I am so glad I waited until the end of the video... That is a very clever gadget. It was not the thing I expected to see at the beginning of the video. Nice work!
@@keithclark486 I guess you're a little slow. PYTSD is post youtube stress disorder after a useless video. But M&M and R??? Doubt anyone gets that one. So.....
That will destroy the paint/finish on the door as well as slowly wear a groove into any wood it touches. 10/10 for creativity, -274917592/10 for practicality and a clickbait title.
Vinyl-coated cable would be less harsh on the door’s finish. Preventative maintenance plan could be applying some sort of lubrication to prolong life of the surface.
great idea and looks fun to produce however... a little over-engineered for that purpose!😅 There looked to be absolutely no force on the clamps at all! I must be missing something
I might not have but I've helped rebuild a fence before the guy couldn't see the drill holes he made in the concrete for to put those ankor things in that you can then screw a screw into or nut and bolt either one to bolt down the fence I liked those ankor things there useful and solid once you hammer them into to holes in the concrete
Those knit gloves get snagged by the grinder and it's a LOT worse injury than no gloves at all, at least you can pull away. Next time use leather gloves, not kit gloves!
Worker DIY, I can understand you wanting to share a clever project like this and post the video, but after reading all the random-ass comments and chatter below...I'm not sure it's worth it.
Personally I hate videos like this that require you to watch it to the end to see if it's even worth your time. Show me 5 seconds of the finished product. Then show me how to do it.
Why not just buy a sliding door look Colton Home Depot so much Easter in more way than one. Who is gonna have the time or patience to carry a Alan wrench around with them . Wow some people’s kids
Have you ever thought of just using a spring instead of this complicated bullshit?? Some people just have to make simple things complicated for absolutely no reason.
Don’t wish to criticise but if you ground your centre punch back at 60-70 degrees then ground a point on it at 45-50 degrees it would be much easier to see what your doing ,plus use a pilot drill to start your holes instead of drilling straight through with the larger drill bit gives far better results eg much rounder holes ,easier to drill and you don’t get such a severe breakthrough and risk snapping the drill bit ,a variable speed drill would be better much more control otherwise ,ok for use in the outside shitter I guess but needs prettying up if your ever going to get it market
But not if you know what you are doing, little bit of pressure at a time Will Make the difference have 40 yrs + doing this type of work patients is the key to keeping safe,to all be safe.
Cool product, but.... So, is this a training video on everything you should NOT do to be safe, create quality and professional results? Literally every second of this video shows exactly how not to do it the right way.
You have got to be hitting me. They sell hinges with Springs inside of them for this very purpose and you didn't have to waste anybody's time or money or energy in making this worthless piece of junk click baiting sob. The end of the wire rope is stuck in the end of one of the set screws in the thumb nail and that's not even what you made.
Thank goodness for fast forwarding.
I am so glad I waited until the end of the video... That is a very clever gadget. It was not the thing I expected to see at the beginning of the video. Nice work!
Yes it took a turn l certainly wasnt expecting but was pleasently surprised when he finished. Very Cool Work !!!!
It’s cool however it’s too much work and looks ugly and it’s cheaper to buy a spring one
"you've never seen THESE wire rope ideas"
.........
Proceeds to show ONE idea. 🤦♂️
Fancy work 👍
I love it. It's perfect for the job. Thanks for sharing.
Good idea, must be watched at 10x speed
Simply awesome. So simple it made me chuckle.
I must say that I have seen that before as a child, and I have forgotten about it, thank you for the reminder👍
Why would you not show the two styles you show in the thumbnail?
Very disappointed of end result. I want that 5 and a half minutes of my life back.
Dude, there's a slider, and 2x speed options plus ff tap. Who waits and watches??????
5 and 1/2 minutes won't help you.
@@keithclark486 That bad huh? Oh the PYTSD.
@@markmurto
Are you a little M&M and R ?
@@keithclark486 I guess you're a little slow. PYTSD is post youtube stress disorder after a useless video. But M&M and R??? Doubt anyone gets that one. So.....
Pretty slick
Bravo
Thank you.
