Note to users who upgraded: the midi channel defaulted to 1 (at least for me). I had previously set my Korg MS2000 to midi channel 16, so it wasn't talking to my iPad. A simple reset 4:05 of on my synth to match the Patchbase default of 1 got my iPad and synth talking again. Doesn't matter which you switch, the synth or the app. They just have to match.
Hey there trying to use my Alesis Micron strait up with no internet & use Irig2 from the Midi-Out to the Midi-In The IRig is receiving Midi signal that goes USB but nothing is going into the app. Most of the tutorials are about Connecting Via Bluetooth & Internet connections, Some venues do not have that easily available. is this App only delegated to the Ipad?
The app is for iPad and Mac. The Mac version is newer. You only need internet to make the purchase, but not to use the app. There's more info on debugging your MIDI setup here: coffeeshopped.com/patch-base/help/ipad/midi-setup-and-troubleshooting
@@Coffeeshopped What's the minimum required iOS version? I own iPads, but no software I look at is ever compatible with them, whereas even things written for Windows XP tend to still work fine on my PC.
@@TooSlowTube The current version of Patch Base runs on iOS 9, although soon the minimum will be iOS 11 because Apple is changing some requirements on me and won't allow further updates to iOS 9 or 10 soon.
@@Coffeeshopped Thanks. That's my problem with iOS. It seems to be designed to make older iPads obsolete. I've kept my iPad 3 on iOS7.something, but if I "upgraded" it to iOS 9, killing its performance, it would only be a useful for a short while. I should have said, I can find software written recently, that runs fine on XP too - I have an old Dell laptop that still has it on, only ever used offline. It's surprising what runs on it. Meanwhile, my iPads now only ever get used to run ClearTune, and I've given up on buying more software for them.
O.k. SO I've go a question about the coffeshopped editor I have a yamaha tg 77 and I want to edit it with an ipad Since the tg 77 midi in/out will have to be used for the editor , is there a way to trigger sounds ( note on/off's ) from the ipad's editor to the tg 77 ?
Yes, there's an in-app keyboard to play notes from within the app while you're editing. Alternatively, you could hook in an external MIDI controller. I talk a bit about that here: coffeeshopped.com/patch-base/help/ipad/integrating-with-other-midi-hardware
Yes. Top left side of the app there's a piano icon. Tap that and a small keyboard pops up at the bottom that you can use to trigger the sound you're editing.
Hey Chadwick, I'm loving the look of the new app! After spending some time away from my JV1010 I wanted to give it a try with this new update. I'm not able to fetch any data however I can play the on-screen keyboard. I'm going to global settings to change my channel (which I think is the problem) and its showing "Device #17" & every time I try to change the number the app crashes :( have you heard of this happening elsewhere / have any possible solutions? I'm looking forward to digging into the new update once I can get the devices to communicate.
Hi had PatchBase for a while now and use it for my Korg FM mainly as don’t have any other hardware synths in the list at present. I noticed in the update notes that you given a option to go down the subscription route to own all the patch base synth templates. Does this effect my Volca FM IAP or am I still able to use just what I’ve purchased without having to subscribe now. I’m away from my Synth so cannot check ?
My keyboard (MPK Mini) isn't working with the Patch Base app. I have the MPK connected with the lightning adapter, I have the TX7 with the Yamaha Bluetooth MIDI (in/out) The TX7 sounds play when I touch the pads on the app, and it comes thru my headphones plugged into the TX7, but the keyboard doesn't control anything. Help?🤔
You'll need separate software running on the iPad that routes the MIDI from your MPK thru the iPad to the TX7. See this page: coffeeshopped.com/patch-base/help/ipad/integrating-with-other-midi-hardware
Thanks for getting the app, and the kind words. Bluetooth MIDI works. WiFi should too. There are more details on that kind of setup here: coffeeshopped.com/2015/05/using-wireless-midi-to-connect-your-ipad-or-iphone-to-your-computer-and-hardware-synths If you have further questions, please get in touch via in-app support, or the Coffeeshopped website, thanks.
Hi all, I’ve managed to link it up to my D50 fine, and I can adjust faders etc on the app to affect the synth, I can also call up the synth preset to load into patch base, so midi is working both ways. But, when I try and patch dump the entire synth to a library in patch base, it just says 0 bytes of 3890 or something like that. If I wait for fifteen mins even there’s not any progress. I’m confused as the midi is working. I even tried using Better live Routings. No joy.
I am having the same issue with my JV-1080 while fetching. I am also receiving errors when performing a bulk midi dump. I am thinking it may be my interface, which is a MOTU midi express 128. These units commonly have issues handling large SysEx messages. Perhaps it's your interface?
