@tsuyoi with just remark it is deep sounding, down pipe makes it sound a little tin like and honestly sounds not so good if you're on the side of the car lol. Can't go wrong with just the remark axle back, I only got the downpipe since it was actually functional for a bolt on performance mod
You need to remove as much as you can, the top heat shield, vband, and bolts and it will come out under the car. Its a very tight space since the cats are so huge.
Do you think Apexi mid pipe + PPE Catless would be raspy? Currently just running the Remark axle back and I love it but I've been considering the M-Force tune and want the car just a bit louder. Cant seem to find any clips with apexi mid pipe on the 200T either.
Yeah I think it would sound raspy. I had a full exhuast (PPE decat, invidia mid, and remark) and it sounded so bad IMO. The Apexi mid is basically a straight pipe. I'd assume with the PPE dp and Apexi mp, you'd need some mufflers lol.
Could you get some in car clips of Nicks car also just for reference of how they both some. I like both by the way. I have a 2017 200t and I’m looking for what set up I think sounds the best for myself
Im not sure about catted. but catless people like myself need to run the o2 sensor spacer to prevent it from coming on. The spacer is like $10 so it doesnt hurt to put it on the sensor
It is a starlight headliner I did. I did it myself and made a video if you want to check out my other uploads. I bought the stuff off amazon and it is in the description of the starlight video here. th-cam.com/video/UIqCrnmrllo/w-d-xo.html
I have catless and you can smell it standing next to the car or driving with windows down. I haven’t heard the catted ones but I’m sure it’s a little quieter and not smelly lol...also the price for catted is crazy high.
Were you not having issues with a exhaust leak from the down pipe and the midpipe? Because I been having one since I installed both tried different spacers and gaskets
Hi, i have lexus RC200T with catless downpipe + ecu remap+ stock midpipe + Invidia Q300 Axleback and drones a lot...Any suggestions for killing drone???
I didn’t make a video, i did it before i started TH-cam. You need to unplug the O2 sensor wires, move the turbo valve regulator, to reach down and remove the v-clamp band which i believe had a 10mm on the bottom side of the clamp. Then under the car you want to get the midpipe out the way bc the downpipe slides down and out but it will get caught on the tunnel bc of the heat shields, you can try to bend the shield in so it won’t get caught on the way out. Then you can swap over the o2 sensors and install downpipe reverse order. It took me 4 hours.
@@Blue_3is yeah, that way you can reach in and undo the heat shield from the top and have more wiggle room to get it out. For the o2 sensors yeah you need to swap them over, youll get a check engine light if not. You can rent the tool to remove the sensors at any auto parts store.
Hey Kenny! Is there a chance you could list out the parts and where you got them from? The part where your friend have and you have in your cars for the exhausts.
Hey Kevin, I have it listed in the description. The places I bought them at are sold out on their website but they are other vendors that carry them for different prices online!
Hey there brother, question, does your car still have that delay in acceleration from a stop after the mods. Any noticeable gains in performance from the pipes?
Yeah the 200t throttle lag is terrible, the downpipe helps it a little bit. The most performance gains you’ll get from bolt on is a downpipe but it’s not drastic unless you have an ECU tune
you all prolly dont give a damn but does anybody know a way to get back into an Instagram account?? I was dumb lost the account password. I love any tricks you can offer me!
@Rex Dominic thanks for your reply. I got to the site thru google and Im in the hacking process atm. I see it takes a while so I will reply here later when my account password hopefully is recovered.
Damn I wish I can figure out how to make mine crackle like a AMG Edit: might have to just save money and throw a small block 350 with headers to make it loud cause why not if I can’t make the 2.0T crackle.
@@lancestrong4772 for sure bro. Might have to get some headers made. Watched a guy do custom fab for a CLA benz and he put headers and it helped with the crackle. But I’ll let you know.
