Man they keep the old girl looking good. Inside and out. Draglines are way cool. Makes those little 3/4 yard machines I used to operate look very insignificant. Thanks Aaron for doing what you do. For an old gear head it's fun to watch. Cheers
I have made the cages housing the brake rotors you see in 7:29 and it's cnc milled then welded together and bolted to the hub. Also the rotors are 2m in diameter and weigh just under 100kg.
Awesome video. As a retired heavy equipment operator i don't think i would last long doing that unless the pay was real good. After running a excavator for years loading on and off road trucks this would make my brain rot fast .The boredom is hard to overcome. And the machine actually runs on coal , because without coal .... theres no electricity.
I know a couple people that have run the big haul trucks in the Kennecott copper mine and they say it's awesome for about the first week then it's just mind numbing repetition.
I find it therapeutic, I’m only 19 and I can shut my brain off and haul earth, granted I’m allowed to listen to music or podcast so that makes it easier.
@@ryanc8188I live right under Kennecott, run equipment doing dirt work and developments, it gets old quick no matter how big they are. And I grew up running equipment
Indeed, I quit cnc operations for same reason. Most boring job ever just watching it work all day twiddling my thumbs and looking at clock every 15 min hoping an hour had passed.
1:54 That machine is 106 days short of operating 10,000 days. The most custom piece besides the bucket is the drive gear. I wonder how many individual sections it was cast in and if any of the sections of drive gear have been replaced.
@@tristenklein225 not sure about the dragline. I’ve built rope shovels it takes about 3 months to finish a Bucyrus 495HR2 rope shovel. So I’ll assume the dragline might be 6 months or more depending with the location where you build it.
Two years ago they replaced the tub on this exact dragline I believe. If not this one it was one of the other two at this same mine. th-cam.com/video/ACrTGwEqxHQ/w-d-xo.htmlsi=4TofasCwqrvmAsyQ
Big Muskie should never have been cut up for scrap because it was a true one off never to be built again, sounds sad but watching the videos of it being cut up was upsetting because the world will never see another one.
@@theunemployedtrucker I'm the same way. I have only seen videos of the machine, but when they blasted the A-frame off of it, and the boom fell to the ground, ruined, it was a might saddening to me. I have loved machinery like it, since I was a toddler. Some might consider me a nut, but that's the way I am.
@@wmden1 I was able to visit the resting place of the Big Muskies bucket…defies description! Can you tell me if the Big Muskie was larger than this machine? If so, by how much. Thanks.
@@WDFJR16345 I believe the narrator said the bucket of this machine holds 104 cubic yards. From what I have seen and heard on videos of it, The Big Muskie bucket held 225 cubic yards. That is over twice the capacity of this machine here. I believe the Big Muskie was said to weigh 26 million pounds total, and was significantly larger than this dragline. That's about all I can tell you and be pretty sure about it.
This is such a cool video. I worked for a heavy engineering company in Australia in the 70's called Perry Engineering. I operated a Skoda horizontal floor borer that machined the gear boxes and swing shafts for draglines.
Awesome video brought back alot of good memories i got to run a drag line half that size at a limestone quarry in central Illinois that my dad worked at when i was a freshman in highschool it was an awesome experience
Great Video!... My Grandfather on my Daddy's Side of the Family worked for a Company here in Pennsylvania called Highway Equipment... Before he passed away back in the late 1970's, He worked on Big Bucyrus Erie Machinery... He also had a Weld Shop... The sheer size of some of those Old Shovels and Draglines is just totally overwhelming!... This Kid does a good Job with these Videos... I enjoy watching this stuff... I've been in Heavy Equipment Business my entire life... Over 32 years, I'm pushing 50 now... And I learn something new every day about this type of stuff.... Like I said, Great Video!...
I was lucky enough to not only get to see one of these in person but the guy knew the driver so he stopped the machine and let us onboard. The sensation of being in the cab while its swinging around and throwing its bucket is wild. So much weight
Well you sort of got one thing wrong. I guess they didn't tell you, that if you were standing on the very end of the boom, when its swinging you'd be travelling between 60 - 80 miles per hour !!! Thats pretty damn fast for an earth moving machine!
