MJX Hyper GO 10208 v1.0 First Run - Top Speed , Skate Park Bash, Review & Mod - Best RC Car of 2024?

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 พ.ย. 2024

ความคิดเห็น • 107

  • @lsismeiro
    @lsismeiro 5 หลายเดือนก่อน +4

    Great video, thank you for your bashing update. The fix for the body is really good.

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน

      Thank you for watching!

  • @Tattoosandtoys
    @Tattoosandtoys 5 หลายเดือนก่อน +3

    Thing looks awesome. I have been waiting for a 1/10sbasher cale from them for a while. I love it’s finally almost all hex hardware. The hypergo line is gonna give everyone a major run for the money. Absolutely top notch for the price point.

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +1

      They certainly offer a ton of fun for the money! Thanks for watching!

  • @davetracey7444
    @davetracey7444 5 หลายเดือนก่อน +4

    Orsome video,
    The body coming off all the time is a let down.
    I like your quick fix though.
    With no other main issues looks like a great truck.
    Just got to wait till July for when MLH has stock.

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน

      Thanks for watching!

  • @Tattoosandtoys
    @Tattoosandtoys 5 หลายเดือนก่อน +1

    Man truck seems tuff as rusty nails. I’d put a piece of foam in where the body clips to chasis. Not sure how it works but that’s what I did on my granite grom when my body kept popping off and it really kept it inline for me. I have been waiting on this truck to come out for like 3months since I seen the leaked pics of it. Can’t wait to get mine. By the way that skatepark is set up pretty nice for rc-ing. Thanks for the vid.

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน

      Great idea on the foam! Thanks for watching!

  • @magnusstone
    @magnusstone 5 หลายเดือนก่อน +2

    Great video, super informative. The main issues look like an easy fix. Not the truck for me, but looks nice!

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน

      Thanks for watching!

  • @angkorpeck
    @angkorpeck 5 หลายเดือนก่อน +7

    Ill tell you whats nicer than that truck, the skatepark you took it to. There was no graffiti no rubbish no pools of dirty water barely any leaves. That right there is unbelievable.😅

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +2

      A great little hideaway! Thanks for watching!

    • @kevingalea92
      @kevingalea92 5 หลายเดือนก่อน

      Who's cares about that man wow

    • @andrew4403
      @andrew4403 5 หลายเดือนก่อน +1

      I do.... NOT. LOL 😆 😂 😂😂😂​@@kevingalea92

    • @VoltUpRC
      @VoltUpRC  4 หลายเดือนก่อน

      I like my little spot!

  • @roadstar499
    @roadstar499 4 หลายเดือนก่อน +1

    Whats your top speed on a good 4s lipo? Over 50 mph? Could not find your gps speed test on this video..thanks

    • @VoltUpRC
      @VoltUpRC  4 หลายเดือนก่อน

      Check out 2:43!

    • @VoltUpRC
      @VoltUpRC  4 หลายเดือนก่อน

      A 4s hv battery or larger pinion would put this over 50 no problem

  • @angkorpeck
    @angkorpeck 5 หลายเดือนก่อน +3

    Whats the c rating on the battery pack you're using? 3s or 4s? Sorry if you already mentioned it the video.

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +4

      Thanks for watching! It's an Ovonic 50c 5200mah 4s battery. Really a fantastic battery.

    • @MasterShake300
      @MasterShake300 5 หลายเดือนก่อน +1

      @@VoltUpRC Holy crap, no wonder it's zipping around. Any over heating issues?

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +2

      @MasterShake300 nope, none at all, one of the many awesome features to this thing, is designed for 4s with a large low kv motor and 4s 100a esc

  • @tedjacobson7822
    @tedjacobson7822 5 หลายเดือนก่อน +1

    Thanks for the videos on this new truck Subscriber 151 here! Liked the video as well to help out. Know you are new, work on keeping the truck in the frame for know that can be tough to do but with time and more videos I'm sure you'll get better at that.

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +1

      Thanks for the feedback and support! This is my first time with a camera strapped to my head, gotta learn to move my whole head and not just my eyes lol! Having a blast though! Keep on RC'ing!

    • @tedjacobson7822
      @tedjacobson7822 5 หลายเดือนก่อน +1

      @@VoltUpRC yeah, can tell it’s tough to do camera work and drive at the same time. One TH-camr has his go pro setup on their head so they can sorta look up and see what is in that frame.l to help with this. I wish I could recall who to was that said that but watch a lot of different videos so don’t recall lol

    • @VoltUpRC
      @VoltUpRC  4 หลายเดือนก่อน

      Thanks!

