Kyosho Mk2 Fazer FZ02 R First Look

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ต.ค. 2024

ความคิดเห็น • 92

  • @FarmerFpv
    @FarmerFpv 8 หลายเดือนก่อน +7

    That looks sick. I'm a sucker for Rally-type RC cars. I only own 1 Kyosho, it's the USA 1 Monster Truck. I have the HPI Racing WR8 Nitro 3.0 2001 WRC Subaru 1/8 4WD rally car. It is so much fun to drive and a mouthful to say. 😂

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน +2

      @FarmerFpv 😆🤣

    • @laserbeam1620
      @laserbeam1620 2 หลายเดือนก่อน

      Lmao!! 😂😂😂

  • @Glowingtomato
    @Glowingtomato 8 หลายเดือนก่อน +3

    I like how it's more modified for rally than the TT02 rally versions were. It's a little too similar (because of the livery) to my '99 Impreza from Tamiya so I'll be waiting for another body option or a kit like the base Fazer

  • @scaleworksRC
    @scaleworksRC 8 หลายเดือนก่อน +1

    "We've got clearance, Clarence"
    Love those 2 beauties. Probably my 2 favorites.

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน +1

      @scaleworksRC 😆🤣

    • @scaleworksRC
      @scaleworksRC 8 หลายเดือนก่อน +1

      @@ReadySetRC hehe, you know the movie ✈(propeller sounds)

  • @GreatLakesRC
    @GreatLakesRC 8 หลายเดือนก่อน +1

    Kyosho nailed this body 🤩🤩 the brushless Challenger is so good there is no need for brushed. Come on Kyosho!

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน +1

      @GreatLakesRC Hey Aaron! You know I don't mind the brushed system. It's like when folks like the brushed mad Van more than the brushless, also the durability. I want to see with all the suspension differences how it's going to perform with the brushed setup. You know, never ruling out brushless though😊

  • @takalakjones3248
    @takalakjones3248 8 หลายเดือนก่อน +2

    This is my first fazer. I’m loving it. The Bugeye is beautiful and the rally suspension is dreamy.
    Was planning on getting the LC racing chassis next. I would love a 1/10 rally shootout.

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @takalakjones3248 Congrats on the Fazer👍 That's 3.

  • @shafiqjan1474
    @shafiqjan1474 7 หลายเดือนก่อน +1

    I got the older Subaru then the Rally conversion kit was released. Got a Fazer chassis and the Rally kit so I now have a tarmac and dirt car and they are both so sweet to drive. My street is quiet so I often swap on drift tires and head out front for some fun...

  • @YoShImUrA53
    @YoShImUrA53 8 หลายเดือนก่อน +3

    You should really do a 1/10th comparison test. But I think you're missing the two Tamiya chassis to compare these with, the XV01 and XV02 (PRO, not the RS).
    I own a few of both with different specs as well as the LC Racing, but the kit version, rather than the roller (PTG2R, which comes wirh a few upgrades).
    I personally prefer the LC Racing above them all, but I'm very intrigued by the Kyosho. It looks amazing, both suspension wise as well as the body. The Fazer is a solid platform. So, curious to see how it drives in comparison with the others.

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @YoShImUrA53 That's 1!

    • @YoShImUrA53
      @YoShImUrA53 8 หลายเดือนก่อน

      Sorry, I missed what you mean there. ​@@ReadySetRC

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน +1

      @@YoShImUrA53 You were the first one to request the shootout. I'm putting a counter in the comments.

  • @RallyandTrail
    @RallyandTrail 8 หลายเดือนก่อน +2

    Absolutely beautiful 🤩
    I have one but not had the chance to run it .
    Awesome channel man 😎👍🏁

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @RallyandTrail Right! A thing of beauty🥰 Thanks for the support.

  • @rcjoe406
    @rcjoe406 8 หลายเดือนก่อน +1

    After my experience with the mad van this rally is definitely on my list the shock tower setup reminds my of the MV 😊

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @rcjoe406 A lot of folks mixed on the MV. I love mine. Expectations right! Detail is right there with the MV, maybe more.

  • @skylar1112
    @skylar1112 8 หลายเดือนก่อน +1

    Looks nice a nice kit! I go to willis hobbies sometimes. I've bought paint and train items there. I thought they were heavy on arrma, Traxxas and Losis, i didn't see any kyosho. I'll have to pop in again

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @skylar1112 You got to look at the wall behind the front window. I special ordered it. Just ask Jay, most stuff you don't see he can try to special order.