@@joshkuhn3974 oh yes that would be right. I'm Canadian and it's 60-80 km/hr. They tested the ones up at Syncrude back when they had them. It's still pretty darn fast!
My father ran a drainage earth moving business and operated draglines, not like the size of this beauty of course. A dragline was one of the most difficult earth moving machines I've ever had to learn how to operate, my father could make a dragline sing, they were an awesome machine in there day and still have there uses even today. Cheers for the great reel.
Hello i'm from the biggest production indonesian coal mining " berau coal ". I always watch your videos and fantastic experience about coal mining in the europe one day i would like to works there are
Well thank you for this video. For many years my Company (Monitek) performed vibration analysis on these machines in coal mines throughout Australia, the purpose being to detect the early warning signs of wear (defects) in the many large bearings and gears driving them, thus allowing corrective maintenance to be performed before a catastrophic and very expensive failure occured. One of our employees later emigrated to the USA and set up a sister company in Wyoming to service the coal mines in the region. Never thought I would see this sort of detail on TH-cam.
I run a power plant and monitor our 3 wind farms. Yeah the wind doesn’t blow all the time. Especially on the coldest of nights. No wind no power. I’m grateful for the coal and natural gas power generation! My hats off to those who work in that cold up north.
@@titaniummechanism3214 Yeah... I think the OP may be tilting at windmills. (Almost literally: they kinda teed that up, eh?) Energy is energy, and, sure, there is the intermittancy issue with wind, but there are solutions like pumped hydro, etc for that. Installed wind power is already less expensive than any source other than, in some marginal situations, natural gas or coal- and the gap is closing fast! (It would already be closed except for the absurdly massive fossil fuel incentives, favroable interest rates, tax breaks, and immunity for the environmental damage they cause, etc, etc.)
Thanks for the video. Interesting! Three other questions: 1) Do the booms move? 2) how much does this machine weigh? 3) How much does this machine cost?
Back in the late '60's we were fishing near the open pit coal mines around Wilmington IL. There was an immense dragline there, and we were invited to tour the machine. My father drove our Plymouth station wagon into the scoop of the dragline and there was enough room for another station wagon next to our car.
What a remarkable machine! Its crazy that at the make of this video this machine had 237,446 hours..... to put that into perspective that is 27 years. Mind blowing...
I often do maintenance shutdowns on 1350 and 8750 draglines in the Australian Bowen Basin. As amazing as they are to see and experience first hand, once you experience pulling them apart and fixing them, they get old very fast 😂 Edit: To further explain your explanation on how the machine swings, the motors you mentioned in the front of the machine sit on a vertical axis and connect to the swing shaft (think of a driveshaft in your car), on the bottom of the swing shaft is a cassette (a big cog) and the cassette rotates along what is called the slew ring which is a very large gear ring. To put it simply, the swing shafts spin the cassettes along the slew ring which in turn rotates the dragline. The size of the dragline also dictates how many swing shafts the machine has. For example the one in the video would have 4, a larger machine might have 7. The Machine in the video is also just a little baby dragline.
One stupid question but what exactly does the machine in this case do? It just looks to me that it moves material (coal?) from a to b, with b not being a dump truck or plant or so..
They create a moving trench … ahead is ground with coal under it, the trench is dug to expose the coal so it can be mined, and they use what they dig to fill in behind them where the ground is graded and the land restored.
It doesn't matter how many times I watch videos like this on massive mining machines I'm still totally gob smacked and amazed by these huge masterpieces, and huge amounts of respect to America and the guy's who operates these giants because America is never out done when it comes to massive mining machines ❤❤🎉🎉🎉🎉🎉🎉🎉
Called 23 kv Cable. Actually 22,900 volts. Portable substation hooked to 69,000 high line. Goes into dragline to 4160 volt transformers which feed 4-3000 hp motors which drive a bunch of dc generators which feed the dc motors.