It’s a huge difference I think it sounds better with mid pipe and remark because just remark or any axle on the 200t sounds like a vacuum like it’s restricted
@@KennyVo Nice, cause I just bought the remark axleback and the only thing holding me back from getting the invidia midpipe is not knowing how the drone will be. How bad is it? Is it bearable at least or?
how hard was it to install the downpipe? I got mine in yesterday and I’m gonna do it tomorrow at work lol, I have access to a lift everything so it shouldn’t be to difficult I hope 🤞🏽
It’s a pretty tight area to work with lol getting the stock one out sucks cause the cats are fat and the heat shields on it catches on other things on the way out. Getting the new one on is easy!
Got it on ebay. O:riginally carbon fiber, but I paint matched it when the clear coat got all messed up. Heres the link www.ebay.com/itm/Fit-14-18-IS300-IS350-DuckBill-Highkick-Carbon-Fiber-Rear-Trunk-Wing-Spoiler/223720051435?fits=Make%3ALexus&_trkparms=ispr%3D1&hash=item3416c112eb:g:ajUAAOSw7q5dsodm&amdata=enc%3AAQAFAAACgBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickkgCVySCgrNFPU8Iu85TabMA%252Ba%252BXqoShV74IJQnH4DBdfbVrZufH0EzgmmlEk%252Fq55UJvAXOIWHSQ8TG78aeCG0Xz%252FHaTXNoI44GnX%252FCorauA%252Bd7bylV5d1FaGRl%252Ft93jZjUF58bSlFhFPkAZLUJU4CGcjrSx9s%252FYNqt0uL1dWxv8fJDVcjzhcYKeItXBLf%252FPTkeoPO7Tx16an8EZ%252Be4JgZUBgWSFtVde09btMVUs6TQpxQTKgdXOrbh25HMIe2BPmUUoy5kis9GrPvvOPfa7qvA6jR%252Bu%252FKr89RnyiipVCK9n56srp%252Bq4MuH85ZxbaP6MyMmiT7OA7er6wg5l97PEZYhd3CSBpM%252Bo%252FDi2NfYkReCo4zftg8pwHwwJ3nlTsVhSdAuusyLodBgdM%252B%252FLovRNKo35FxGJecKhSfV9TalJbo3LxlrK3IYDBBXD9Yt8JXwA5UeIFwkCR1tiYrrPpMzIkf%252FKT54SGCZfauWXEn1xh5f%252BTz1R0XPLWjPypWPJ0%252FwH72j%252FaUa8x4sLFDCnN5Qyjr0voZ2B5uoALvK9gMbz9Xn%252FevuGMsbXlipzhLejvsN7MlbTFzVT3RNlYAaODzLsoQnqqkCDH2e94cgDoGt9PfGDWy1KU4tj6SFqTgrr4Ry78BXMZ6Hs1gmml1S1XOilB0Tynv6UgWPYMWeR1oKbXjz8CpV%252Fnq%252FEO8KjkgAtRoNDPse5Jaxq7CUUysGSvi2dzIRD%252FKfP3DiJC13srvLkkiJIcQ5zEA5EC3t6P0xBBMTHjCKg5nAMyd4PS%252BHLWF67rzf%252Fs%252FiToLx%252Fv4QkPIMj2PEo0%253D%7Ccksum%3A223720051435fdf42af3607740ecb28e3cf989c92ce1%7Campid%3APL_CLK%7Cclp%3A2334524
I live in Texas and the place I go doesn't use the "sniffer". I also have my heat shield covering my downpipe and no CEL so it passes "visually" and through the OBD.
Do you have a video of what your car sounded like when you hae the PPE downpipe with the invidia mid pipe and remark axle back?
OOOOF I have it on my phone, i can send it to you if you shoot me a message!
That car is nice dude! I am picking up my new 2017 lexus IS200t tomorrow non fsport, after upgrading from my other modded prius. LOL
Good choice! it will be a fun ride!
wow the midpipe sounds so good !
Yeah from outside it sounds good but it drones pretty bad
@tsuyoi correct, I daily mine and its fine. The only complaint is the fumes/smell since the downpipe is catless.