  • @workingclassperson2124
    @workingclassperson2124 8 หลายเดือนก่อน +1

    I got the Buick riviera I raised it up using the different mountings available and used the wheels and tires from the hbx Bomber truck that came out not to long ago no issues at all and I put the kyosho tires on the bomber cause why not. I’ll probably get this Subaru so I can keep the Buick on road. Oh I even got plastic drift wheels for the Buick that’s fun to see a classic car drift ( carefully of course”) kyosho is just awesome in everything they do. I wanna try the supercharged ones but I’d hate to flip it at top speed and doing a body swap just would kill the look imo. Rock on 🤘🏼

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน +1

      @workingclassperson2124 I wanted to get the Buick but went on a Kyosho strike at the time😆 Drift would be sweet!

  • @nc2827
    @nc2827 8 หลายเดือนก่อน +3

    The only thing that sucks about this car is the wheelbase. It’s 260mm when most other 1/10 TCs are around 257. Dosnt sound like much but in actuality it really limits the bodies you can fit, if you want it to be right, as I do. I like the platform so much, way higher quality than a Tamiya IMO. so I modified the wheelbase. Trimmed some of the rear lower a arm mount and some of the top arm to move the rear wheels up 3-4mm. I just used 3mm washers to make up the space. Now I can fit basically any 1/10 body without issue, and if I wanna use the cool body it comes with (and I won’t cause it’s so nice) then I can simply move the washers to the front and re extend the wheelbase to stock.
    One thing to note is moving the WB up you will have to screw through the rear little lip bumper with the heads facing in, that way your rear hinge pins still have something to hit and won’t slide out.
    Love the car in every way, just wish it was 3mm shorter for body mods.

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน +1

      @nc2827 Great tip👍

    • @anglerfishtanking
      @anglerfishtanking 2 หลายเดือนก่อน

      You happen to have resources on how to do that?

    • @nc2827
      @nc2827 2 หลายเดือนก่อน +1

      @@anglerfishtanking I can make a video, but its pretty simple. Take the rear arms off, use a dremmel to shorten the front of them by a few mm, top and bottom arms, and then fill the extra space with some 3mm washers. takes some trial and error but the result is worth it. The rear axles will be shifted forward ever so slightly but wont bind or effect performance.

  • @MrGoldmember2
    @MrGoldmember2 8 หลายเดือนก่อน +2

    Would love to see your comparison thoughts on the two 1/10 rally’s!

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @MrGoldmember2 That's 2!

    • @joseespinosa5663
      @joseespinosa5663 8 หลายเดือนก่อน +1

      I concur

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @@joseespinosa5663 That's 6

  • @matusknives
    @matusknives 7 หลายเดือนก่อน +1

    I would absolutely love to see a rally shootout in 1/10 scale! Especially since I am considering the Pro kit version of the Rally Chassis by LC Racing.

    • @ReadySetRC
      @ReadySetRC  7 หลายเดือนก่อน +1

      @matusknives My math maybe wrong but that makes 8 for the shootout😊

    • @matusknives
      @matusknives 7 หลายเดือนก่อน +1

      @@ReadySetRC I am up for your challenge 😁👍

  • @Rev792
    @Rev792 5 หลายเดือนก่อน +1

    Shot out with the xvo2 as well

    • @ReadySetRC
      @ReadySetRC  5 หลายเดือนก่อน +1

      @Rev792 That's on my wish list, probably won't happen before this shootout.

  • @laserbeam1620
    @laserbeam1620 2 หลายเดือนก่อน

    Body posts remind us they are rc cars!!

  • @Hillbillypunk
    @Hillbillypunk 5 หลายเดือนก่อน +1

    Mine does get pretty hot with that cover on. It also gets filthy without out it.

    • @ReadySetRC
      @ReadySetRC  5 หลายเดือนก่อน

      @Hillbillypunk True!

  • @sparetimerc
    @sparetimerc 8 หลายเดือนก่อน +1

    That is a nice looking Fazer02. The body is so realistic, 90% of my RC are bashers on that could be a track, two on road, now watching your shoot-out series and seeing your Rally car collection I really am looking at the Rally cars. Would be awesome rip it around the corners on the track. So question for you. If you was going to give advise to a friend on one 8th scale and one 10th scale what would you recommend? Thanks for sharing the new Kyosho Fazer02. Take care and stay safe

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน +1

      @sparetimerc Man that list is really getting long😆 Because of the rough areas I run, the bigger cars tend to do better. I will say the smaller ones are super scale but at the end of the day they are not shelf queens so I will always lean to the larger cars.