A mate of mine who is a welder told me that when the drag lines moved position in Mt Isa Australia, the entire town's electrical supply would 'brown out' as it did so.....
I'm curious what the amount of power it takes to run and compared to how much coal it digs. It's always interesting to think about the economies of scale with big equipment. I'd love to see real data on comparisons.
I bet they don’t work on Christmas. Their margins can’t be that close that they can’t shut down for a day. It’s also electric so the cold wouldn’t that bad.
@@AaronWitt you really think they can’t stop stripping for one day because people would lose power? You’re a moron who doesn’t know anything about moving dirt. How long till you’re mommy and daddy run out of money and all those people you hired are out of work.
son unas máquinas fantásticas, y más en sus mantenimientos, en el balde, cambios de cables y pines, en el boom y ni se diga en las partes internas, revolfren y Center pin, en los zapatos, toda una locura realizar trabajos de soldadura en esa areas.
Correct me if I’m wrong but isn’t Bucyrus-Erie the very first to design engineer and manufacture drag lines in the world starting in the late 1800’s? How often do they have to change out the cables due to fatigue and stress and do they have to be certified and inspected by OSHA like cables on large cranes?
Its hard to say. Page Engineering (John Page) were the first to make draglines. Both Bucyrus-Erie (now a part of CAT) and Harnischfeger (aka Pawling & Harnischfeger, later P&H Mining -> Joy Global -> Komatsu Mining) got into the dragline business in the early 1900s both operating out of Milwaukee. Neither were the first to make them, and those two companies went head to head for many years in the business, and pretty much bought out all the other smaller firms (for instance Page Engineering was bought by P&H in the 1980s). Nowadays most draglines are just maintained, and new ones haven't been built for quite some time since its easier and cheaper to maintain existing ones and replace them with rope shovels if they are no longer suited for an application. I work for one of those companies and can't say exactly how often cables are replaced especially since its heavily dependent on the work that the dragline is doing and where, however I can say pretty much everything that goes onto a mine site is inspected by MSHA at least once per year. MSHA is the mine specific version of OSHA. MSHA controls mining and quarrying exclusively, while OSHA controls pretty much anything else, including things like maintenance and repair shops that might be on mine sites.
Man they keep the old girl looking good. Inside and out. Draglines are way cool. Makes those little 3/4 yard machines I used to operate look very insignificant. Thanks Aaron for doing what you do. For an old gear head it's fun to watch. Cheers
They have a world class maintenance program!
Would love to see a big tracked digger with a slew motor on the arm i used to operate one back in the early 2000s @@AaronWitt
I can speak for the quality of work done at Coteau by good workers.
Protecting their investment,- bravo
What impresses me the most are the engineers who designed this monster and also created machines to make the parts for this.
I have made the cages housing the brake rotors you see in 7:29 and it's cnc milled then welded together and bolted to the hub. Also the rotors are 2m in diameter and weigh just under 100kg.
@@PBST_RAIDZ how in the world do they make those huge gears?
@@minkymott Where I work we don't make the gears but I'd imagine they'd be forged then cnc milled down so the teeth align with one and other.
@@PBST_RAIDZ thank you for taking the time to reply. :) I wondered how they do that.
Bucyrus Erie in South Milwaukee, Wisconsin. Gears by Falk Corporation in Milwaukee.
Awesome video. As a retired heavy equipment operator i don't think i would last long doing that unless the pay was real good. After running a excavator for years loading on and off road trucks this would make my brain rot fast .The boredom is hard to overcome. And the machine actually runs on coal , because without coal .... theres no electricity.
I know a couple people that have run the big haul trucks in the Kennecott copper mine and they say it's awesome for about the first week then it's just mind numbing repetition.
I find it therapeutic, I’m only 19 and I can shut my brain off and haul earth, granted I’m allowed to listen to music or podcast so that makes it easier.