@tsuyoi with just remark it is deep sounding, down pipe makes it sound a little tin like and honestly sounds not so good if you're on the side of the car lol. Can't go wrong with just the remark axle back, I only got the downpipe since it was actually functional for a bolt on performance mod
That’s what she said
@@KennyVo and there is there any pops with just the remark axelback? been trying to find a exhaust set up for the 200t that pops
How do you get the cat off I’m having trouble removing mine to put my ppe downpipe on
You need to remove as much as you can, the top heat shield, vband, and bolts and it will come out under the car. Its a very tight space since the cats are so huge.
Sounds good! What spacers do you have for those stock wheels?
Thanks! I ran 20mm spacers, this is the exact one amzn.to/3YPI6BF
I’m trying to get a full exhaust for my IS200t what exactly do you have on yours I like how it sounds
Hey It’s a PPE engineering catless down pipe, stock mid, and remark axle back. I had the mid pipe on but it was way too loud and raspy.
Do you think Apexi mid pipe + PPE Catless would be raspy? Currently just running the Remark axle back and I love it but I've been considering the M-Force tune and want the car just a bit louder. Cant seem to find any clips with apexi mid pipe on the 200T either.
Yeah I think it would sound raspy. I had a full exhuast (PPE decat, invidia mid, and remark) and it sounded so bad IMO. The Apexi mid is basically a straight pipe. I'd assume with the PPE dp and Apexi mp, you'd need some mufflers lol.
Could you get some in car clips of Nicks car also just for reference of how they both some. I like both by the way. I have a 2017 200t and I’m looking for what set up I think sounds the best for myself
For sure, I can tell you his is more drony in cabin but i can shoot you a video of it on IG DM me or I can DM you. @texus3is
2:10 I want that license plate frame! 🔥
sheeshhh its from Never Content
@@KennyVo yea I already have one lol thanks for responding tho!🙌
Hi Kenny, will I get check engine light always come on when install 200cell catted downpipe (not catless) ??
Im not sure about catted. but catless people like myself need to run the o2 sensor spacer to prevent it from coming on. The spacer is like $10 so it doesnt hurt to put it on the sensor
How did you get your interior ceiling to look like that? Can you show me what you did what you bought and where you bought it?
It is a starlight headliner I did. I did it myself and made a video if you want to check out my other uploads. I bought the stuff off amazon and it is in the description of the starlight video here. th-cam.com/video/UIqCrnmrllo/w-d-xo.html
Idk much about cars but which exhaust sounds better? The white one or the grey one isn’t it deeper? Love both though!
White car is deeper
Do you recommend catted or catless dp? Like from the sound and smell
I have catless and you can smell it standing next to the car or driving with windows down. I haven’t heard the catted ones but I’m sure it’s a little quieter and not smelly lol...also the price for catted is crazy high.
Were you not having issues with a exhaust leak from the down pipe and the midpipe? Because I been having one since I installed both tried different spacers and gaskets
I did have the problem I bought 2.75” and 3” gaskets to fix it and I forgot which one is on now but there’s no leak anymore
Hi, i have lexus RC200T with catless downpipe + ecu remap+ stock midpipe + Invidia Q300 Axleback and drones a lot...Any suggestions for killing drone???
I know people usually add vibrant resonators to reduce drone
I really like your setup but quick question
do you have any clip that how sound with no downpipe and the stock mufflers ??
Stock? lol i dont have a clip but it sounds like a vacuum
@@KennyVo my idea is just to get the donwpipe and keep it oe☠️
Kenny what kind of diffuser is that, looks sick. Would mind dropping the link in the comment?
On the silver IS, it's stock and on the white IS its a 2017 OEM diffuser with rear spat and diffuser add on. All available on lexuscarbonfiber.com/
Did you did a video on the Downpipe install? I just got mine, and I want to know what I have to remove to get it out, and how bad the install is?