I love the rooster in the background.
Great!
All good and well. But the sad reality is, there's a spring based version of this on the market already.
I know. But this is pretty clever.
And cost how much? You don't comprehend bring a man do you
People pay a ton more for this stuff. You have no idea. Random junk and they want it.
Thank you!!!!!!! ……ever in vegas I’ll buy you a beer for common sense!!!!!!!
Is this acting like a spring? 0
Cool !!
I use locking-grip pliers to hold the piece I’m sanding down with the angle grinder instead of just hands and gloves.
That's not something that someone named Crazy Rabbit would do. Hold it with your teeth!
The glove is an upgrade from my norm.
@@willtaylor4084 lol!
That system has been around decades, we call them queeny springs, used to close gates.
Good video thank you 👏👏👏
Именно то видео, в котором можно посмотреть только финальную и на остальное не тратить время.
Good 👍👍👍
, super klass kryto 👍👍
До конца видео думал, что это вместо цепочки на дверь ;)
What good did that do
Oh. Its a torsion spring. Get a spring hinge. $2
Isn't there spring loaded hinges that do this?
Cool
👍👍👍😜🏴🦕😁🤞✌
You should invest in a bench top drill press and a drill press vice !
Cool
I could find more uses for what was in the thumbnail
These comedy parodies are pretty funny.
Perfect. I was looking for something to close a door after my dog leaves it open. This is a great idea.
Me too, my dog is trying to freeze me.
@@SW-ii5gg haha exactly that!!
You can buy a spring one which is cheaper and you don’t have to do all that work and looks better
I bet he leaves the toilet seat up as well?
@@subaruthug nah he shits on the carpet!
1 Bohren ( светлить)
2 Anfasen ( фазу)
3 Gewinde ( резбу нарезать)
I love hearing the rooster in the background
Мне больше нравятся устройства с грузами. Усилие не зависит от угла, на который дверь открыли.
That will destroy the paint/finish on the door as well as slowly wear a groove into any wood it touches. 10/10 for creativity, -274917592/10 for practicality and a clickbait title.
Vinyl-coated cable would be less harsh on the door’s finish. Preventative maintenance plan could be applying some sort of lubrication to prolong life of the surface.
Thats a lot of work just to shut a door.
It's nice work but I'm puzzled at what's it for?
What a waste of time, click bait.
And how strong is the wood?
But good job.
Making a big job out of a trivial problem. A couple of plates screwed to the door would have clamped the cable just fine
I didn't get it. Why would you want that on a cupboard door or any door?
You might think about a drill press and some tooling?
One idea? Ideas should indicate more than one. I'm not that impressed. This idea has been around for decades.
I was thinking big deal I can lock a door with a chain
Then bam it's a fricking hinge right on man
Pro tip. Put this on the hinge side of the door. Just sayin. 😖
For $8 get spring type for the shops
Не знает, что когда нарезаешь резьбу, нужно место нарезки обильно поливать машинным маслом.
Да. Он глупый американец.
@@ParadigmUnkn0wn wow, that was uncalled for.
@@mr.mcpurrz3143 Нет.
@@ParadigmUnkn0wn No, if he were American, he would have used a 10 cent spring and been done with it.
5:33 of my life I’ll never get back…😑😑😑
That's That's lot more work than a spring hinge..
Guessing he has running water by now….he’s had 2 years to figure that out.
Cool idea. But that was only one wire rope idea.
Chiar bună treaba
I can get the same result much easier and probably not much more expensive... the depot.
Do I have to drill the holes at a slight angle??
No. Ideally you want them as straight as possible
Lol
@@jasonb4738 🤦♂️
He didn't get it. Sometimes humor escapes people. 👍🏼
Is that the only one or have you got 2 more
Just a stupid click bait. But wait. The click bait work. We got a quarter million views.
Pretty sure he ripped the threads out, when he was tapping those holes.