@@howdyjulian i dont know if you sorted this, but i had the same issue with my XV5050 going through my MOTU 828mk2 via midi. Luckily i dug out my old emagic MT4 and it worked fine after that. Now im just having an issue pulling the banks and it keeping them. I'll change bank, try and pull it down, then it briefly shows the patch names then defaults back to the original bank
It really depends on the format of the bank file. But you can always load a bank file to your synth directly using something like Sysex Librarian (free), and then fetch the patches into Patch Base from there.
Having issues connecting my DX100 to iPad, I’m using the iRig MIDI 2 and I’ve followed all instructions and can’t get it to work, first time ever connecting to midi.
Coffeeshopped my big mistake was not knowing that midi in goes with midi out, and midi out with midi in.... oops! It’s working now! Sorry! And thank you for the quick response, just spend lots of cash on midi and app and I was afraid it wasn’t gonna work!
Please check the manual to make sure your MIDI setup is correct. Here is some further specific info about settings your TG33: coffeeshopped.com/patch-base-manual/yamaha-tg33. If you have further questions, please contact me via the in-app support.
There's no Device ID for Bass Station II. If you're having trouble with Patch Base setup though, please contact me via the support form: coffeeshopped.com/patch-base/support
Changes from Patch Base are sent immediately to the DX200. But the DX200 has various limitations on what can be changed in realtime. I don't remember off-hand what all the limitations are, but if you have a DX200, you can always try the app out with the free trial and see if you like it.
![MV วิถีชีวิตใต้ - ผา อัยย๊ะ [Official MV HD]](http://i.ytimg.com/vi/nODlkOUu9B0/mqdefault.jpg)
Note to users who upgraded: the midi channel defaulted to 1 (at least for me). I had previously set my Korg MS2000 to midi channel 16, so it wasn't talking to my iPad. A simple reset 4:05 of on my synth to match the Patchbase default of 1 got my iPad and synth talking again. Doesn't matter which you switch, the synth or the app. They just have to match.
Hey there trying to use my Alesis Micron strait up with no internet & use Irig2 from the Midi-Out to the Midi-In The IRig is receiving Midi signal that goes USB but nothing is going into the app.
Most of the tutorials are about Connecting Via Bluetooth & Internet connections, Some venues do not have that easily available.
is this App only delegated to the Ipad?
The app is for iPad and Mac. The Mac version is newer. You only need internet to make the purchase, but not to use the app. There's more info on debugging your MIDI setup here: coffeeshopped.com/patch-base/help/ipad/midi-setup-and-troubleshooting
Such a great app, any chance you would create a PC version?
No plans for it at the moment.
@@Coffeeshopped What's the minimum required iOS version?
I own iPads, but no software I look at is ever compatible with them, whereas even things written for Windows XP tend to still work fine on my PC.
@@TooSlowTube The current version of Patch Base runs on iOS 9, although soon the minimum will be iOS 11 because Apple is changing some requirements on me and won't allow further updates to iOS 9 or 10 soon.
@@Coffeeshopped Thanks. That's my problem with iOS. It seems to be designed to make older iPads obsolete. I've kept my iPad 3 on iOS7.something, but if I "upgraded" it to iOS 9, killing its performance, it would only be a useful for a short while.
I should have said, I can find software written recently, that runs fine on XP too - I have an old Dell laptop that still has it on, only ever used offline. It's surprising what runs on it. Meanwhile, my iPads now only ever get used to run ClearTune, and I've given up on buying more software for them.
I have a patch file from my jv-1080. Where do I put this on my Ipad so patch base will open up the patches/banks???
coffeeshopped.com/patch-base/help/ipad/importing-patches
O.k. SO I've go a question about the coffeshopped editor
I have a yamaha tg 77 and I want to edit it with an ipad
Since the tg 77 midi in/out will have to be used for the editor , is there a way to trigger sounds ( note on/off's ) from the ipad's editor to the tg 77 ?
Yes, there's an in-app keyboard to play notes from within the app while you're editing. Alternatively, you could hook in an external MIDI controller. I talk a bit about that here: coffeeshopped.com/patch-base/help/ipad/integrating-with-other-midi-hardware
Yes. Top left side of the app there's a piano icon. Tap that and a small keyboard pops up at the bottom that you can use to trigger the sound you're editing.
Hey Chadwick, I'm loving the look of the new app! After spending some time away from my JV1010 I wanted to give it a try with this new update. I'm not able to fetch any data however I can play the on-screen keyboard. I'm going to global settings to change my channel (which I think is the problem) and its showing "Device #17" & every time I try to change the number the app crashes :( have you heard of this happening elsewhere / have any possible solutions? I'm looking forward to digging into the new update once I can get the devices to communicate.
Hi had PatchBase for a while now and use it for my Korg FM mainly as don’t have any other hardware synths in the list at present. I noticed in the update notes that you given a option to go down the subscription route to own all the patch base synth templates. Does this effect my Volca FM IAP or am I still able to use just what I’ve purchased without having to subscribe now. I’m away from my Synth so cannot check ?
