helipal.com - How to start Walkera 4G6 Helicopter ?

www.helipal.com...
Outdoor Helicopter Fully Scale Down to Palm Size - 4G6 with Gyro and Rudder Servo
A breakthrough in RC helicopter history! 4G6 is the first Palm Size Helicopter installed with CCPM Rotor Head, a Head Lock Gyro and a Rudder Servo, this kind of equipments can only be seen on big Outdoor RC Helicopter before, now Walkera has made them so tiny to fit onto the 4G6. In the world of RC Helicopter, Tail Control is very important, a good Gyro and Rudder Servo will imrpove the helicopter stability dramatically, 4G6 features a all-in-one Receiver integrated with a Head Lock Gyro, connecting to a High Speed Rudder Servo, making the 4G6 extremely stable, feels just like a 450 class helicopter. For those who like to challenge 3D tricks? No problem. The all new Walkera WK2801-Pro Digital Transmitter allows you to adjust the Gyro Sensibility, Pitch Curve, Throttle Curve, Dual Rate or EXPO, settings made easy just like a big outdoor RC Helicopter.
For more information, please visit
www.helipal.com...

[@NoArtificialCousins]

An Advert said it's not a toy but it looks like one to me!

[@sundown798]

Check to see if the hobby shop you choose pre-flys the heli and trims before it leaves the shop to make sure everything works. Some do and some don't.

[@HeliPal]

@Thefirstbranson Make sure throttle trim on the transmitter is at lowest point before you bind.
1. Turn on transmitter, then make sure Throttle Stick and Throttle Trim are "BOTH" all the way down, rudder trimming is neutral, then turn it off.
2. Connect heli battery, the receiver will start flashing.
3. Turn on transmitter, it is flashing, do no touch anything or you will break the searching mode.
4. Do not touch

[@EuroRocket]

That remote looks high tech, I want one!

[@cabelyada]

@lazor222 i was able to install the RX-2081PRO with mini titan and it works well I just inverted the connection of aileron and pitch in the heli's two servos. and revers the ailoron in the TX 2801PRO. Thanks for replying.

[@raptorddd]

i never have the switches up just make sure you are in normal mode when starting the heli and that the thrttle hold switch is off. i dont even lower the throttle trim. i dont think its necesary.

[@cabelyada]

I have a WK 2801PRO transmitter, just want to know if this transmitter supports eCCPM mixing? because I want to buy a bigger heli "mini titan super cobra" Please advice. Thank you.

[@lazor222]

@cabelyada
This heli is eCCPM. So yes it does.

[@HeliPal]

@sundown798 We test helis before shipping to customer. You're welcome to contact us if there's any problems!

[@Kjetilaf]

OMG i forgot to switch on the controller.

[@So88er5]

@Salamalion98 Go to xheli...much better prices. :D