RV Water Damage Repair: Demo Day 16 Floor Repair
ฝัง
- เผยแพร่เมื่อ 9 ก.ค. 2023
- Find the tools/supplies I use at www.amazon.com/shop/fallenint...
Book a consultation: www.fallenintocamping.com
Connect with me: linktr.ee/fallenintocamping
#rv #rvlife #rvrenovation #rvrepair #rvmaintenance #rvliving #rvtravel #rving #woodworking #woodworker #diy #howto #rvhacks #ac #acunit #rvaccessories #rvupgrades #heat #cooling
Disclaimer
Updated October 1, 2020
The information provided by Fallenintocamping LLC ("we," "us," or "our") on www.fallenintocamping.com or (
/ @fallenintocamping (the "Site") is for general informational purposes only. All information on the Site is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on the Site. UNDER NO CIRCUMSTANCE SHALL WE HAVE ANY LIABILITY TO YOU FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE OF THE SITE OR RELIANCE ON ANY INFORMATION PROVIDED ON THE SITE. YOUR USE OF THE SITE AND YOUR RELIANCE ON ANY INFORMATION ON THE SITE IS SOLELY AT YOUR OWN RISK.
EXTERNAL LINKS DISCLAIMER
The Site may contain (or you may be sent through the Site) links to other websites or content belonging to or originating from third parties or links to websites and features in banners or other advertising. Such external links are not investigated, monitored, or checked for accuracy, adequacy, validity, reliability, availability, or completeness by us. WE DO NOT WARRANT, ENDORSE, GUARANTEE, OR ASSUME RESPONSIBILITY FOR THE ACCURACY OR RELIABILITY OF ANY INFORMATION OFFERED BY THIRD-PARTY WEBSITES LINKED THROUGH THE SITE OR ANY WEBSITE OR FEATURE LINKED IN ANY BANNER OR OTHER ADVERTISING. WE WILL NOT BE A PARTY TO OR IN ANY WAY BE RESPONSIBLE FOR MONITORING ANY TRANSACTION BETWEEN YOU AND THIRD-PARTY PROVIDERS OF PRODUCTS OR SERVICES.
AFFILIATES DISCLAIMER
The Site may contain links to affiliate websites, and we receive an affiliate commission for any purchases made by you on the affiliate website using such links. Our affiliates include the following:
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn advertising fees by linking to Amazon.com and affiliated websites. - แนวปฏิบัติและการใช้ชีวิต
![[UNCUT] “เชื่อมจิต” ใกล้จนมุม อนันต์ชัยเปิดตัวละครลับ เตรียมล้างบาง I คนดังนั่งเคลียร์ l 2 ก.ค.67](http://i.ytimg.com/vi/jeOwG0vt114/mqdefault.jpg)
I have done that extensive of repair, not easy and a lot of work. Good for you, nice job
Damn impressive. Haven’t had to do a floor yet but I know I will. It’s just a matter of time.
Very informational. Exactly what I'll have to be doing with my camper... Has roof damage and floor damage with some slide damage.
She did really great job 😊❤
Great job and very interesting on how the floors are built👊🙏😁🇺🇸😎
More than likely, you’ve already remade this better than factory ! I wish I could move and get thru tasks this fast 😅
Yes! Finally the floor! 😊 I have been waiting for this day as I am rebuilding the floor of my 2002 Trail-Cruiser. I was also trying to decide how to get the new underbelly installed and I was thinking from underneath but that would be hard. My issue is that camper doesn't have the supports from the steel frame to the bottom edge of the aluminum frame. You mentioned that you used bolts instead of screws, were those lag bolts? Great rebuild series btw!😁👍❤
Is yours an all wood frame? Technically they are self drilling metal screws, so I add the washer so they don’t sink into the wood too far, but I would consider them a lag bolt (just self drilling 😂)
Ah yes, self drilling screws are wonderful!😃 No, my camper frame is aluminum with only the front-end piece having wood inside as there is a 2x4 sized wood in between that and the front shell. That wood was rotted out as well as the whole floor from the front to the beginning of the fender. The previous owner sandwiched a sheet of 1/2" ply using angle steel under the middle section.😅
I have done this also with the aluminum/foam sandwich. It was impossible to get the strength back without welding more cross beam supports to the frame. Just a little info incase you come across a keystone ultralite rv.
Fast shoes getting it done
It would make it easier for it to be a full-time live in camper. If you put the tarp on plywood and then insulation in between the new floor, Joyce’s you put in
It surprise me how skilled you are in this type of work also how hard you work, and the floor, is weird now for me knowing there is almost nothing there , I tough one of my old trailers have a metal plate underneath, I just ck a never one that I have to replace 3 by 6 feet in the floor, is like this, nothing but the plastic there.
Dang. Lot O work.
And if people are wanting to do it with the actual claimant, it’s basically the same thing it’s just not a tarp and you can also use Tyvek instead of that and just glue the seams together and go like that I’m doing the same as she’s doing on a 1976 shyster camper all I can say though is they don’t make them like they used to
What kind of bolts did you use to secure the wood frame pieces to the aluminum?
Hey Heather, Thanks for all the videos , I think I've watched them all. I looked and can;t seem to find the link to the tarp that you used as an underlayment. Could you please let me know where I can get it ? Thanks
Sorry, I must have forgot to include that in the water damage repair supplies list on Amazon, I’ll post the link below!
a.co/d/gBglCCn
@@fallenintocamping Thanks
Does this mean the original joists were rotten and so you made new support beams ?
There were no original joists, the floor was made of foam and 1/4 inch plywood glued together
This don’t seem solid to me. On the sides you didnt use a sandwich(tarp/floor/frame/subfloor) structure? You layerd tarp/frame/floor. From the bottom this is going to feel soft.
The bottom has a weatherproofing underbelly, so you won’t ever see or feel it unless you take the underbelly off. Sandwich is only necessary when you have a foam core (in that case, rv manufacturers sandwich 1/8 inch luan between 1 inch foam). Feel free to repair however you see fit-it’s your trailer, so do what makes you feel comfortable.
@@fallenintocampingbut it still going to feel like a cushion. A rat could bite in it easily
Then come do mine
YOU HAVE TO BE A BALANCE BEAM ATHLETE
So impressed with myself that I didn’t fall through 😂😂😂