Wow little oil tools would work longer
I like the tap u don't need oil must be new kind
It's like an oil less compressor.🤣.🤣.🤣
I can't believe I'm actually reading the comments on this video 🤦♂️
Dude does not value his fingers 😆 those cotton gloves wouldn't do anything against that disc
great idea and looks fun to produce however... a little over-engineered for that purpose!😅 There looked to be absolutely no force on the clamps at all! I must be missing something
Sucks won't get my 5 minutes back either 😎
I might not have but I've helped rebuild a fence before the guy couldn't see the drill holes he made in the concrete for to put those ankor things in that you can then screw a screw into or nut and bolt either one to bolt down the fence
I liked those ankor things there useful and solid once you hammer them into to holes in the concrete
Anchor
What does this have to do with anything?
@@PhysiqueGeek nothing it was just something I've not seen before
You win the absolutely most random comment of the day award! How does one go from this, to talking about how much he likes anchors? Lol
@@richardbadish6990 lol a fitting reward
You could flip the preload to have it home the door open too.
Es mucho jale no creen!!!
Those knit gloves get snagged by the grinder and it's a LOT worse injury than no gloves at all, at least you can pull away. Next time use leather gloves, not kit gloves!
Worker DIY,
I can understand you wanting to share a clever project like this and post the video, but after reading all the random-ass comments and chatter below...I'm not sure it's worth it.
That’s a lot of screwing around just because the theory works…….a self closing hinge would be more time conscious.
Nice work, but wouldn’t it been better to weld the bottom of it? Well I guess if you didn’t have a welder. That would be the next best thing.
Not sanctioned by the NTSB or the DOT
Personally I hate videos like this that require you to watch it to the end to see if it's even worth your time. Show me 5 seconds of the finished product. Then show me how to do it.
WHAT IS THIS?!? A VICE FOR ANTS?!
Well, that was just stupid.
Сразу вторым номером?
Wastefully iseless in my opinion.
Why are people calling a cable "wire rope" now?
Anything over 3/8 inch is considered wire rope
🙌
Why not just buy a sliding door look Colton Home Depot so much Easter in more way than one. Who is gonna have the time or patience to carry a Alan wrench around with them . Wow some people’s kids
Have you ever thought of just using a spring instead of this complicated bullshit?? Some people just have to make simple things complicated for absolutely no reason.
I stopped watching when I saw the rusty tap
a lot of bother for damn little result.
There goes 5 1/2 mins...
I hope you're not a quaified tradesman. Id make my apprentice go back to school if they produce something as poor as that.
Don’t wish to criticise but if you ground your centre punch back at 60-70 degrees then ground a point on it at 45-50 degrees it would be much easier to see what your doing ,plus use a pilot drill to start your holes instead of drilling straight through with the larger drill bit gives far better results eg much rounder holes ,easier to drill and you don’t get such a severe breakthrough and risk snapping the drill bit ,a variable speed drill would be better much more control otherwise ,ok for use in the outside shitter I guess but needs prettying up if your ever going to get it market
I like the use but bro....get yourself a welder
never grid with a cutting disc, they explode
And never ctu with a gird dcis mother.
But not if you know what you are doing, little bit of pressure at a time Will Make the difference have 40 yrs + doing this type of work patients is the key to keeping safe,to all be safe.
grid, gird, ctu, dsc, great comedy.
Thumbs down... these videos with no overview; that just leave the 'viewers in the dark' till the end are for the birds.
$10.00 at Home Depot??
truly why ?????????????
АХАХАХА. ЕЩЁ РАЗ АААХАХАХА.
..……or you could save a day and just buy the fitting
Novell
mdr ! 1 ressort, 2 rondelles & 2 vis = finito
Cool product, but....
So, is this a training video on everything you should NOT do to be safe, create quality and professional results?
Literally every second of this video shows exactly how not to do it the right way.
its just 1 idea
That's how to get someone hurt. That steel is not engineered for that, so you're just guessing what it can do.
What a waste
You have got to be hitting me. They sell hinges with Springs inside of them for this very purpose and you didn't have to waste anybody's time or money or energy in making this worthless piece of junk click baiting sob. The end of the wire rope is stuck in the end of one of the set screws in the thumb nail and that's not even what you made.