    • @sparetimerc
      @sparetimerc 8 หลายเดือนก่อน +1

      @@ReadySetRC Thank you, again looking at getting a couple of Rally cars and since I know you are a Rally person I will take your advice.

  • @1972bmac
    @1972bmac 3 หลายเดือนก่อน

    Nice vid , the on rally edition all 4 shocks are the same length?

  • @fogcityrc4874
    @fogcityrc4874 8 หลายเดือนก่อน +1

    As usual great stuff. I have the LC rally with the same body. I love that car. Yes do a shootout plz. Also check out Firebrand RC for some good rally tire/wheel options.

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน +1

      @fogcityrc4874 John, that video you did with the LC racing is amazing. FOLKS IF YOU HAVE NOT GONE TO JOHN'S CHANNEL AND CHECKED OUT HIS VIDS AND/OR GIVEN HIM A SUB, PLEASE DO. HE HAS SOME GREAT CONTENT. That's 4.

  • @ianrichardson2691
    @ianrichardson2691 8 หลายเดือนก่อน +1

    +1 for the 1/10 rally shoot out although I must say that you should consider getting a Tamiya xv-01 or xv-02 in there. The xv is a brilliant rally chassis. Are you going to get the new Traxxas Rally? Mine is coming tomorrow and I am buzzing 😅

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @ianrichardson2691 I'm really trying to curb my additions to the collection this year😊 Plus I have a few kit's to build one of them being a Tamiya, so unfortunate it won't make the short list. As for the Traxxas Rally, I'm waiting to see if they drop a new shell. Short of the clipless system and the HD parts, I have a more hopped up Traxxas Rally than the new VXL. But I do love it(the new one)!

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน +1

      @ianrichardson2691 That's 5.

  • @rcplaytime
    @rcplaytime 8 หลายเดือนก่อน +1

    beautiful rally cars dude 👌😀👍👍😎😎

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @rcplaytime Kyosho killed it. Now time for them to get rid of the body mounts😆

  • @enricomiceli5517
    @enricomiceli5517 8 หลายเดือนก่อน +1

    I really love this kit but , if u really want a rally chassis, just go for the xv01. It is a nice kyosho but , comparet to the tamiya, has just longer shocks amd higher shock towers but not adjustability whatsoever

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @enricomiceli5517 Problem with most you are going to lose them with an RTR. I've built my fair share of Tamiya's it's how I started off 20+ years ago. Also bad content creator, this has adjustability with the shock mounts and a few hop ups that give you more adjustments.

  • @spenn2007
    @spenn2007 8 หลายเดือนก่อน +1

    These are shelf queens to compete in the Tamiya market. I just can't bring myself to invest in anything brushed, this bad boy would be sitting pretty right on my desk shelf to be stared at and showed off.

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @spenn2007 Oh no! Got to run it. Surprising enough the Kyosho brushed RC's are not bad on speed.

    • @joshuajkoplin
      @joshuajkoplin 6 หลายเดือนก่อน

      What I’m the hell are you talking about. There were fast brushed RC cars long before brushless was ever invented. These cars are made to be driven. Kyosho doesn’t make toys. Tamiya is not if the level that Kyosho is at. Ever heard of the Kyosho Inferno? 90% of RC cars today are based on the designs of the original Kyosho Burns and Infernos.

  • @joseespinosa5663
    @joseespinosa5663 6 หลายเดือนก่อน +1

    Shootout shootout shootout!!!

    • @ReadySetRC
      @ReadySetRC  6 หลายเดือนก่อน +1

      @joseespinosa5663 I forgot the count for the shootout but I'm going to have to put one together😊

  • @DeathtrapCult
    @DeathtrapCult 7 หลายเดือนก่อน +1

    I hope they start selling this body, I want a spare

    • @ReadySetRC
      @ReadySetRC  7 หลายเดือนก่อน

      @DeathtrapCult Right!

  • @MauzyrockRC
    @MauzyrockRC 8 หลายเดือนก่อน +1

    Dude it was the next logical step. 🤘😂🤘

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @MauzyrockRC Right!

  • @MaRCosRC.
    @MaRCosRC. 7 หลายเดือนก่อน +1

    Acabo de descubrir tú canal, muy bueno, buscaba pruebas del kyosho, haz la comparativa, por favor.
    Gracias.