The update does not affect your previous purchase. The subscription is just a new option for people who want All Access.
My keyboard (MPK Mini) isn't working with the Patch Base app. I have the MPK connected with the lightning adapter, I have the TX7 with the Yamaha Bluetooth MIDI (in/out)
The TX7 sounds play when I touch the pads on the app, and it comes thru my headphones plugged into the TX7, but the keyboard doesn't control anything. Help?🤔
You'll need separate software running on the iPad that routes the MIDI from your MPK thru the iPad to the TX7. See this page: coffeeshopped.com/patch-base/help/ipad/integrating-with-other-midi-hardware
Just got it last night for Tg33 . Thanks for this piece of work ! Somehow couldn’t make it work via WiFi . Possible via Bluetooth ?
Thanks for getting the app, and the kind words. Bluetooth MIDI works. WiFi should too. There are more details on that kind of setup here: coffeeshopped.com/2015/05/using-wireless-midi-to-connect-your-ipad-or-iphone-to-your-computer-and-hardware-synths
If you have further questions, please get in touch via in-app support, or the Coffeeshopped website, thanks.
Coffeeshopped thank you . Will try again
Hi all, I’ve managed to link it up to my D50 fine, and I can adjust faders etc on the app to affect the synth, I can also call up the synth preset to load into patch base, so midi is working both ways. But, when I try and patch dump the entire synth to a library in patch base, it just says 0 bytes of 3890 or something like that. If I wait for fifteen mins even there’s not any progress. I’m confused as the midi is working. I even tried using Better live Routings. No joy.
I am having the same issue with my JV-1080 while fetching. I am also receiving errors when performing a bulk midi dump. I am thinking it may be my interface, which is a MOTU midi express 128. These units commonly have issues handling large SysEx messages. Perhaps it's your interface?
@@howdyjulian i dont know if you sorted this, but i had the same issue with my XV5050 going through my MOTU 828mk2 via midi. Luckily i dug out my old emagic MT4 and it worked fine after that. Now im just having an issue pulling the banks and it keeping them. I'll change bank, try and pull it down, then it briefly shows the patch names then defaults back to the original bank
The random function doesn’t seem to work with my Korg2000R, there is no sound. What I am doing wrong?
Got it working from my ipad...how do I have my midi keyboard triggering as I edit?
coffeeshopped.com/patch-base/help/ipad/integrating-with-other-midi-hardware
Will you be adding the Roland Jupiter XM to this?
Hopefully at some point. I recommend voting for it here: coffeeshopped.com/patch-base/vote
Would access virus C editor work for virus B/indigo?
Stupid question, can I use this to download commercial patch banks, or do they all use Windows only?
It really depends on the format of the bank file. But you can always load a bank file to your synth directly using something like Sysex Librarian (free), and then fetch the patches into Patch Base from there.
@@Coffeeshopped thank you!
Can i save what i did in the editor into the hardware?
I mean, without export a file. Can i just save from the software into the device?
Yes, you can. Check out this video for more info on that: th-cam.com/video/ezmkpVjfpWI/w-d-xo.html
Having issues connecting my DX100 to iPad, I’m using the iRig MIDI 2 and I’ve followed all instructions and can’t get it to work, first time ever connecting to midi.
We can get it resolved. Please contact me via my website: coffeeshopped.com/contact
Coffeeshopped my big mistake was not knowing that midi in goes with midi out, and midi out with midi in.... oops! It’s working now! Sorry! And thank you for the quick response, just spend lots of cash on midi and app and I was afraid it wasn’t gonna work!
Hi, is there a way to see controller changes I make at the hardware in the editor in realtime?
Not at the moment.
Hi I just purchased for TG33 . Somehow he doesn’t react to my changes on iPad ...
Please check the manual to make sure your MIDI setup is correct. Here is some further specific info about settings your TG33: coffeeshopped.com/patch-base-manual/yamaha-tg33. If you have further questions, please contact me via the in-app support.
How do I find the device ID for say a Bass Station II?
There's no Device ID for Bass Station II. If you're having trouble with Patch Base setup though, please contact me via the support form: coffeeshopped.com/patch-base/support
Does it allow real time control of params in DX200 ?
Changes from Patch Base are sent immediately to the DX200. But the DX200 has various limitations on what can be changed in realtime. I don't remember off-hand what all the limitations are, but if you have a DX200, you can always try the app out with the free trial and see if you like it.
3:25 there’s no article linked...
Thanks! Just added the link in the description.
Would love this for the virus ti snow
Working on it. ;)
@@Coffeeshopped I bought it in anticipation for this. Also I am seeing the mopho but not the dsi tetra =(
@@junglestar Yep, no Tetra support yet.