The delay trick is great for thickening up the tone and giving it a double tracked feel/tone. Now I don't feel it's quite as necessary to always use dual amps.
How do i save my patches? When i transfer them over onto the preset lists they are fine. When i close it down and reopen the patches are gone again 😰 Just new to these pedals. Any help appreciated. Thank you x
I’m having trouble with moving patches to my HD500x it only lets me do it once example. I drag a patch to 1a. Then I drag another patch to 2a. But it goes to 1a again. What am I doing wrong? Thank you for your help
Jim Penz Hi Jim, Actually I think you can just drag and drop the bean patches into the HD500 Edit screen and they will load. I've heard of people doing that and it works. Send me a PM if you want.
Hi Glenn, my Vox Tonelab SE finally died and I'm need to buy a new unit ASAP because we have a gig on the 22nd. I run direct into the PA and play country and 80's rock, do you have a unit you would recommend? I will be downloading your patches for sure, awesome stuff!!!
Hmmm, I think either the HD500X or the GT-100 would be a good choice but you should at least try both to see how you like the GUI on each unit. Don't just take my word for it.
Hi Glenn, great videos on the Line 6 gear. I do have a question regarding patches. Im running a pod Hd Pro X for my home studio. I am looking into getting something like a Spider IV 120 or a Spider valve Mkii for jamming or gigging. With the Pod hd pro X Edit software , im wondering how you can go about using the same patches for the Hd Pro x and the Spider series. Or is there any Line 6 amp that will work with the Pod Hd Pro X patches. Thanks from Australia :-)
You'd probably want something that is a very flat response like a Friedman ASM 12 or something like that. The only I would it with a Spider would be to go into the FX return totally bypassing the preamp of the spider. You wouldn't want the HD Pro ruining into the Preamp of the spider.
ok cool. I was hoping that the patches I have built into the Pod pro X and the patches I have gotten from the Line 6 community could simply be dropped and dragged from the pod hd pro x edit to something like the Spider Iv edit. I have found some really cool tones that im stoked with but when I try and the drop / drag method its like the spider iv edit doesn't read it, or should I simply buy another pod hd pro or pro x just so I can use the same patches on each unit
Glenn, I downloaded your custom patches...They sound great on my computer but they don't when I play them through my amp...I'm using a DT50...I'm using a Les Paul with Zac Wylde pickups and a Strat with Lace Sensor pickups...I've tried them with the L6 Link and into the front of the amp...Any help and advice would be appreciated
Thank you very much. All you have to do is disable that quick delay in the amp block I have. Also you might try switching to Combo Front out mode, That gives you a global EQ that can help shape your sound. It's really hard to have the same patches that will sound good going direct and into an amp at the same time. That's why I had to develop different sets of patches for use with an amp.
hey Glenn, I have little bit problem here.. when I plug my pod hd500 via usb to my laptop as what you instructed at 2:53 , my laptop didn't recognized it. do you have any solution? I've tried alot of things, but my laptop still can't recognized the pod hd500. looking for your answer ;)
You have to have the driver installed on your laptop or it won't recognize the HD500. Go to Line 6 site and get the driver for your unit and operating system and install it. Then try hooking it up again after you have installed the driver. It should work then.
HI Glenn .. download some of your patches, metal riffs etc, am I doing something wrong because they don't sound right at all ... an example is the disturbed patch - it only had 3 effects on it .....im using the 4 cable method, im sure its my set up ..... I am dragging and dropping as per your tutorial and that works fine .... a bit stumped at the moment ... any advice.
Hi Mike Thank you. I think that's right on the disturbed patch. Not many effects. Are you saying the amp model is not on?? If that's the case then it means you need to update the POD because thes presets are using the last POD update 2.0 which added a couple more models. My disturbed patch may be using a new model that does not exist in your POD unless you are running the 2.0 firmware. Could this be the problem??
