Sig p320 magazines fit for em sar don’t make extendos for em directly but they pretty much took a glock sig and XD and put it into one gun aka the sar so sig p320 mags fit I’m sure some other brands too just gotta look and try
So I have 2 questions about these slides, 1 does it have serial numbers on the slide? I can't buy one with different serial numbers and 2 how clean is the machining on the outside? My factory slide looks wavy when you look down all the flats and corners
Pretty cool. I’ve been waiting for over a month for this slide to go back in stock. Still no idea on when it’ll be back in stock. I’m tempted to just buy the socom at this point.
Hey bruv cab you link me to that 32 rd mag?...does it require customizing to fit the SAR9 like the sig p320 mag needed the new magazine catch slot grinded into it so it would work in the SAR9
Yes, needs to be modified, here’s the link, th-cam.com/video/GM-st5PmKW8/w-d-xo.html Promag 32rd, gunmagwarehouse.com/promag-sig-sauer-p320-p250-9mm-32-round-magazine.html
No just the lower receiver main core that holds the trigger mechanism. Not the slide, matter fact, you can buy a complete slide with barrel and all the components of the lower from ebay straight to your house.
Nice. It’s impossible for me to find a holster for my Sar 9 with baldr pro r olight and holosun 507k x2 red dot. I’m thinking maybe a Glock holster with a similar light? Any suggestions? Also what sights did you get from Glock for the Sar? Thanks.
For the holster I do make my own kydex. But I’m going to show you a trick. Get a glock 17 holster with the light you like, get some type of foam like those use for exercise mats, not the very soft not very hard. Cut four square pieces big enough to cover the gun in the holster on both sides, two peaces on each side to get enough padding. Heat the holster with a heat gun or a hair dryer not to close or you will burn the kydex, only on the gun portion of the holster not the light portion, the kydex will start getting soft at the same time introduce the gun in the holster till fit all in and into the light accommodated in the light pocket of the holster. Now set two pieces of foam in the top of the other in the floor heat the side of the holster with the gun inside and place it in the mat put when still hot and soft , quick, the other two peaces in the top like a sandwich 🥪 and a hard flat surface like a peace on plywood and seat in the top with your weight for like 5 min. Do the same to the other side again. Pretty much you are molding the holster to your gun. And then you can keep doing it with parts that need to adjust apply heat and mold again. Sounds like a lot but is pretty easy.
@tellitlikeitis4789 of you have the same set up i have the Romeo zero with the metal shield cover then this one will work perfect with the integrated rear sight in the optic, now you will purchase the set to only use the front sight to cowitness with the optic, AmeriGlo GL682 Tall Supp Height Sight 5XL Night sight front fits Glock Gen1-5
This is the cheapest i have found, www.ebay.com/itm/184885062731?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=iRxDK_oeRZq&sssrc=4429486&ssuid=xTEcznBhRre&var=&widget_ver=artemis&media=COPY
thank you! your video helped me install my romeo zero onto my Sar9X
I would be interested in a holster if you make and sell them.
Good video,think I'm sold on these now. Real sweet looking piece.
And thanx for all the amazing vids.
What is the 32 round mag for? Sar specifically or another model that fits it?
th-cam.com/video/GM-st5PmKW8/w-d-xo.html
Sig p320 magazines fit for em sar don’t make extendos for em directly but they pretty much took a glock sig and XD and put it into one gun aka the sar so sig p320 mags fit I’m sure some other brands too just gotta look and try
Sar USA also has SAR9 threaded barrels now also bruv.
$99👍🏼 its coming
@@gunsrus777 Did you get it? Would like to see that on video too.
Did you have to modify the P320 clip to catch in the SAR9
th-cam.com/video/ZXakFGGXAPc/w-d-xo.html
Still runs with no failures? Also where can I get the sight you have mounted? Thx.
www.ebay.com/itm/384831312505?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=WSs6Lb7GRGi&sssrc=2349624&ssuid=xTEcznBhRre&var=&widget_ver=artemis&media=COPY
So I have 2 questions about these slides, 1 does it have serial numbers on the slide? I can't buy one with different serial numbers and 2 how clean is the machining on the outside? My factory slide looks wavy when you look down all the flats and corners
Mine looks pretty good. No serial number in the slide like the glock.
