Is A Cheap Sonic Tester Worth It?
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Let's see how accurate a cheap ultrasonic thickness gauge is. ~ Earl
#nondestructivetesting #ultrasonic #cheap
CAMWAY Digital Ultrasonic Thickness Gauge Meter amzn.to/3QQUwsF
Wintact Digital Ultrasonic Thickness Gauge Tester Meter amzn.to/45dbGEV
Disclosure: The products listed above are listed using affiliate links. If you use these links, I receive a small percentage of your purchase value. It does not cost you anything extra and it helps to fund my channel. Thank You
I have the Benetech GM130 & I'm satisfied. 🤔😊
its not .006", or 6 thousandths off. It was a difference of .0016". The 6 at the end is ten thousandths and requires an outside micrometer with a veneer scale to measure. And I am betting that the dial "very near" calipers is the less accurate of the two. Wish that you would have used a true outside micrometer for the comparison.
is there a possibility to measure paint thickness on aluminium or steel ? For example to use to measure paint thickness on cars?
Are there minimum and maximum thicknesses that it will measure ? also i heard surface ruffness can facter in a bit ... tks fer the vid
I have heard the same thing. I think that it is rated up to 6" and I am not sure on the bottom end of the scale.
Will this work for testing cylinder head port thickness for porting?