***** thanks for the reply Glenn much appreciated ....I'm running the HD500 - All firmware etc is up to date.... Should I expect the same sound as per your video?? the patches I downloaded seem to work, they just sound real trebly no "balls" to them if you know what I mean.... I'm running a blackstar 6L6 100w head and a Mesa Rectifier Cab ... happy to take this offline - my email is maxcimus69@bigpond.com thanks Mick ...
Glen, I am a worship leader and guitar player for contemporary gospel music. Do you have any patches from well known gospel guitar players such as Lincoln Brewster and other player of the same type music? Would love to download these patches if they exist on your site.
+Marc Cerrato Pretty much the same just different software. First thing is to install the drivers from boss onto your computer and then the Tone Studio software and then connect the ME-80.
I downloaded the zip files and it try's to open them with adobe and I don't no any other way to open your files to transfer them to the boss? So this is not so easy for me. I don't know what to do to open these files correctly?
+Marc Cerrato You first have to go to the Boss website and download and Install the ME-80 drivers and then the Tone Studio software. Then once that is done you can hook up the ME-80 and you Import the file that is in that zip file you downloaded.
Henri I'm sorry but I am not affiliated with Line6 in any way therefore I can't offer Line6 Tech Support. You would do much better by going straight to the Line6 Forums. There are many many knowledgeable people who can help you.
I'm using line 6 pod hd 400 , after following these steps and updating the firmware, driver, flash and puting patches from editor my line 6 has no sound anymore , my cables are new, my guitar is good when i play on a direct amp, help what should i do to my line 6
+Marc Cerrato OK then follow my directions!! in the Tone studio window you select "Import" and navigate to the ".tsl" file in the Zip file you downloaded and import it and that will load the patches into the Tone Studio. From there you can load them into the ME-80.
+Marc Cerrato OK good, now when you hook up your ME-80 and you see that your computer recognizes it, Then you open the Tone Studio software and it will see the ME-80. Then in the Tone studio window you select "Import" and navigate to the "tsl" file in the Zip file you downloaded and import it and that will load the patches into the Tone Studio. From there you can load them into the ME-80.
![ปฏิเสธไม่ไหว (Crush on you) - LIPTA feat. No One Else [TEASER MV]](http://i.ytimg.com/vi/VC689EgdSIw/mqdefault.jpg)
Thanks Glenn !! I'm loving my patches
Can't wait too see what you have in store for us !!
thank you for the patch drag and drop info.
Thanks for all your help I'm getting the 50th soon, I have the pod pro but like the new foot switch set up better, looking forward to mor tutorials
Thanks Glenn... great video. I'll be looking forward to downloading some of your tone patches in the near future.
Thank you very much
thank you very much, your video helped me a lot, I watched almost all the video, but it was yours that was effective
The delay trick is great for thickening up the tone and giving it a double tracked feel/tone. Now I don't feel it's quite as necessary to always use dual amps.
How do i save my patches?
When i transfer them over onto the preset lists they are fine. When i close it down and reopen the patches are gone again 😰
Just new to these pedals.
Any help appreciated. Thank you x
I'm having the same issues.
Same issue here
I’m having trouble with moving patches to my HD500x it only lets me do it once example. I drag a patch to 1a. Then I drag another patch to 2a. But it goes to 1a again. What am I doing wrong? Thank you for your help
It is showing pod farm but it is refusing to update, we can i get pod farm
Good job! You explained it very clearly.
Thank you
Hello! Does this still work in 2023?
Good job Glen!!!
I'm a fan!!!
Hi Glenn - Great Tones. I have a HD POD HD Bean and a HD500 floor. Can I use the patches for both devices?
Jim Penz Hi Jim, Actually I think you can just drag and drop the bean patches into the HD500 Edit screen and they will load. I've heard of people doing that and it works. Send me a PM if you want.
Will patches for hd400 will work on hd 300 ?
no unfortunately not.
