Omg! The recovery boat! I had the exact idea years ago when I built the same thing out of blue 2” insulation board and a cox .049. I cut it out to look like a big pickle fork and the motor is mounted up high. It goes at a brisk walking pace. I thought I had an original idea, that’s cool to see u have one too!
Great test report. I like your attention to detail, both in the model and the data acquisition. It looks like you need a bigger lake with the speeds you're going! I used to run and race nitro boats in Washington State back in the '70s and '80s. Mine were never as fast as yours, but I was able to set a couple of A-class straight-a-way speed records. The electric boats were just starting to appear with NiCad batteries back then. We clocked one boat at over 100 mph in back-to-back timed runs. Possibly the fastest electric boat of any kind or size at that time. One thing to consider; we always made sure the trailing edge of our super-cavitating, prop blades was squared off with sharp corners to get clean water separation.
Thank you. Very interesting. A piece of history. Yes, the electrics of today are amazing. I do file the trailing edge flat, maybe should do a bit more, make sure the corners are sharp. I will look at them...
Very cool video! Very interesting! I love the "Recovery craft"! I need to make one!! I am on lake Erie, I have flipped my boats in the surf often! Good luck!!
i know im asking the wrong place but does anyone know a way to log back into an Instagram account?? I was dumb forgot the login password. I love any help you can offer me!
@Marshall Vincenzo Thanks so much for your reply. I got to the site through google and Im trying it out now. Takes a while so I will get back to you later with my results.
Some nice runs. Thanks for videoing the recovery. I see what you mean. What cell are you using in the recovery boat. 2 or 3? Still better than swimming. Lol Can't wait to see what you come up with for the new recovery boat. Thanks for the videos.
It's the stock 7.2 volt Ni-MH battery, 1,100 mAh. I actually had the rescue boat run out of battery pushing against the wind once, had to swim anyway. Not far, but still not good...
Hey Sam, how are you running your turn fin? any angle either forwards, backwards, or slanted inwards? I can't seem to get my UL 19 over 65mph without blowing over. I have only just started tuning it though. It has the stock prop and I have an Octura 442 coming to try out.
Sam Hallstrom hi mate I’d like to know what’s the name of that thing you use to bring your boat back and where about did you get it from if you don’t mind me asking you sure
Also, at 70 mph plus, it's running on the razor edge of blowing off every pass. I would say balance first, then sharpen. I've tested before and after polish, very little difference in speed that I could tell anyway...
@@chilly7261 70mph is fast.. very good that you can prime your own props.. I like the octura V940/3 or V942/2 and bigger, theyre for outriggers and ive watched them at 180kph on 4s lipo.. I do like the props you are showing, i watched a vid of the fastest single prop genesis rc boat on youtube and he used a dasboata 1915 if i remember
@@chilly7261 i am not too sure, more trial and error, i think for 6s and a 3674 2200kv motor in a rigger a octura v942/3 would have a massive powerband at a higher rpm..
Triad to laugh your second run you did which how much room you have out there it really looks like. And looked at your second run and said my God that looks like maybe 65 maybe a little more didn't look good so I had to laugh when I saw a 69
"Triad to laugh your second run you did which how much room you have out there it really looks like" Did you just have a stroke? That was complete gibberish.. Seriously, you might need a doctor..
Need to adjust prop strut the boat skipping all over the place. Not really a good test session as boat not properly trimmed. Move batts forward and or adj prop strut.
Oh... Uh, ok. Thanks for the great trim tips. Maybe if I take your advice I break 70mph with a ProBoat UL-19... Wait a minute, I am in the rare 70mph plus air with this boat...
I love every thing your doing keep up the good work
Good info and nice boat man. I have a few myself..
Omg! The recovery boat! I had the exact idea years ago when I built the same thing out of blue 2” insulation board and a cox .049. I cut it out to look like a big pickle fork and the motor is mounted up high. It goes at a brisk walking pace. I thought I had an original idea, that’s cool to see u have one too!
I love the home made recovery boat! UL19 rips
Great test report. I like your attention to detail, both in the model and the data acquisition.
It looks like you need a bigger lake with the speeds you're going!
I used to run and race nitro boats in Washington State back in the '70s and '80s. Mine were never as fast as yours, but I was able to set a couple of A-class straight-a-way speed records. The electric boats were just starting to appear with NiCad batteries back then. We clocked one boat at over 100 mph in back-to-back timed runs. Possibly the fastest electric boat of any kind or size at that time.
One thing to consider; we always made sure the trailing edge of our super-cavitating, prop blades was squared off with sharp corners to get clean water separation.
Thank you. Very interesting. A piece of history. Yes, the electrics of today are amazing. I do file the trailing edge flat, maybe should do a bit more, make sure the corners are sharp. I will look at them...
Very cool video! Very interesting! I love the "Recovery craft"! I need to make one!! I am on lake Erie, I have flipped my boats in the surf often! Good luck!!
i know im asking the wrong place but does anyone know a way to log back into an Instagram account??
I was dumb forgot the login password. I love any help you can offer me!