So the SAR 9 X slide fits perfect without purchasing extra materials?
Yes, just put your barrel, recoil spring and lower.
Pretty cool. I’ve been waiting for over a month for this slide to go back in stock. Still no idea on when it’ll be back in stock. I’m tempted to just buy the socom at this point.
They have been out of stock for several months. I can’t find em anywhere.
Where did you get your sleeve
Would happen to know if there are any kits that the sar9 would fit or any you recommend.
Can you tell me where you got the extended pro mag 32 round grip?
I made it with Kydex.
@@gunsrus777 do you have a tutorial?
@@lacam7 facts we need the tutorial pls @gunsrus777
Hey bruv cab you link me to that 32 rd mag?...does it require customizing to fit the SAR9 like the sig p320 mag needed the new magazine catch slot grinded into it so it would work in the SAR9
Yes, needs to be modified, here’s the link,
th-cam.com/video/GM-st5PmKW8/w-d-xo.html
Promag 32rd,
gunmagwarehouse.com/promag-sig-sauer-p320-p250-9mm-32-round-magazine.html
TY
Do you sell those holsters ?
Where can I find the sleeve for the 32 round mag
Does the slide have to be sent to an FFL ?
No just the lower receiver main core that holds the trigger mechanism. Not the slide, matter fact, you can buy a complete slide with barrel and all the components of the lower from ebay straight to your house.
Nice. It’s impossible for me to find a holster for my Sar 9 with baldr pro r olight and holosun 507k x2 red dot. I’m thinking maybe a Glock holster with a similar light? Any suggestions? Also what sights did you get from Glock for the Sar? Thanks.
For the holster I do make my own kydex. But I’m going to show you a trick. Get a glock 17 holster with the light you like, get some type of foam like those use for exercise mats, not the very soft not very hard. Cut four square pieces big enough to cover the gun in the holster on both sides, two peaces on each side to get enough padding. Heat the holster with a heat gun or a hair dryer not to close or you will burn the kydex, only on the gun portion of the holster not the light portion, the kydex will start getting soft at the same time introduce the gun in the holster till fit all in and into the light accommodated in the light pocket of the holster. Now set two pieces of foam in the top of the other in the floor heat the side of the holster with the gun inside and place it in the mat put when still hot and soft , quick, the other two peaces in the top like a sandwich 🥪 and a hard flat surface like a peace on plywood and seat in the top with your weight for like 5 min. Do the same to the other side again. Pretty much you are molding the holster to your gun. And then you can keep doing it with parts that need to adjust apply heat and mold again. Sounds like a lot but is pretty easy.
You can use a dremel to adjust the lining and sand paper to refinish the edges
@@gunsrus777 appreciate you big bro. What about the sights to co-witness?
@tellitlikeitis4789 of you have the same set up i have the Romeo zero with the metal shield cover then this one will work perfect with the integrated rear sight in the optic, now you will purchase the set to only use the front sight to cowitness with the optic,
AmeriGlo GL682 Tall Supp Height Sight 5XL Night sight front fits Glock Gen1-5
This is the cheapest i have found,
www.ebay.com/itm/184885062731?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=iRxDK_oeRZq&sssrc=4429486&ssuid=xTEcznBhRre&var=&widget_ver=artemis&media=COPY
I've been looking and can't find mag sleeves that fits 32rd for the Sar9. If you could help it'll be appreciated my guy
I made that sleeve out of Kydex material.
@@gunsrus777 thanks bro looks good on it
how a do this sleeve for 32 r magazine, looks sick
Where can I get that red entension from
From Galloway I think fam ban
Could i buy the 32mag from u? With the mod & sleeve....
Nice job.
It can take a extendo never
What?
@@gunsrus777 sar is 30 round capable?
💪🏾👍🏾
Lol me too!
@@jameslevolo8791 yes sirrr
😍😍😍💪👍