@@ryanc8188I live right under Kennecott, run equipment doing dirt work and developments, it gets old quick no matter how big they are. And I grew up running equipment
at 21 ur going to want to labor again. @@Jsnure1913
Indeed, I quit cnc operations for same reason. Most boring job ever just watching it work all day twiddling my thumbs and looking at clock every 15 min hoping an hour had passed.
1:54 That machine is 106 days short of operating 10,000 days.
The most custom piece besides the bucket is the drive gear. I wonder how many individual sections it was cast in and if any of the sections of drive gear have been replaced.
Great question 👍! I wonder how long it took the mechanics to build the machine onsite after the pieces are brought in by train?
@@tristenklein225 not sure about the dragline. I’ve built rope shovels it takes about 3 months to finish a Bucyrus 495HR2 rope shovel. So I’ll assume the dragline might be 6 months or more depending with the location where you build it.
Two years ago they replaced the tub on this exact dragline I believe. If not this one it was one of the other two at this same mine.
th-cam.com/video/ACrTGwEqxHQ/w-d-xo.htmlsi=4TofasCwqrvmAsyQ
@@gunstuff5273 Awesome video, cheers for sharing, Guns.
Do you mean 10.000 hours
re reference, the machine hours indicates that one particular machine has been running for 28 years of its 40 year life span. WOW
I was fortunate enough to work 7 shifts of Big Muskie only 4 months before she was decommissioned. A true behemoth!
I call my old ford super duty big Muskie! Hats off
Big Muskie should never have been cut up for scrap because it was a true one off never to be built again, sounds sad but watching the videos of it being cut up was upsetting because the world will never see another one.
@@theunemployedtrucker I'm the same way. I have only seen videos of the machine, but when they blasted the A-frame off of it, and the boom fell to the ground, ruined, it was a might saddening to me. I have loved machinery like it, since I was a toddler. Some might consider me a nut, but that's the way I am.
@@wmden1 I was able to visit the resting place of the Big Muskies bucket…defies description! Can you tell me if the Big Muskie was larger than this machine? If so, by how much. Thanks.
@@WDFJR16345 I believe the narrator said the bucket of this machine holds 104 cubic yards. From what I have seen and heard on videos of it, The Big Muskie bucket held 225 cubic yards. That is over twice the capacity of this machine here. I believe the Big Muskie was said to weigh 26 million pounds total, and was significantly larger than this dragline. That's about all I can tell you and be pretty sure about it.
Everybody gangsta until the drag line starts WALKING...
The closest we will ever get to a Warhammer 40K Titan. 🤣
The bucket and the amount of dirt it holds is tiny compared to the size of the machine. Just shows how difficult it is to move the earth
This is such a cool video. I worked for a heavy engineering company in Australia in the 70's called Perry Engineering. I operated a Skoda horizontal floor borer that machined the gear boxes and swing shafts for draglines.
the efficiency of these machines is so cool
Awesome video, impressive point of view. 👌
Awesome video brought back alot of good memories i got to run a drag line half that size at a limestone quarry in central Illinois that my dad worked at when i was a freshman in highschool it was an awesome experience
Great Video!... My Grandfather on my Daddy's Side of the Family worked for a Company here in Pennsylvania called Highway Equipment... Before he passed away back in the late 1970's, He worked on Big Bucyrus Erie Machinery... He also had a Weld Shop... The sheer size of some of those Old Shovels and Draglines is just totally overwhelming!... This Kid does a good Job with these Videos... I enjoy watching this stuff... I've been in Heavy Equipment Business my entire life... Over 32 years, I'm pushing 50 now... And I learn something new every day about this type of stuff.... Like I said, Great Video!...
amazing!!
I was lucky enough to not only get to see one of these in person but the guy knew the driver so he stopped the machine and let us onboard. The sensation of being in the cab while its swinging around and throwing its bucket is wild. So much weight
It’s like moving a whole factory around.
Hey man. My name is Matt. I was the Project Manager for rebuilding the boom on this 10 years ago. Have some cool photos and videos of it.