I didn’t make a video, i did it before i started TH-cam. You need to unplug the O2 sensor wires, move the turbo valve regulator, to reach down and remove the v-clamp band which i believe had a 10mm on the bottom side of the clamp. Then under the car you want to get the midpipe out the way bc the downpipe slides down and out but it will get caught on the tunnel bc of the heat shields, you can try to bend the shield in so it won’t get caught on the way out. Then you can swap over the o2 sensors and install downpipe reverse order. It took me 4 hours.
@@KennyVo do I need to remove the turbo muffler to remove the downpipe’s heat shield?
@@KennyVo Do I have to install my o2 sensors on the new one? It came with the two holes plugged.
@@Blue_3is yeah, that way you can reach in and undo the heat shield from the top and have more wiggle room to get it out. For the o2 sensors yeah you need to swap them over, youll get a check engine light if not. You can rent the tool to remove the sensors at any auto parts store.
@@KennyVothank you boss! 🔥
Hey Kenny!
Is there a chance you could list out the parts and where you got them from? The part where your friend have and you have in your cars for the exhausts.
Hey Kevin, I have it listed in the description. The places I bought them at are sold out on their website but they are other vendors that carry them for different prices online!
Did you have to adjust any ECU files when you changed the DownPipe and headers
I have a 2016
Nope didn’t have to it’ll perform it’s best with a tune but it runs perfectly fine without. Turbo motors use down pipes and the 250/350 uses headers.
Is the invidia mid pipe the same as a resonator delete?
pretty much, and bigger diameter pipe
interested in getting an exhaust for my car. do you have recommendations for ones that you think sound good but aren't toooo loud?
Remark axle back or just a muffler delete. Practically the same thing except remark has tips.
Nice 👍 video that exhaust remark is from 17 - 20 right right
Yes correct, it can fit 14-16 if you swap your diffuser that is compatible for quad exhaust.
Good stuff! How did you get your headlights to be black?
Thanks! Mine are still stock lol, the blue car has tint over the headlights.
does a 2016 is200t have a invidia q300 catback i only see axle backs im dying to get my hands on a catback for my lexus..
A catback for the 200t would be a midpipe and axleback since the primary cats are in the downpipe
@@KennyVo do you have a link you can send me please to both?
I have an ark exhaust, you think switching to a invidia midpipe will make it louder?
I’ve seen videos on Ark mid pipe and axle on the 200t and invidia mid and axle, Invidia sounds more throaty and louder than ark
Hey there brother, question, does your car still have that delay in acceleration from a stop after the mods. Any noticeable gains in performance from the pipes?
Yeah the 200t throttle lag is terrible, the downpipe helps it a little bit. The most performance gains you’ll get from bolt on is a downpipe but it’s not drastic unless you have an ECU tune
@@KennyVo can we get a view underneath the car of the set up?
Can you guys provide me with the size and offset on the avant garde m520r wheels please for front and rear and tire size used, thanks
you all prolly dont give a damn but does anybody know a way to get back into an Instagram account??
I was dumb lost the account password. I love any tricks you can offer me!
@Avery Randy Instablaster ;)
@Rex Dominic thanks for your reply. I got to the site thru google and Im in the hacking process atm.
I see it takes a while so I will reply here later when my account password hopefully is recovered.
@Rex Dominic it did the trick and I now got access to my account again. Im so happy:D
Thank you so much you really help me out!
@Avery Randy No problem :D
What are the wheels on the white Lexus ? It looks soo good😍
They're Avant Garde wheels he is selling them lol
@@KennyVo does he still have the rims ?
@@ninasuniga8728 sollddddd to texus.lexus , buy it off him lollll
Damn I wish I can figure out how to make mine crackle like a AMG
Edit: might have to just save money and throw a small block 350 with headers to make it loud cause why not if I can’t make the 2.0T crackle.