Greetings, can you please help me with pod hd 300 volume pedal for sweells and ambient i don't know how to adjust my volumes.
watch this video. This is for the POD HD500 but you can do the same thing with the HD300
Hi Glenn, my Vox Tonelab SE finally died and I'm need to buy a new unit ASAP because we have a gig on the 22nd. I run direct into the PA and play country and 80's rock, do you have a unit you would recommend? I will be downloading your patches for sure, awesome stuff!!!
Hmmm, I think either the HD500X or the GT-100 would be a good choice but you should at least try both to see how you like the GUI on each unit. Don't just take my word for it.
***** Thank you so much, I'll be getting one in the next few days and buying your patches. Thanks for all your TH-cam videos, they are awesome!
Nice video bro thanks for sharing
Hi Glenn, great videos on the Line 6 gear. I do have a question regarding patches. Im running a pod Hd Pro X for my home studio. I am looking into getting something like a Spider IV 120 or a Spider valve Mkii for jamming or gigging. With the Pod hd pro X Edit software , im wondering how you can go about using the same patches for the Hd Pro x and the Spider series. Or is there any Line 6 amp that will work with the Pod Hd Pro X patches. Thanks from Australia :-)
You'd probably want something that is a very flat response like a Friedman ASM 12 or something like that. The only I would it with a Spider would be to go into the FX return totally bypassing the preamp of the spider. You wouldn't want the HD Pro ruining into the Preamp of the spider.
ok cool. I was hoping that the patches I have built into the Pod pro X and the patches I have gotten from the Line 6 community could simply be dropped and dragged from the pod hd pro x edit to something like the Spider Iv edit. I have found some really cool tones that im stoked with but when I try and the drop / drag method its like the spider iv edit doesn't read it, or should I simply buy another pod hd pro or pro x just so I can use the same patches on each unit
By the way Line 6 gear rocks - I really dig their stuff :-)
Great video.
Glenn, I downloaded your custom patches...They sound great on my computer but they don't when I play them through my amp...I'm using a DT50...I'm using a Les Paul with Zac Wylde pickups and a Strat with Lace Sensor pickups...I've tried them with the L6 Link and into the front of the amp...Any help and advice would be appreciated
Thank you very much. All you have to do is disable that quick delay in the amp block I have. Also you might try switching to Combo Front out mode, That gives you a global EQ that can help shape your sound. It's really hard to have the same patches that will sound good going direct and into an amp at the same time. That's why I had to develop different sets of patches for use with an amp.
Any chance you have any Richie Sambora patches for the 500
hey Glenn, I have little bit problem here.. when I plug my pod hd500 via usb to my laptop as what you instructed at 2:53 , my laptop didn't recognized it. do you have any solution? I've tried alot of things, but my laptop still can't recognized the pod hd500. looking for your answer ;)
You have to have the driver installed on your laptop or it won't recognize the HD500. Go to Line 6 site and get the driver for your unit and operating system and install it. Then try hooking it up again after you have installed the driver. It should work then.
oh it works! thank you very much Glenn! really help me alot
Glenn any hints on what you have in the works ?
Wonderful
HI Glenn .. download some of your patches, metal riffs etc, am I doing something wrong because they don't sound right at all ... an example is the disturbed patch - it only had 3 effects on it .....im using the 4 cable method, im sure its my set up ..... I am dragging and dropping as per your tutorial and that works fine .... a bit stumped at the moment ... any advice.
Hi Mike Thank you. I think that's right on the disturbed patch. Not many effects. Are you saying the amp model is not on?? If that's the case then it means you need to update the POD because thes presets are using the last POD update 2.0 which added a couple more models. My disturbed patch may be using a new model that does not exist in your POD unless you are running the 2.0 firmware. Could this be the problem??
