Thank you so much for this informative video! I was able to watch and then do accidentally to my blower. My carburetor was in worse shape but now it runs great!!
I certainly understand that. Seems like equipment likes to grow legs when you let people “borrow”. I was pretty impressed with this machine though. Pretty beefy and good air flow.
Nice informative Video. I have same problem with my Poulan Pro model 210 and I will try to clean the carburetor like you did to see it will run without stopping.
The thing most people miss is the pressure in the gas tank won’t let gas flow properly. Some have a third hose it not it has a small valve in the screw cap on the tank. Make sure they are not blocked can check it out by loosing the gas cap and cranking it or revving it up.
Right!! Can’t even work when your hands get too cold. I’m still trying to figure everything out for the shop. Not sure how much heat I’ll have this year but trying to figure it out. Hope you are staying warm :)
I have one of these, i installed new primer bulb, ignition coil, didn't have spark, now I do, pulled piston, cleaned ring and ring groove, reassembled, have gas and see it flowing thur both hoses, all gaskets good, has spark, put starter fluid in spark plug hole, wont fire still? Could it be a compression issue? What should compression be? 100 psi? I Have not checked compression yet. It just doesnt seem like it wants to pop
Nice save there Alex. Doesnt help when theres no air filter and the fuel filter is disconnected. Lots of gunk in the screen on that carb. Runs really well now Sir! I noticed your sticker board and it looks like you did what i did by buying a magnetic erase board.👍🇺🇸Roger
Thank you Roger. Yea they really did a number one this one running it without filters. Yea I thought it would be fun to have the board for stickers and shout out if I want to write on it as well. I got your stickers in the mail today as a matter of fact. I’ll make sure to get you some out, and have yours up very soon 🙏
Yea I wanted to roll the dice and see if I could. Not really worth spending a lot on these units with the resale being low. Hope all is well your way 🤘
@@freedommowers420 it is . I went outside today and flim a video on that kohler xt675 engine . I am uploading now and found out what is going on with this engine and what I am going to do from there.
OK Look at the 2 diaphragms. Metering and pumping. Replace the purge blub (primer). Clean that screen with carb cleaner. Check to see if fuel disappears. Pumping diaphragms are cheap and easy to buy. I would have purchased a rebuild kit if available.
I took a peak at the arrestor screen on it today actually. It was very oily but not clogged. I think the previous owner was running a very rich mixture in there. I got it dialed in at the end of the video and seems to be running great. Hope all is well your way.
I am getting one brand new at 🚜 supply with the one year protection plan so I could run it over bring it back with proof of purchase and get another one 😂😆
Thank you so much for this informative video! I was able to watch and then do accidentally to my blower. My carburetor was in worse shape but now it runs great!!
Just found one of these out for trash and going to try to get it started. Hope its an easy fix like yours
I love your shop 💡
Thank you 🙏
I love the go too knife.
Very lucky to have it fixed, I just did all that to bve200 and still doesn't idle 🤷 going to order an after market carburetor and see what happens
Yes sometimes this works, and other times it needs a new carb if it’s bad enough. I hope you can get it changed out and running good.
2 Strokes are not my friends 🤭. I had one of these and man I was totally impressed let a friend use it and never saw it again 😡
I certainly understand that. Seems like equipment likes to grow legs when you let people “borrow”. I was pretty impressed with this machine though. Pretty beefy and good air flow.
Good job and nice video Alex, that screen was pretty dang packed. She's a blowing now!! 🙂👍🏼
Yessir. Shows what those fuel filters keep out. Thank you for always showing the love 💪
Anytime brother, I do it for those I like.... and YOU too!! 🤣🤣🤣
Nice informative Video. I have same problem with my Poulan Pro model 210 and I will try to clean the carburetor like you did to see it will run without stopping.
The thing most people miss is the pressure in the gas tank won’t let gas flow properly. Some have a third hose it not it has a small valve in the screw cap on the tank. Make sure they are not blocked can check it out by loosing the gas cap and cranking it or revving it up.
Yes they have to be able to vent. Some have it on the cap and others have the third hose with the valve. Thank you for stopping by and the tips 🙌
Good one Alex. No money invested. Around here that's a 40 or 50 dollar bill. I know all all to well about the cold hands. Try to keep warm brother!!!
Right!! Can’t even work when your hands get too cold. I’m still trying to figure everything out for the shop. Not sure how much heat I’ll have this year but trying to figure it out. Hope you are staying warm :)
Thanks for the sharing beautiful video with us, have a good day, New friend, Like 17
Good job on the video ! 👍
Thank you very much.
I have one of these, i installed new primer bulb, ignition coil, didn't have spark, now I do, pulled piston, cleaned ring and ring groove, reassembled, have gas and see it flowing thur both hoses, all gaskets good, has spark, put starter fluid in spark plug hole, wont fire still? Could it be a compression issue? What should compression be? 100 psi? I Have not checked compression yet.
It just doesnt seem like it wants to pop
Another great find
Glad you enjoyed it
Nice save there Alex. Doesnt help when theres no air filter and the fuel filter is disconnected. Lots of gunk in the screen on that carb. Runs really well now Sir! I noticed your sticker board and it looks like you did what i did by buying a magnetic erase board.👍🇺🇸Roger
Thank you Roger. Yea they really did a number one this one running it without filters. Yea I thought it would be fun to have the board for stickers and shout out if I want to write on it as well. I got your stickers in the mail today as a matter of fact. I’ll make sure to get you some out, and have yours up very soon 🙏
Great video brother . Didn't have to swap a carb out on it
Yea I wanted to roll the dice and see if I could. Not really worth spending a lot on these units with the resale being low. Hope all is well your way 🤘
@@freedommowers420 it is . I went outside today and flim a video on that kohler xt675 engine . I am uploading now and found out what is going on with this engine and what I am going to do from there.
@@Turningwrenches85 looking forward to seeing what you found.
Magnific 👍
OK Look at the 2 diaphragms. Metering and pumping. Replace the purge blub (primer). Clean that screen with carb cleaner. Check to see if fuel disappears. Pumping diaphragms are cheap and easy to buy. I would have purchased a rebuild kit if available.
That’s usually what I do with most of of the machines that come through here. Thank you for the tips and support.
The other problem is the spark arrestor screen might be clogged up.with carbon I still have to do the repairs on the two hand held blowers I was given
I took a peak at the arrestor screen on it today actually. It was very oily but not clogged. I think the previous owner was running a very rich mixture in there. I got it dialed in at the end of the video and seems to be running great. Hope all is well your way.
@@freedommowers420 okay thanks for your reply young man 😎
Would just adding more gas help?? It looks like you are almost empty.
I am getting one brand new at 🚜 supply with the one year protection plan so I could run it over bring it back with proof of purchase and get another one 😂😆
I don’t blame you one bit. It’s nice to have that protection plan to get a new one if needed. Thank you for stopping by and showing support 😎