Bro I have an is 200t as well let me know if you ever get it
@@lancestrong4772 for sure bro. Might have to get some headers made. Watched a guy do custom fab for a CLA benz and he put headers and it helped with the crackle. But I’ll let you know.
th-cam.com/video/lQ4nwszupR0/w-d-xo.html tune for it :)
th-cam.com/video/lQ4nwszupR0/w-d-xo.html tune for it now :)
Can you give us an update on how you feel about the aftermarket screen?
Sure thing!
I'd honestly take the 200t over the lame ass 250 any day. I'm glad they dropped it for the 2017+ models
So at the end of the day, which one you like more invidia or remark?? Both sounds great but is not the same listening live
That’s a WAP 😂❤️
Yerrrrrr
Sup bro, how much more of a sound difference is the white car with just the remark axleback vs with the invidia midpipe?
It’s a huge difference I think it sounds better with mid pipe and remark because just remark or any axle on the 200t sounds like a vacuum like it’s restricted
@@KennyVo Nice, cause I just bought the remark axleback and the only thing holding me back from getting the invidia midpipe is not knowing how the drone will be. How bad is it? Is it bearable at least or?
@@franzsantiago9101 it has a lot of drone for sure, anytime I ride with him and other passengers everyone mentions it 😂
@@KennyVo aw fuck okay thank man 😂 been a fan of your page since your first video
Where did you get the license plate frame from ?
Nevercontent on Instagram
@@kennymanalo4484 this Kenny is correct
how hard was it to install the downpipe? I got mine in yesterday and I’m gonna do it tomorrow at work lol, I have access to a lift everything so it shouldn’t be to difficult I hope 🤞🏽
It’s a pretty tight area to work with lol getting the stock one out sucks cause the cats are fat and the heat shields on it catches on other things on the way out. Getting the new one on is easy!
@@KennyVo sounds good, thanks brodie 🦾
@@KennyVo took like 4-5 hours lol shit was tedious as fuck lol it was worth it tho 🦾
@@jflexiko haha yeah thats around how long it took me. Nice you got it done!
where’d you get that reflector light on the bottom bumper
from here amzn.to/3wZeOVa
Did you get a check engine light after the ppe downpipe?
I did but you just need the o2 sensor spacer and that fixes it. Hasn't came on since.
How did you get the car to hit redline while still?
First few revs it limits at 4k but if you keep going it will let you hit redline
Yo man I have the same setup but how did you get it to pop while driving? I can only get it to pop when I rev it at 6k+ rpms lol
Neat! I shift it at redline, traction off and “manual”. That’ll let you rev it up all the way and bang the redline without auto upshifting
could their jacks not jack the car any higher? why not just drive it on the edge of the sidewalk to have more room?
it can go higher, the pavement is at an angle so didnt want to increase the chances of it sliding off.
What set of lowering spring do u have on ur car?
RSR super down
Does 200t sound like the is 300 with silver setup?
pretty similar the white one is more louder and more consistent burbles.
Did you guys both have Res delete on your set ups?
No, just bolt ons
Quick question bro where did he find those fog lights for that year ?
He did some custom work to make them
how much of increase did you get with the bolt ons?
Haven't tested, you wont get much out of the bolt ons. The downpipe is the most you'd be able to push for a bolt on.
what year is your 200t ? i don't have that GPS map.
2016 I upgraded the screen, I have video on it
what wheels and fitment specs are the ones on the 300? (nicks)
I know they're Avant Garde 19s, not sure of the width and offset but you can DM him
i have stock mid pipe and i did a muffler delete
nice!
Do you have by any chance a link for the parts ?