@Otto Leonel instablaster :)
@Marshall Vincenzo Thanks so much for your reply. I got to the site through google and Im trying it out now.
Takes a while so I will get back to you later with my results.
@Marshall Vincenzo it did the trick and I actually got access to my account again. I'm so happy:D
Thank you so much you really help me out :D
@Otto Leonel You are welcome =)
I used to want this boat until I built my mhz c5000. Still not finished yet but be sure to take a look when I upload a video
Dig your boat! I need to get me one of these soon but I'll stick to my Recoil 26 for now.
Thanks!
Sam Hallstrom i will post a video of me rippin my ZELOS 36 soon
Great vid,,,,, I only run flip recovery myself,,,
Thanks. So you man the rescue boat?
i like how it say waiting for glass and you have that glassy water
These boats are on the edge out of the box on 6s. Lol
Sam
The pro boat prop is a Chinese copy of the abc prop.
Nice. Can you tell me where you got that dual outlet rudder?. Thanks
Want to know Chuandong jiang ye manufacturer lnformation Thank you
Some nice runs. Thanks for videoing the recovery. I see what you mean. What cell are you using in the recovery boat. 2 or 3? Still better than swimming. Lol Can't wait to see what you come up with for the new recovery boat. Thanks for the videos.
It's the stock 7.2 volt Ni-MH battery, 1,100 mAh. I actually had the rescue boat run out of battery pushing against the wind once, had to swim anyway. Not far, but still not good...
Super mais qu'elles sont les batteries des 3s ou 4s ?
What GPS are you using?
Hallo where can we find the plans of that beautiful boat thanks
You have to setup again with Chris prop is simple and full batteries
The batteries are connected in series correct?
What is the best tow boat?
Hey Sam, how are you running your turn fin? any angle either forwards, backwards, or slanted inwards? I can't seem to get my UL 19 over 65mph without blowing over. I have only just started tuning it though. It has the stock prop and I have an Octura 442 coming to try out.
Slanted in at the bottom 3/8"...
Berrilium copper is hard already someone is pulling you're pudd with the heat treat thing
What brand of batteries are you using Mah and C rating? Are you running stock ESC?
They're Revolectrix 5,000mah, 70C lipos...
Hallo do have sole experience with cover the boat with oracover
I want to test this thank you
Run missing from the farandole leg down towards you and do it five times in a row and then check the speed
Looks like the ABC 1716 is the way to go. Me being a extreme novice to boats, is it worth paying to have the prop prepped by them ? As always thanks
Yes. Buy a Dasboata prop. Props are a big part of going fast
@@chilly7261 so it will be money well spent, it's a plan man.
@@RoostedFilms Yeah, prepping props is another whole study. Buy one, and right off you know that's not holding you back...
@@chilly7261 holy hell they are over $100! Things are getting serious 😂
@@chilly7261 that ABC 1716 isn't the easiest prop to find in general is it ?
Excuse my ignorance, but those props look metal, are they metal or plastic that looks like metal?
Metal props, yes
You have a dedicated video of your rescue boat?
Yes. I'll admit tho, it's not the greatest rescue boat. Here's the link... th-cam.com/video/uHAhgoz2sjs/w-d-xo.html
Sam Hallstrom hi mate I’d like to know what’s the name of that thing you use to bring your boat back and where about did you get it from if you don’t mind me asking you sure
@@vakkaphire8565 There's a link to a video of my rescue boat in the comment above this one :)
Sam just recently saw your reply. Thanks! It gets the job done so its good. Haha
what happened?. did the prop have too much... Can you get away with a sharpen or is it imperative to balance as well
Balance is most important...
Also, at 70 mph plus, it's running on the razor edge of blowing off every pass. I would say balance first, then sharpen. I've tested before and after polish, very little difference in speed that I could tell anyway...
@@chilly7261 70mph is fast.. very good that you can prime your own props.. I like the octura V940/3 or V942/2 and bigger, theyre for outriggers and ive watched them at 180kph on 4s lipo.. I do like the props you are showing, i watched a vid of the fastest single prop genesis rc boat on youtube and he used a dasboata 1915 if i remember
I'd like to know more about 3 blade props. How do you cross reference size versus a two blade?
@@chilly7261 i am not too sure, more trial and error, i think for 6s and a 3674 2200kv motor in a rigger a octura v942/3 would have a massive powerband at a higher rpm..
Triad to laugh your second run you did which how much room you have out there it really looks like. And looked at your second run and said my God that looks like maybe 65 maybe a little more didn't look good so I had to laugh when I saw a 69
"Triad to laugh your second run you did which how much room you have out there it really looks like"
Did you just have a stroke? That was complete gibberish..
Seriously, you might need a doctor..
Need to adjust prop strut the boat skipping all over the place. Not really a good test session as boat not properly trimmed. Move batts forward and or adj prop strut.
Oh... Uh, ok. Thanks for the great trim tips. Maybe if I take your advice I break 70mph with a ProBoat UL-19... Wait a minute, I am in the rare 70mph plus air with this boat...