Your wheel hop is from the stock toe links/trailing arms. I have a 2012 2SS, it isn't cammed, I run a 125 shot and a 3200 stall. If you haven't yet, at some point you will break an axle from it, if they are still stock. Once you start cutting 1.5X 60' times, the differential is on borrowed time as well. I'd recommend the Eaton true-trac, and may as well swap the gear if you haven't already. 391 was good for about a tenth and a half. After breaking the passenger axle, I put 1000 hp rated axles on. No problems since. Car runs 7.0X to 7.3X depending on prep. MT ET Street R are the best hooking drag radials that you can drive to the strip with, just don't get caught in the rain.
Yea bro I fixed the wheel hop with the bmr toe rods and bmr trailing arms also threw in bmr bushings and with the rear end I built it a good while back but a trutrac with 3.73 gears bro and yea I did brake an axel but wasn’t due to wheel hop my car was lowered and the axel angel was all wrong but I have everything figured one been trying to go to the track to make more content but tracks been playing me
When I had the 17 forgstars I didn’t have a problem with it running my control arm but it did run on a bolt fro the sway bar so I just shaved that down
I just got my dream car 2013 2ss love the videos
You gonna love the car bro! And I appreciate it bro!
Hell yea bro good ish! 💪🏽😎
Appreciate it bro now I gotta order some bmr stuff and stop it from wheel hoping
@@choppinss5552 awesome bro best of luck to your built and keep these awesome camaro videos coming!
Your wheel hop is from the stock toe links/trailing arms.
I have a 2012 2SS, it isn't cammed, I run a 125 shot and a 3200 stall.
If you haven't yet, at some point you will break an axle from it, if they are still stock.
Once you start cutting 1.5X 60' times, the differential is on borrowed time as well.
I'd recommend the Eaton true-trac, and may as well swap the gear if you haven't already.
391 was good for about a tenth and a half.
After breaking the passenger axle, I put 1000 hp rated axles on.
No problems since. Car runs 7.0X to 7.3X depending on prep.
MT ET Street R are the best hooking drag radials that you can drive to the strip with, just don't get caught in the rain.
Yea bro I fixed the wheel hop with the bmr toe rods and bmr trailing arms also threw in bmr bushings and with the rear end I built it a good while back but a trutrac with 3.73 gears bro and yea I did brake an axel but wasn’t due to wheel hop my car was lowered and the axel angel was all wrong but I have everything figured one been trying to go to the track to make more content but tracks been playing me
Always been a Mopar guy had 5.7 6.4 but man those 6.2s are best bang for your buck. Might have to switch to Chevy
Specs of the back wheels and tires man!?
What was your PB?
Which wheel size are you running on your 5th Gen camaro ?
20x9 I’m the front 17x10 in the rear
I got 17’s forgestars in the back on my 2010 2ss and the lower control arm is hitting on the wheels any suggestions!?
If it’s not to bad you can try and shave it a bit bro
When I had the 17 forgstars I didn’t have a problem with it running my control arm but it did run on a bolt fro the sway bar so I just shaved that down
besides the actual seat, what all did it take to get that kirkey in there?
Nothing much everything else could stay the same seat just drops in
@@choppinss5552 no bracket? Do you mind sending the link to that same seat or nah
www.plantedtechnology.com/products/seat-brackets/chevrolet/planted-seat-bracket-chevrolet-camaro-excluding-zl1-2010-2015-driver-left.html
www.jegs.com/i/Kirkey/570/55170K/10002/-1?gclid=CjwKCAiAh_GNBhAHEiwAjOh3ZCdjcLSU8r1pcvVX_UmA_-vvWz60rF5w6G1jyStLeqKNeiXACf92PRoCq54QAvD_BwE
You would still have to buy the harness bar and harness of your choice or you can run factory seat belt
@@choppinss5552 appreciate it homie
How much hp is that beast
450 to the wheel!
What are your times...I have a cammed Camaro as well
Fastest I’ve gone is 7.401 to the 1/8 no spray but ima try beat that this Sunday
@@choppinss5552 Thanks man
What stall do I have I'm looking at upgrading my 3200
I have a circle d 3800
@@choppinss5552 Nice that's what I'm looking at online right now
What’s your current set up on the car ?
@@choppinss5552 Fbos with Frankenstein Stage 2 ported heads custom grind cam 3200 stall 391 gears and a Forgstar drag pack going on in the spring.
That’s bad ass bro I can’t wait to get my heads done