Do you have them posted anywhere?
@@minkymott
Not publicly.
@@Matt-mp7qu too bad, they seem interesting.
Well you sort of got one thing wrong. I guess they didn't tell you, that if you were standing on the very end of the boom, when its swinging you'd be travelling between 60 - 80 miles per hour !!! Thats pretty damn fast for an earth moving machine!
Not true actually. I have tested and calculated it. It is about 37 mph.
@@joshkuhn3974 oh yes that would be right. I'm Canadian and it's 60-80 km/hr. They tested the ones up at Syncrude back when they had them. It's still pretty darn fast!
Next time your up at Coteau, ask to see the coal handling facility and ask to maybe tag along with the dragline maintenance guys.
My father ran a drainage earth moving business and operated draglines, not like the size of this beauty of course. A dragline was one of the most difficult earth moving machines I've ever had to learn how to operate, my father could make a dragline sing, they were an awesome machine in there day and still have there uses even today. Cheers for the great reel.
my dad made the main spool drive gears (amongst other parts) for drag lines like these back in the 80's and they're still out there running today!
Did he work in Pocatello?
nup he worked at vickers machine works in melbourne australia@@ileenmcminn2062
this is actually epic i would love to have your job aaron 👍great vids love the content keep it up
This can be called a building. 凄い!😱
Good show, Aaron. We had one on the last job that I was on. Nothing as big as that one. Thanks for sharing and have a great weekend!!
GREAT STUFF AND POWERFUL CREATING 😊😊😊😊😊
The reliability of that machine is the most amazing part. To operate for 40 years is just NUTS!!
Wish I could give 10k thumbs up for this one!!! AWESOME VIDEO, THANK YOU!
Hello i'm from the biggest production indonesian coal mining " berau coal ".
I always watch your videos and fantastic experience about coal mining in the europe one day i would like to works there are
Thank you! I always had a strange fascination with all the big machines with rooms inside of them!
Well thank you for this video. For many years my Company (Monitek) performed vibration analysis on these machines in coal mines throughout Australia, the purpose being to detect the early warning signs of wear (defects) in the many large bearings and gears driving them, thus allowing corrective maintenance to be performed before a catastrophic and very expensive failure occured. One of our employees later emigrated to the USA and set up a sister company in Wyoming to service the coal mines in the region. Never thought I would see this sort of detail on TH-cam.
Best video yet I wish you could just do videos of draglines and large excavators
This is just so incredible .. Thank you for showing this to us.
The sound it makes when "walking" is awesome, like out of a transformer movie
It's a shame not many of these machines of this size exist anymore.
I've worked around 9800 diggers, 930 haul trucks and all the rest but these things are Goliath's!
Aaron, that is absolutely cool! Got to see more of the "guts" of a dragline like this with you than elsewhere, thanks!
Big toy for big boy are very impressive machine to watch, thanks for the video.
thanks for watching
Shame they don't make 'em as big as Big Muskie anymore.
Whoever design, engineer and build these machines. Salut to you all!
By far, this is the best giant dragline tour I've seen. AWSOME video!!!
Wow. Incredible
Awesome video... thanks for sharing 🇲🇨🚜🚛❤️🌼👍👍
Thanks! That's Cool..
Really gotta give these guys credit. No wind power machine could make it possible to live 24/7 the way we do. Great video. Thanks for sharing.
Why wouldn't wind power work? Or for that matter any other form of energy? Electricity is all the same, no matter how it's generated.
I run a power plant and monitor our 3 wind farms. Yeah the wind doesn’t blow all the time. Especially on the coldest of nights. No wind no power. I’m grateful for the coal and natural gas power generation! My hats off to those who work in that cold up north.
@@titaniummechanism3214
Yeah... I think the OP may be tilting at windmills. (Almost literally: they kinda teed that up, eh?)