They’re out of stock on most websites/discontinued, also the remark is back ordered. You can find it on eBay or other websites
Do u have the part # for that invidia midpipe? thanks
You can just search Invidia mid pipe is200t on google, but here it is HS15LI2MIP for the 2.0t
Where did you get your wing
Got it on ebay. O:riginally carbon fiber, but I paint matched it when the clear coat got all messed up. Heres the link
www.ebay.com/itm/Fit-14-18-IS300-IS350-DuckBill-Highkick-Carbon-Fiber-Rear-Trunk-Wing-Spoiler/223720051435?fits=Make%3ALexus&_trkparms=ispr%3D1&hash=item3416c112eb:g:ajUAAOSw7q5dsodm&amdata=enc%3AAQAFAAACgBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickkgCVySCgrNFPU8Iu85TabMA%252Ba%252BXqoShV74IJQnH4DBdfbVrZufH0EzgmmlEk%252Fq55UJvAXOIWHSQ8TG78aeCG0Xz%252FHaTXNoI44GnX%252FCorauA%252Bd7bylV5d1FaGRl%252Ft93jZjUF58bSlFhFPkAZLUJU4CGcjrSx9s%252FYNqt0uL1dWxv8fJDVcjzhcYKeItXBLf%252FPTkeoPO7Tx16an8EZ%252Be4JgZUBgWSFtVde09btMVUs6TQpxQTKgdXOrbh25HMIe2BPmUUoy5kis9GrPvvOPfa7qvA6jR%252Bu%252FKr89RnyiipVCK9n56srp%252Bq4MuH85ZxbaP6MyMmiT7OA7er6wg5l97PEZYhd3CSBpM%252Bo%252FDi2NfYkReCo4zftg8pwHwwJ3nlTsVhSdAuusyLodBgdM%252B%252FLovRNKo35FxGJecKhSfV9TalJbo3LxlrK3IYDBBXD9Yt8JXwA5UeIFwkCR1tiYrrPpMzIkf%252FKT54SGCZfauWXEn1xh5f%252BTz1R0XPLWjPypWPJ0%252FwH72j%252FaUa8x4sLFDCnN5Qyjr0voZ2B5uoALvK9gMbz9Xn%252FevuGMsbXlipzhLejvsN7MlbTFzVT3RNlYAaODzLsoQnqqkCDH2e94cgDoGt9PfGDWy1KU4tj6SFqTgrr4Ry78BXMZ6Hs1gmml1S1XOilB0Tynv6UgWPYMWeR1oKbXjz8CpV%252Fnq%252FEO8KjkgAtRoNDPse5Jaxq7CUUysGSvi2dzIRD%252FKfP3DiJC13srvLkkiJIcQ5zEA5EC3t6P0xBBMTHjCKg5nAMyd4PS%252BHLWF67rzf%252Fs%252FiToLx%252Fv4QkPIMj2PEo0%253D%7Ccksum%3A223720051435fdf42af3607740ecb28e3cf989c92ce1%7Campid%3APL_CLK%7Cclp%3A2334524
Do you have Apple carplay in your Lexus?
I do there’s a video on my channel over it
Do you have time/chip?
During this video no, I previously had jb4 piggy back tune and now on mforce tune
Ayee I know that parking garage haha g shit, small world
Ayeee haha
Stock tune and no check engine light?
Yes, the only reason a code would throw on my car is the o2 sensor but I have an o2 sensor L shaped spacer on it so there’s no light.
@@KennyVo ah ok so a defouler did the job. Not always the case. But good to hear. Thanks!
Does your PPE decatted down pipe pass smog?
I live in Texas and the place I go doesn't use the "sniffer". I also have my heat shield covering my downpipe and no CEL so it passes "visually" and through the OBD.
What spacer are you using on downpipe?
what year the is 300?
2018
is it pretty loud?
I think Nick set up is louder than mine but either sounds pretty good to me. The 200t is pretty quiet with just an axle back
The only thing that sucks is that the 200t even with turbo is slow. IS350 is way faster
yupppppppppppp
Why no intakes?
we both have intakes.
@@KennyVo oh I found out after looking through ur other videos. Ur exhaust must be loud!
It’s sounds the same, like mine
NEAT!
WHOSE HOUSE
ayee haha COOGS HOUSE
You can definitely tell the 200t is a 4 cylinder lol. The V6 sounds so much better.
god damn ya ruined a nice car.
oops