switch them out. I of course attach the output into a Dust Deputy going into my vacuum with a vacuum bag. Works great and the Dust Deputy saves you a fortune on bags and filters.
I love how you’re funny, too!! There’s a really cool guy (I think his logo was Carma) that turned his garage into “showroom white!” He did the floors AND insulated the garage door and insulated the walls, added drywall and even put up an amazing air conditioning DIY kit. Pretty cool! Love the blue shelving btw!
Thanks Jay! That's super cool! Some of the garages I've seen on YT are mind-blowing. You may be interested in
@ABrazHouse. He built a whole studio and a freakin-attic lift; puts mine to shame! 😆
@@ModernRemade whoa really?? Checking it out now, thanks for the suggestion!! Btw the guy I was telling you about installed a split DIY mr. cool kit a/c unit that can be controlled with your phone!!
I can tell how much effort went into this video! Good job
Thanks so much I appreciate it! I surprised myself with how long this took 😅
like the cord around the post idea. 👍👍
Thank you! Also one of my favorite parts 😁
Well done video, your hard work paid off. It's a great space.
Thanks Elizabeth! Glad you liked it! 😀
Time for a garage floor epoxy video! I did mine. I could help you!!
Amazing work!
Thank you! 🙏
Nice outcome, and yes, I enjoyed the sense of humor.
Thanks for the feedback Lou!
My first video of yours. I've subscribed. I felt the issues that popped up on a personal level, lol. Nice transformation!
Thank you! I appreciate the sub! Oh man, I am definitely in the learning phase so those moments are more common than I'd like to admit 😅
@@ModernRemade We've all been there. If you need advice or anything I'd be happy to offer it. You've taken a step I've wanted to do for years, start a youtube channel, so I commend you there.
Just stumbled across your channel, great video and awesome quality. Looking forward to more!
Thank you very much! Just have to get to work 😅
Awesome job mate, thinking I need to redo my garage 🤔 🤔 🤔 🤔
Also loved the mistakes shown and your sense of humor toward it! good laughs
Appreciate the feedback! For your garage - you got this! One of my favorite renos to date for sure; so worth it.
The 550 cord was genius!
One of my favorite parts for sure!
where's the update?!? I went to look for more videos and I only see this one. you did a great job and I wanted to check out more from you
Thanks Ryan! Since it picked up in the past few weeks I’ve kicked it into gear for the next one. I am 90% done so it should be out this weekend 🤞🏻So glad you liked it!
Great video! Hope to see more content in the near future.
Thanks a lot!
If my garage looked as good as the one in your "BEFORE" version I'd go back inside, pop a beer, and put my feet up--a job well done! lol
A double video... Love it! You know we're junkie multitaskers!
Thank you!! RIGHT? If multitasking was illegal I'd be serving life 😂
Nice work!
Thanks Suzanne!! ✌️
Really enjoyed this! Easy sub! Not sure if there are others out there like me who would never do this but still enjoy watching!
Thank you Adam!! I'm a TH-cam-aholic so I can totally relate! 😄
I like the cord wrap idea on the metal posts 👍
Thanks Richard! One of my favorite parts as well!
Nice renovated garage. Under the workbench you can mounted tool cabinets with drawers.
Appreciate it!
Congratulations 12K view ..... l knew you make it 🤓 shop nation was right on .
😃 I've been really floored with the overall support. Thanks for rooting for me! 👊
You got what it takes calmness, humor accompanied with practical projects. Into today's world environment with uncertainty is a magnet thus keep at it and run with it 😊
Clean up!
Modern: Draws smiley face in the sheet rock dust, then vacuums it all up.
I was laughing.
Nice video man! Great work!
Thanks Ted!!
Looks great! I have been on my own garage quest for a couple of years and finally started a channel! Subscribed!
Hey thanks! Your garage looks awesome!
@@ModernRemade Thanks! Means alot coming from you! Did you find having an Instagram page helpful with growing your subscribers?
@@ABrazHouse Unfortunately not, my Instagram game is pretty weak 😅 Looks like only about 15 views came from there. Just about everything else came from TH-cam browse features 🤙
Nice job! Using your video and countless others as inspiration to update my garage. Thank you 🙏
Love that thanks David! Best wishes for your garage reno 🙌🏻
Very nice!! Love the color!
Thank you!
IDK why I waited so long to get a paint sprayer. We are in our second house now, and it needed to be remodeled bad, so I got a paint sprayer, and I am so happy I did. Makes painting so much easier and faster. I will be remodeling my new garage in the spring after I finish with the inside of the house
Yes! Total game-changer. Good luck on your renos!
That wasn’t that bad bro before, but it looks great now!
Much appreciated!
trying to close on our 1st and forever home...it has a 2 door garage with an office/mancave area that will eventually have a full bath...but 1st I got to paint and add spray foam insulation... thanks for the pole idea but will try to do 2 colors weaved together
Hey congrats! The pole was one of my favorite aspects of the reno, it looks really cool 🤙🏻 if you post yours online please shoot it my way I’d love to see it!
"Questions choices" is inevitable in any project. Love this video!
Thanks so much Danielle!
Some entertaining approaches to things. Glad you didn't get hurt. Now subscribed. Cheers.
Thanks for watching!
Looks really nice, way to go.
Thanks a ton!
Love the section title cards. Classy. Also, I’m inspired to try that work bench. Seems nice and clean.
Thank you!
4:01 Found another spider... Maybe this one is paying rent?
Good eye! 😂 You can see him just taunting me...
Great job
Thank you kindly!
Under 500 bucks. Great job and and an even better price. Gotta do mine.
Thanks Carlos! It was so worth it!
Nice video my man, let's see what else ya got! Johnny Builds is pretty rad, too.
Thanks man! Ya know, I actually _just_ subscribed to Johnny after seeing his castle joint bed video. Great stuff!
More videos! You are great!
Haha thanks! You are great! Next video is in the home stretch 😊
great video, definitely giving me ideas for my garage
Great to hear thank you!
Instead of wooden runners to protect the shelves, when we built shelves in my buddy's garage, we used a DIY bedliner kit to cover the shelves. It's a decent finish, it is super easy to clean, and wears extremely well.
That's super cool! I wouldn't have ever thought of that. I'll definitely be looking into that for future projects. Thanks for the tips!
Great job fixing up that bench, cleaned up nicely
I appreciate it! Was definitely worth it 🙌🏻
leave the empty space under the work bench and just add foot step for when you are sitting and working on a project you'll have space to tuck your feet in and be able to sit comfortably.
That's good thinkin! I don't have any place to sit now that I think of it 🤔