Mercane Wide Wheel Brake Upgrade by MTB Road Hydraulic Disc Brake setup

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 ส.ค. 2020
  • Tips: This product with different common line pulling disc brake, This product is Hydraulic Brake principle not spring! non-professionals should not open the oil cap,should let professionals do it,otherwaise maybe spill.
    MTB Road HB-100 MTB Road Line Pulling Hydraulic Disc Brake Calipers Front & Rear Mountain bike disc brake E-BIKE disc brake
    Model:HB100
    Brand: ZOOM
    Model: HB-100
    Material: Alloy
    Color: Black/Red
    Weight: Front-205.7g, Rear-206.3g, excluding the rotors
    Brake Type: Lining Pulled Hydraulic Disc Brake
    Brake Principle: Dual Piston Brake
    Origion: Taiwan
  • บันเทิง

ความคิดเห็น • 35

  • @non-existentbird3176
    @non-existentbird3176 2 ปีที่แล้ว +1

    日本ではワイドホイールの動画がほとんどないのでとても参考になりました!
    私もキャリパーの交換をします
    段差に弱い車種だけどコンパクトで軽く、綺麗な道では気持ちよく走れますね!

  • @DJMISTECK
    @DJMISTECK 3 ปีที่แล้ว +1

    thank you

  • @alidalkus3853
    @alidalkus3853 3 ปีที่แล้ว +3

    You can fit a hydraulic brake. With a little bit shaving

  • @MiguelLopez-wd7ko
    @MiguelLopez-wd7ko 2 ปีที่แล้ว +1

    Hola, he puesto el freno trasero viendo tu vídeo pero el freno delantero no lo puedo poner, sabes cómo podría ponerlo, muchas gracias

    • @superwellplayed
      @superwellplayed 7 หลายเดือนก่อน

      Does not fit front, you have to keep original.

  • @magnuskennedy8214
    @magnuskennedy8214 2 ปีที่แล้ว +1

    This does not work well.
    I struggled with break pads wearing on the original breaks, so watched this video and got a pair of these.
    After trying various sets of break pads I eventually gave up and fitted back the original calipers.
    Problem? No break performance. Tried different pads with little variation.
    Problem, my guess, is low quality calipers. I’ve spent a lot of time to mitigate this, but the moving parts of the caliper is not moving as expected. Full break force barely moves them.

    • @finn7383
      @finn7383 ปีที่แล้ว

      There is a tiny adjustment screw at the end for that. The one on the arm. Had the same issue and this solved it

    • @I_Dont_Care49
      @I_Dont_Care49 ปีที่แล้ว

      I will get these and try to put them on myself and if I can't do it right so I will take it to the bike shop where the bike shop previously did the original brakes where I couldn't tighten them now I'm here keep tightening the brakes so if anything so I will return them and as it will be from amazon so they won't care if it's damaged or not because they destroyed returned laptops and etc.
      Amazon does have warehouses full of returned items that will be destroyed so if these don't work out so I will get my money back for the brakes.

  • @OsrmMtb
    @OsrmMtb 3 ปีที่แล้ว +1

    Nice vid, I subbed with notifications on I also do this on my channel!

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว

      thank my friend, may i know your channel name please?

  • @JH-cx2ms
    @JH-cx2ms 3 ปีที่แล้ว +1

    Was there a noticeable difference with the upgraded brakes?

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว +2

      yes, you will feel it and can trust on it , the wheel will lock with this disc brakes
      , i had a problem with my original disc brakes, some times its jammed!!! so i replaced it now it’s really doings good,

    • @priitnigola
      @priitnigola 3 ปีที่แล้ว +2

      I currently did the rear one (front needs a longer cable and sleeve, as its pulling from the other side) and i can say that it feels much nicer. Original brakes only press from one side, these pull from both. It does not feel as good as a full hyraulic set, but its heaps better than the original and two calipers from aliexpress cost about 35 eur. Im glad i did the rear swap, will do the front soon.

    • @mattdee8488
      @mattdee8488 2 ปีที่แล้ว

      @@priitnigola did you ever get around to the front ?

  • @graff4life998
    @graff4life998 3 ปีที่แล้ว +2

    Does this work for the 2020 widewheel pro???

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว +1

      yas

    • @priitnigola
      @priitnigola 3 ปีที่แล้ว +2

      i bought 2 rear calipers for my 2020 pro, rear one fits perfectly(did not have to cut anything), front one needs a longer cable and sleeve. Will do the installation and let you know

    • @rovieperez9836
      @rovieperez9836 2 ปีที่แล้ว

      @@priitnigola pls.do.thanks

    • @10010Linus
      @10010Linus 2 ปีที่แล้ว

      @@priitnigola how did the front brake swap go?

    • @k81rclab42
      @k81rclab42  2 ปีที่แล้ว

      same thing

  • @evgeniykornev5220
    @evgeniykornev5220 3 ปีที่แล้ว +2

    Will they fit in the front??? Tell me please

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว

      my one is old model, but i believe front and rear is same suspension, it will fits

    • @alidalkus3853
      @alidalkus3853 3 ปีที่แล้ว +4

      @@k81rclab42 unfortunately it doesn't. Front has much narrow space

    • @ElieZ
      @ElieZ 3 ปีที่แล้ว +1

      Front bracket fits the back on 2019 mercane model.

  • @mudflap2020
    @mudflap2020 3 ปีที่แล้ว +1

    Do you notice that the pad doesn't touch the whole rotor?

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว +1

      yes, you need to file 1mm both side of the break joint

    • @mudflap2020
      @mudflap2020 3 ปีที่แล้ว +1

      @@k81rclab42 where is the break joint?

  • @davekensk8
    @davekensk8 ปีที่แล้ว

    mine does not fit!! i have the widewheel pro 2020

    • @I_Dont_Care49
      @I_Dont_Care49 ปีที่แล้ว

      You probably got wrong ones or something I'm gonna try them if I can't put them on or the bike shop can't so I will return these brakes.

  • @mudflap2020
    @mudflap2020 3 ปีที่แล้ว

    For 2020 model will they fit front and back?

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว +2

      yes

    • @mudflap2020
      @mudflap2020 3 ปีที่แล้ว

      @@k81rclab42 I would just need to buy 2 sets because of the mount correct?

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว

      @@mudflap2020 www.ebay.com/itm/ZOOM-XTECH-HB100-MTB-Line-Pulling-Hydraulic-Disc-Brake-Calipers-Front-Rear-/184022215918?_trksid=p2349624.m46890.l49286

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว +2

      buy 2 front break only , you don’t need rear one

  • @skreem3
    @skreem3 11 วันที่ผ่านมา

    Sorry but that is a shit brakecalipper. Only one piston. It should have a minimum of 2 pistons, So that you don't have to set them up all the time.