How to Make a Wiffle Ball Strike Zone | Junk Ball | BlitzBall | Backstop
ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2024
- Today I am making a new Wiffle Ball Strike Zone. It is being made out of PVC and Sheet Metal and is the perfect backyard companion to Wiffle Ball, Junk Ball, BlitzBall and more…
--------------------------------------------------------------------------------------
:: CHECK OUT MY WEBSITE :: angelobodetti.com
--------------------------------------------------------------------------------------
---------------------------------------
DIMENSIONS & CUT LIST
----------------------------------------
15” (x3) - Top Cross and Down from Strike Zone
21” - Strike Zone Downs
4” (x4) - Bottom of Strike Zone & Back of Base
7” (x2) - Coming off Back of Strike Zone
9.5” - Back of Base
16” - Base Front Legs
11” - Front of Base
21" x 15" - Sheet Metal for Strike Zone
10x Corner Joints
4x T-Joints
Awesome video!!! In your description if you could change 21” x (2) and 16” x (2) and also add 5 1/4” it would be a little easier to follow. Thanks for the how to!!!! 👍🏻
We padded legs with split pool noodles to settle those corner arguments. Make a very different sound than hitting the bare PVC pipes. Solved the issue for us.
I used an online tool to maximize the material I had and allowed me to get all the pieces cut up with just 3 five foot long PVC. I also used high quality 1" PVC (from Lowes) and felt that was plenty wide and heavy enough to make this all very sturdy.
I would recommend labeling each piece with their measurement and label with a sharpie before cutting. If you put the label at the very end of each piece, it will get covered up when you put it in the joints.
STOCK PIPE #1:
21" - Strike Zone Side
16" - Base Front Leg
15" - Down
4" - Back of Base
4" - Back of Base
STOCK PIPE #2:
16" - Base Front Leg
15" - Down
11" - Front of Base
7" - Off Back
7" - Off Back
4" - Strike Zone Bottom
STOCK PIPE #3:
21" - Strike Zone Side
16" - Strike Zone Top (some comments say 16 is needed, mine needed around 15.5 so I trimmed this one down to fit)
9.5" - base back
5.25" - Strike Zone Bottom
4" - Strike Zone Bottom
(you should have 4.25 inches left as scrap on this stock piece)
Built one this weekend. Thanks so much for the video. The 15" piece across the top was a little short so I changed it to 16" and fits perfect. I used plexiglass for the middle. Thanks again. My son and his friends love it!
same brotha
did 16 work perfectly or should i do 17?
Great video - just built and my family and I are having a blast. One thing, I used your cut list before the build and I think you're missing two cuts. You should add another 21", another 16", and your 5 1/4 cut (I used 5). You need right about 15 ft of PVC for all the cuts. Again, thanks for sharing! Below are how I have it written down for future builds.
21" x 2
16" x 2
15" x 3
11" x 1
9.5" x 1
7" x 2 x 1
5 1/4" x 1
4" x 4
Okay….well, it’s all completed. I followed the instructions pretty closely and except for a few varying measurements, it is a near replica of the one in the video (no paint, however). It was straightforward and without your video it would have nearly impossible to build, so thank you for doing the hard work 🥲. I particularly like the double sheet metal approach as it makes a louder noise and weighs it down even more than a single sheet. Excellent design!!🤩
That’s great! Yea that’s why we did 2, that loud bang makes all the difference
Just made this today. Great video, exact measurements, didn’t have any problems. Thank you🙌🏼
Awesome!!
What size is the sheet metal supposed to be
@@lukesgroi6268 probably like half an inch less than the rectangle
This worked great for me! Thank you for the measurements and your time making this.
You’re welcome!
I built one to these specs and it worked great! Thanks!
Awesome!
My little brother and I followed your instructions and made an identical one. We're gonna use it all summer! Thanks man!
Nice!
how much does it cost
@@masonpirtle929 I don't remember how much I spent but couldn't have been more than like 50 bucks
I made it and it’s beautiful beyond words
Makes playing much more fun!
@@AngeloBodetti For sure!
Love this it helped out a bunch on making it
Thanks for the help!!! Great video.
Thank you!
It wouldn't have to be assembled. Just include some instructions. Cheers!
Thanks for the video. One thing in the dimensions cut. I would List the "strike zone downs" and add (x2), same with the base front legs. Was a little confusing with the other cuts listed as (x2)
Gotcha!
would you recommend painting it before putting it together so you don’t have the worry of missing spots?
I painted after because I figured paint would scrape and chip while I assembled
Thanks for the tips...
My only question is what size PVC pipe
Angelo, What's the size of the sheet metal?
45 at top angled to the back of base.
How much feet in total of pvc pipe also do you do the list twice?
What size sheet medal would you get for this strike zone?
The cutout is about 15x21. Home Depot has a bunch of different rolls sizes
@@AngeloBodetti thanks
I feel like it’s a little small. But does it just look like that in the video
I’m 6’3 and it’s fine for us
For the sheet metal did you cut it or did they have the sheet metal already in that size
Cut it with snips
How much did you pay for all this? Just wondering, I might build one myself!