    • @ReadySetRC
      @ReadySetRC  7 หลายเดือนก่อน +1

      @marcosalos1548 Gracias. Escribe el número 9 para la comparación.

  • @allscalerc
    @allscalerc 8 หลายเดือนก่อน +1

    Awesome video as usual! 👍👍👍👍

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @allscalerc Thanks for the support💪

  • @derekc6425
    @derekc6425 7 หลายเดือนก่อน +1

    Nice video buddy! I've been eyeing this car! Where did u get the light kit? Can u provide the link? Thanks!😁

    • @ReadySetRC
      @ReadySetRC  7 หลายเดือนก่อน

      @derekc6425 Thanks man! I strongly would not recommend it. It was suppose to be 4 white and 4 red. I got 5 white and 3 red. I've purchased them before, they're off Amazon, Sharegoo, they are 5mm LED's but they are not a direct fit. I would not suggest them at all. I've used RC-Lighthouse in the past. They will customize for you too. They are off FB. When I replace these lights that's where I'm going.

  • @strawberrymochiiz
    @strawberrymochiiz 8 หลายเดือนก่อน +1

    Awesome review keep it up.

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @strawberrymochiiz Thanks👍

  • @ricardopires4713
    @ricardopires4713 2 หลายเดือนก่อน

    I dont undersatnd for this car i have to buy 4 clear leds and 6 red leds...can all that be connected to the esc without having to know much about connections? In their site i see 4 clear or 4 red or a third item 2 clear and 2 red leds! I dont know what should i buy!

  • @anglerfishtanking
    @anglerfishtanking 2 หลายเดือนก่อน

    What light kit did you end up using?

  • @assjack1124
    @assjack1124 8 หลายเดือนก่อน +1

    Thanks for making this video. I was just checking these out after I watched your latest rally shootout.

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @assjack1124 Thanks for checking it out👍

  • @JonnyJetson754
    @JonnyJetson754 8 หลายเดือนก่อน +1

    Wow man super neat Rides

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน +1

      @JonnyJetson754 Outside Tamiya, these are some of the most scale 10th scales I've seen.

  • @gwr3845
    @gwr3845 3 หลายเดือนก่อน

    Is this one not brushless then just to ask?

  • @whitmanft
    @whitmanft หลายเดือนก่อน

    is 3s an option w/ the stock motor and esc?

  • @bapojean5981
    @bapojean5981 8 หลายเดือนก่อน +1

    A link would be appreciated. I am not super familiar with this line and want to be sure I get this exact model.

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน +1

      @bapojean5981 My guess you did not see the description. I bought it from my local hobby store. You can call them up if you want to pick it up from them but this was purchased the old school way😊

  • @MusicRCBicyclesCoffee
    @MusicRCBicyclesCoffee 7 หลายเดือนก่อน +1

    I want to try this chassis as well. Thanks for the review on this one. :)

    • @ReadySetRC
      @ReadySetRC  7 หลายเดือนก่อน

      @MusicRCBicyclesCoffee Thanks for stopping by to check it out👍

  • @workingclassperson2124
    @workingclassperson2124 8 หลายเดือนก่อน +1

    And ya do a shoot out. My money is on the kyosho.

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน +1

      @workingclassperson2124 Number 7 for the shootout

  • @hermantoothrot3642
    @hermantoothrot3642 8 หลายเดือนก่อน +1

    they are almost too beautiful to bash 😅

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @hermantoothrot364 Got to run it!

  • @deltazero3796
    @deltazero3796 8 หลายเดือนก่อน

    All of the rally rc cars suffer from one thing:
    ground clearance and suspension work.
    Tamiya, Kyosho, every single rally/rx rc car, ground cleance SUCKS.

    • @deltazero3796
      @deltazero3796 8 หลายเดือนก่อน

      This should be also a kit version.

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @deltazero3796 There is a kit, a two part kit😆

    • @ll.7927
      @ll.7927 8 หลายเดือนก่อน

      Yea I wish they found a way to make them handle like buggys. Would love to take these to a 1/10th big track n rip these

  • @assjack1124
    @assjack1124 8 หลายเดือนก่อน +1

    The Mojave 4s would make one hell of a platform to start a custom rally car.

    • @ReadySetRC
      @ReadySetRC  8 หลายเดือนก่อน

      @assjack1124 That or even the Traxxas Raptor R chassis. I actually thought that's what Traxxas would have released as an updated rally.