Energy is energy, and, sure, there is the intermittancy issue with wind, but there are solutions like pumped hydro, etc for that. Installed wind power is already less expensive than any source other than, in some marginal situations, natural gas or coal- and the gap is closing fast! (It would already be closed except for the absurdly massive fossil fuel incentives, favroable interest rates, tax breaks, and immunity for the environmental damage they cause, etc, etc.)
Uncledad hates the wind, he says if anything is gonna blow him it'll be
Well
I can't finish that story in polite company, but it's a funny 'n
@@tomarmadiyer2698
I could magine! (And wish I didn't).
Cheers!
Its pacific rim in real life! Very cool. I always loved books about super heavy equipment
Matt from Diesel Creek should buy this.
Like driving a freakin appartment bloc. Day-um. 😂
Thanks for the video. Interesting! Three other questions: 1) Do the booms move? 2) how much does this machine weigh? 3) How much does this machine cost?
Great video
Great video aaron❤️
Back in the late '60's we were fishing near the open pit coal mines around Wilmington IL. There was an immense dragline there, and we were invited to tour the machine. My father drove our Plymouth station wagon into the scoop of the dragline and there was enough room for another station wagon next to our car.
Awesome video, such a cool machine.
Woww.... Amazing
Great video
Very interesting machine ,thank you for showing us the work of those important people.
An engineering marvel.
It's like a warehouse with extra functions. When you're a piece of equipment has a kitchen in it you know it's big
Thanks for the info
Your best video to date 🎉
Thanks mate
Serious machine. Really enjoyed it.
I operated draglines for almost twenty years best job I ever had 💪
Love ur videos bro keep it up 💯
Thanks for watching
What a remarkable machine! Its crazy that at the make of this video this machine had 237,446 hours..... to put that into perspective that is 27 years. Mind blowing...
40 years of work out of it! probably still being paid for too
I would love to see how they are manufactured and assembled on site.
You must be a lucky guy to be in one 👍👍👍
Its crazy that this machine is pretty much like a building that moves. These machines are insane feats of engineering
Started Peabody Coal 1978 had 8800 Marion 100Yd Homestead Mine Western KY . 1050BE shovel really cool for 18 year old .
I often do maintenance shutdowns on 1350 and 8750 draglines in the Australian Bowen Basin. As amazing as they are to see and experience first hand, once you experience pulling them apart and fixing them, they get old very fast 😂
Edit: To further explain your explanation on how the machine swings, the motors you mentioned in the front of the machine sit on a vertical axis and connect to the swing shaft (think of a driveshaft in your car), on the bottom of the swing shaft is a cassette (a big cog) and the cassette rotates along what is called the slew ring which is a very large gear ring. To put it simply, the swing shafts spin the cassettes along the slew ring which in turn rotates the dragline. The size of the dragline also dictates how many swing shafts the machine has. For example the one in the video would have 4, a larger machine might have 7. The Machine in the video is also just a little baby dragline.
One stupid question but what exactly does the machine in this case do? It just looks to me that it moves material (coal?) from a to b, with b not being a dump truck or plant or so..
It strips overburden to reach the coal
I had the same question because it looked like both from where it was digging and dumping to be the same hight
They create a moving trench … ahead is ground with coal under it, the trench is dug to expose the coal so it can be mined, and they use what they dig to fill in behind them where the ground is graded and the land restored.
Amazing machine
I was mesmerized.
Thanks aaron
Working on a floating (3m^3) grab dredge everyting seemed big to me on my machine... and then I see this ;)
It doesn't matter how many times I watch videos like this on massive mining machines I'm still totally gob smacked and amazed by these huge masterpieces, and huge amounts of respect to America and the guy's who operates these giants because America is never out done when it comes to massive mining machines ❤❤🎉🎉🎉🎉🎉🎉🎉
I bought one of those last week to dig my pond. Enjoying the comfort of the cab.
This is what makes TH-cam
The funny thing is, the bucket looks tiny and cute compared the whole machine lol.