***** thanks for the reply Glenn much appreciated ....I'm running the HD500 - All firmware etc is up to date.... Should I expect the same sound as per your video?? the patches I downloaded seem to work, they just sound real trebly no "balls" to them if you know what I mean.... I'm running a blackstar 6L6 100w head and a Mesa Rectifier Cab ... happy to take this offline - my email is maxcimus69@bigpond.com
thanks Mick ...
Glen, I am a worship leader and guitar player for contemporary gospel music. Do you have any patches from well known gospel guitar players such as Lincoln Brewster and other player of the same type music? Would love to download these patches if they exist on your site.
Glen
I have a Pod X3.
Do you have a list of the patches your selling?
Yes I sure do. Here is a link to the patch List
glenndelaune.com/X3-Patch-List.jpg
*****
Thanks, Glenn
Will you be doing any Line 6 Amplifi patches in the future?
I have a Mac OS Catalina...it's not listed...now what??
Is this method the same for the boss me 80? New at this. Any help or instructions would be great.
thanks!
+Marc Cerrato Pretty much the same just different software. First thing is to install the drivers from boss onto your computer and then the Tone Studio software and then connect the ME-80.
Have you a Santana style patch fo HD500X ? TY
I downloaded the zip files and it try's to open them with adobe and I don't no any other way to open your files to transfer them to the boss? So this is not so easy for me. I don't know what to do to open these files correctly?
+Marc Cerrato You first have to go to the Boss website and download and Install the ME-80 drivers and then the Tone Studio software. Then once that is done you can hook up the ME-80 and you Import the file that is in that zip file you downloaded.
I downloaded your patches for the line 6 x3 live. What other programs do I need on my computer to load the patches on it? My OS is windows 10
Thank you Russell. Well you'll need the software from Line 6. I think it's called Gearbox. You can find it on their website.
this is such a great tutorial thank you so much man
Can you please help me with worship, presets
Hi. I have a question. If my DSP is full, what can I do to add more patches?
You would have to remove something to get more dsp back.
Will I need the Line 6 downloader....I've tried several times and I can't download it.
No for this unit you need something called the Line 6 Monkey. It's like an early version of the no Line 6 Updater.
Cant get the flash memory to update can u help me? its a POD HD500x
Henri I'm sorry but I am not affiliated with Line6 in any way therefore I can't offer Line6 Tech Support. You would do much better by going straight to the Line6 Forums. There are many many knowledgeable people who can help you.
Now the last question is how do I replace the patch files I already programed in with the new patch files?
Is their any possibility that we convert the pod 500x tones into podx3 live ?
Can these patches be used with podfarm 2.5?? If yes I will buy them all right now lol
Unfortunately No they will not work in Pod Farm
how to I use your patch for live perform?
I'm using line 6 pod hd 400 , after following these steps and updating the firmware, driver, flash and puting patches from editor my line 6 has no sound anymore , my cables are new, my guitar is good when i play on a direct amp, help what should i do to my line 6
Make sure the input is set to guitar and not mic or variax.
I face the same problem....what's the solution?
Does it actually save to the pod or does it only load the patch when plugged into a pc
Yes you can actually save these to your POD Unit.
09:55 transfer patches from computer onto Pod itself
just order one of your bundles but cant open can you help me my name Is mario
You have to unzip the download file to load them. Thank you Mario
Patch Updates?
0:20
i need console ?
the boss studio is opened
+Marc Cerrato OK then follow my directions!! in the Tone studio window you select "Import" and navigate to the ".tsl" file in the Zip file you downloaded and import it and that will load the
patches into the Tone Studio. From there you can load them into the ME-80.
I already did that
+Marc Cerrato OK good, now when you hook up your ME-80 and you see that your computer recognizes it, Then you open the Tone Studio software and it will see the ME-80. Then in the Tone studio window you select "Import" and navigate to the "tsl" file in the Zip file you downloaded and import it and that will load the patches into the Tone Studio. From there you can load them into the ME-80.
Thanks for all your help I'm getting the 50th soon, I have the pod pro but like the new foot switch set up better, looking forward to mor tutorials