Worked like a charm, difficult to get it to spin .... broke off the little flanges but managed to get it out with some lube and a bit of hammer with screwdriver once out it was a done deal snapped in place ....done no leaks thanks again
Hello Janette, if you fing the right size o-ring , then you can. As far as I know, Grohe doesn't stock the o-ring as a spare part, but the entire hose is available
I have a grohe bathroom sink faucet with the supply line connecting to the water inlet broken, can I make a replacement of the supply line instead of the whole thing.
I bought the grohe bathroom faucet and found the connector to the water inlet is too small, stating 9/16”, is there extension cord or converter from grohe that can change to larger connection should be around 10/16”.
I tried to follow your instructions for removing a 46.413 supply line that is recessed into the bottom of a Europlus 33.939 kitchen faucet by rotating the tabs counter clockwise but could not get it out. Can you please be more explicit?
Hello Leonardi, unfortunately, the supply line for concetto is not avaiable anymore. I will suggest to contact Grohe Canada for the entire faucet replacement if you are the original owner with the proof of purchase.
Worked like a charm, difficult to get it to spin .... broke off the little flanges but managed to get it out with some lube and a bit of hammer with screwdriver once out it was a done deal snapped in place ....done no leaks
thanks again
Thanks guy will give it a shot
It worked exactly as you described thank you. is it possible just to replace the O ring?
Hello Janette, if you fing the right size o-ring , then you can. As far as I know, Grohe doesn't stock the o-ring as a spare part, but the entire hose is available
I have a grohe bathroom sink faucet with the supply line connecting to the water inlet broken, can I make a replacement of the supply line instead of the whole thing.
I bought the grohe bathroom faucet and found the connector to the water inlet is too small, stating 9/16”, is there extension cord or converter from grohe that can change to larger connection should be around 10/16”.
Hello Albert, sorry for delayed reply. Do you know the model number? If so, please let me know, so that I can double check for you
I tried to follow your instructions for removing a 46.413 supply line that is recessed into the bottom of a Europlus 33.939 kitchen faucet by rotating the tabs counter clockwise but could not get it out. Can you please be more explicit?
Hey Jeffrey, just need to keep pushing the tabs counterclockwise until the hose screws itself off. I have to admit it is time comsuming job
i got broken cold supply line for grohe concetto, is there any part number available for it ? it's about 60cm in length as i recalled
Hello Leonardi, unfortunately, the supply line for concetto is not avaiable anymore. I will suggest to contact Grohe Canada for the entire faucet replacement if you are the original owner with the proof of purchase.
A video demonstration: th-cam.com/video/JEhBcLEsD_U/w-d-xo.html