Was about $45 all said and done
Great stuff...where did you get sheet metal to cut? Thx.
Home Depot
How many t joints and elbows would you need?
Eveyrthing is in the description, but its 4 t and 10 corner
Where do I buy the pvc pipe and sheet metal from
home depot
What thickness in the pvc
1 1/4 inch I believe
Awesome video! I love the new base, I'm looking to build something similar. What are the dimensions of the final strike board?
@@AngeloBodetti I'm not seeing the link /: could you update the description with it please?
@@MasterofSheepdogs the strike board is 21x15. I recommend make everything and then cutting the strike board. This way you know it will fit perfect.
What do we need for the middle on the strike
It’s sheet metal. You can get it at Home Depot. It’s used for roofs.
What are the length of the legs
How much did it cost to buy all the materials?
About 45$
Correct, about $45 total.
It cost me about $35 if you have zip Ties and an old tote lid and don't plan to paint it.
How the heck did you guys get it for soo cheap, I just did it and it about 90
If I used 3/4 PVC Pipe would that work?
Yes
What size is the tin sheet?
21x15 is the dimension of the finished piece
What is the list of the materials we need to make this
They are in the description and the video. Let me know if you have a specific question
How much feet of PVC pipe do you need?
I don’t remember the total but in the description are the measurements so you can do the quick math there
Your probably have it now but I used 13
What inch is the PVC?
Do you have link of what sheet metal you used? Everything I’m finding is super expensive
Got it at Home Depot, it was cheap. Get roof flashing
where do you get the thin sheet of metal
Home Depot and Lowe’s have it
How thick is the pvc thx.
1 1/4
Thx
How many elbow and Tee joints do I need
10 elbow and 4 T joints
What size sheet metal do you need
21x15 is the dimension of the finished piece
@@AngeloBodetti thanks so much bro
Does this take about 13 feet of
Pvc pipe?
Yes.. Lowes sells 10' pieces and 2' pieces so best to just get (2) 10' pieces.. I just priced this out at Lowes and without the sheet metal its $63 (pre tax).. Pretty pricey!
How much did this cost
Before inflation, under &75
Can u tell me roughly the cost it is to make one
$45 he said
Yes about $45
@@AngeloBodetti thx
It cost me about double that. Not sure if it’s from covid or what - just FYI
Home Depot also wouldn’t cut the PVC or sheet metal to size for me
Yea I cut the PVC myself and same with sheet metal. PVC with a saw and metal with snips.
What size was the sheet metal?
21x15 is the zone itself. Just be sure to measure so it’s a good fit
Thanks
What are the dimensions for the sheet metal you used?
21x15. I recommend you build it, then measure and cut to make sure it fits well
@@AngeloBodetti thank you! What type of sheet metal did you use?
@@tferrari01 just thin sheet metal from Home Depot. Roof flashing
@@AngeloBodetti thanks, aluminum?
@@tferrari01 yes
What are the dimensions for the sheet metal?
21x15
What are the dimensions for the sheet metal
Nvm 21x15
How much do you think it would cost?
Before inflation it was under $75
what is the size of the sheet metal in the middle
15x21 but i recommend measuring and cutting instead of cutting first
@@AngeloBodetti Thanks so much!
what size is the pipe used?
He used 1 1/4” PVC
How much would all of this cost?
No joke it costed me 69 dollars
They didn’t have some stuff but it was supposed to be 45
what size pvc is it
1 1/4
What circumference pvc pipe did you use?
I forget, but it doesn’t matter. Grab what’s sturdy and available
@@AngeloBodetti we wound up using 1.5 inches circumference. Worked great!
Hey
Size
Should have said what lengths were being used in the building process. And you could slow the video down. It was hard to follow. And in the end I had to add extra pieces to make all of it fit.
Everything is literally in the description. Took you longer to write this than to click the description and see the lengths
3:28
How much would this cost ?? I want to make one but I don’t want to spend a lot
It was about $50 worth of supplies
Can u make one for me and ship it I’ll pay you ahead of time.
Yeah he could sell quite a few of these. I'm a DIY guy but there's definitely a market right now.
Shipping would be insane unfortunately
how much does this cost
$45 at time of recording
I just priced it out at Lowes.. $63 pretax and that's without the sheet metal .. Add another $15 for that and you're looking at around $84 with tax :O
@@kmccb23 :o
How much you want to make one for me
Where do you live?
@@AngeloBodetti sorry but can’t tell you that
@@cohenmitchell3283 i get it, but you asked if I could make one for you. Obviously your location determines the answer to that question
@@AngeloBodetti I was joking
@@AngeloBodetti I used it to make it
I heard you say your disclaimer and I'm not giving you shit. I don't know they're calling offical height but the two you had didn't seem to match up in height.
Where did you find the metal sheet
Home Depot and Lowe’s have it. It’s roof flashing
Where do u get the metal?
Home Depot. Roof flashing