Worked around 2 diff ones here in eastern Ky…ones in the coal mining in Appalachia vid and the other I think went to Florida yrs ago
I love drag lines
Up here they walked "The Anthracite King" some crazy distances, Some of it to do the cut for RT 81
That’s one of my favorites…im in eastern Ky
Really enjoyed that video Aaron.bit differant to the volvo ecr25 I run in the uk
Heaps still working in Central Queensland Australia 🇦🇺
I work on them every other day
Yeah mate we’ll be out there in a few weeks
I wonder what the voltage on the power cable across the ground is. 13KV? We all know that is not 480V.
23KV running through that cable.
Called 23 kv Cable. Actually 22,900 volts. Portable substation hooked to 69,000 high line. Goes into dragline to 4160 volt transformers which feed 4-3000 hp motors which drive a bunch of dc generators which feed the dc motors.
A mate of mine who is a welder told me that when the drag lines moved position in Mt Isa Australia, the entire town's electrical supply would 'brown out' as it did so.....
Aaron super film.Pozdrawiam z Polski.
Thanks again buildwitt. What a incredable machine.
It might be essential to the community. But its first and foremost cool and big😂. Great video
I'm curious what the amount of power it takes to run and compared to how much coal it digs. It's always interesting to think about the economies of scale with big equipment. I'd love to see real data on comparisons.
the extension cord didn’t look That big, maybe 220v 60 amps.😉
It doesn’t dig any coal.
Great video thanks for sharing 👍
Bellissimo video complimenti 👍👍👍👍
I bet they don’t work on Christmas. Their margins can’t be that close that they can’t shut down for a day. It’s also electric so the cold wouldn’t that bad.
last I checked people still use power on Christmas
@@AaronWitt you really think they can’t stop stripping for one day because people would lose power? You’re a moron who doesn’t know anything about moving dirt. How long till you’re mommy and daddy run out of money and all those people you hired are out of work.
I cant fathom how big that machine is 😊
Brilliant.
Incredible, it is rare to see the inner workings of drag line.
son unas máquinas fantásticas, y más en sus mantenimientos, en el balde, cambios de cables y pines, en el boom y ni se diga en las partes internas, revolfren y Center pin, en los zapatos, toda una locura realizar trabajos de soldadura en esa areas.
That’s so cool, live in that area see it everyday, wish I could’ve meet you there
Correct me if I’m wrong but isn’t Bucyrus-Erie the very first to design engineer and manufacture drag lines in the world starting in the late 1800’s?
How often do they have to change out the cables due to fatigue and stress and do they have to be certified and inspected by OSHA like cables on large cranes?
Its hard to say. Page Engineering (John Page) were the first to make draglines. Both Bucyrus-Erie (now a part of CAT) and Harnischfeger (aka Pawling & Harnischfeger, later P&H Mining -> Joy Global -> Komatsu Mining) got into the dragline business in the early 1900s both operating out of Milwaukee. Neither were the first to make them, and those two companies went head to head for many years in the business, and pretty much bought out all the other smaller firms (for instance Page Engineering was bought by P&H in the 1980s). Nowadays most draglines are just maintained, and new ones haven't been built for quite some time since its easier and cheaper to maintain existing ones and replace them with rope shovels if they are no longer suited for an application.
I work for one of those companies and can't say exactly how often cables are replaced especially since its heavily dependent on the work that the dragline is doing and where, however I can say pretty much everything that goes onto a mine site is inspected by MSHA at least once per year. MSHA is the mine specific version of OSHA. MSHA controls mining and quarrying exclusively, while OSHA controls pretty much anything else, including things like maintenance and repair shops that might be on mine sites.
@@helloitsjasonThanks for the insight and history 👍
Good video!
All that machine for a tiny bucket.
True
it really isn't, you can park two tour busses in the bucket, it is an issue of perspective.
One hundred yards per scoop is about five (18- wheeler) semi-truck loads.
Started with 105 yd rebuildable buckets back in early 80s. Changed to 115 yard throw away lighter buckets. Don’t know what they’re using now.
These buckets now are close to 130 yards.