  • @aliasangelalias
    @aliasangelalias 5 หลายเดือนก่อน +3

    cool vid man! I got the Omni Terminator... after that one breaks... maybe I get this one, lol

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +4

      I love my omni Terminator, but I've been plauged with diff cup problems. I also wouldn't take it to a skate park, it's too high class of a vehicle. I love both for different reasons. Thanks for watching!

    • @aliasangelalias
      @aliasangelalias 5 หลายเดือนก่อน +3

      @@VoltUpRC Now is just my opinion, the King of RC with power, fun, speed, and durability... I give it to ARRMA Kraton 6S. And don't bother with the 8S.

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +2

      @aliasangelalias I agree, k6s is my favorite of all time, BUT kind of apples to oranges compared to this

  • @drewjayy8495
    @drewjayy8495 5 หลายเดือนก่อน +1

    Awesome videos, thank you for making these. Do you think decent tyres with a negative offset could solve the rubbing? What would it take to fit a bigger pinion to the motor?

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +1

      Thank you for watching! A little better offset would absolutely fix the rub or even just stiffer foams. I've got a video coming out addressing just that!

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +1

      After bash video
      th-cam.com/video/ukBGa04itYU/w-d-xo.html

    • @VoltUpRC
      @VoltUpRC  4 หลายเดือนก่อน

      Just found out the motor mount is adjustable! 12t-15t and it comes with a 12t. Photo posted in the 10208 Facebook Group

    • @drewjayy8495
      @drewjayy8495 4 หลายเดือนก่อน +1

      ​@@VoltUpRCWow dude, this thing keeps sounding better and better! Thanks so much for the update, you're doing such a great service for the RC community with this coverage ✌️

    • @VoltUpRC
      @VoltUpRC  4 หลายเดือนก่อน

      Really having a blast with it!

  • @roadstar499
    @roadstar499 4 หลายเดือนก่อน +1

    Whats top speed on a good 3s? 37 mph? Thanks

    • @VoltUpRC
      @VoltUpRC  4 หลายเดือนก่อน

      It's geared so low I wouldn't even bother putting a 3s battery in it. If you want to run 3s, you'd probably want a 3300-3500kv motor in there

  • @PieterStefan
    @PieterStefan 5 หลายเดือนก่อน +1

    Which proline tyres do you recommend for the 10209?

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +2

      Any 2.8" mt tire should fit just fine, should have stiffer foam to help with the scrape, and will be slightly wider offset. The ones below would be my first choice.
      www.amazon.com/Pro-line-Racing-Badlands-Black-PRO1012510/dp/B07N8M8Z81/ref=asc_df_B07N8M8Z81/?tag=hyprod-20&linkCode=df0&hvadid=693711599455&hvpos=&hvnetw=g&hvrand=15303158745831495981&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9007668&hvtargid=pla-749657171430&psc=1&mcid=e0ab2660a248378599ecac583f6da403&gad_source=1

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +1

      Check out the after bash video with a tire upgrade!
      After bash
      th-cam.com/video/ukBGa04itYU/w-d-xo.html

  • @bismuth7730
    @bismuth7730 5 หลายเดือนก่อน +2

    Ty for videos on this truck, its really helpful!

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน

      Thank you for watching!

  • @Boogie_the_cat
    @Boogie_the_cat 3 หลายเดือนก่อน +1

    It looks fine, depending on the price. Content creators all say the price will be $250-$280 but a lot of yahoos in the comments section talk about finding it for $155, which would be an excellent deal, as their H14BM is $175.
    That price scheme doesn't make sense to me, and suspiciously the commenters say they *can't* post the link.
    I don't care about it enough to search prices myself, but I imagine the $155 is a scam, a different truck completely, classic AliExpress style.
    The truck isn't even released, why they gonna cut the price by 40% and have it cost less than their old model ?
    Makes no sense.
    I'm not in the market for a truck, so I'm not out looking at prices, but the price they ask for this is key to whether it's a good deal or not.
    It's kinda slow on 3s, and seems to be a b* to wrench on.

    • @VoltUpRC
      @VoltUpRC  3 หลายเดือนก่อน

      No joke, I actually just recieved my v1.1 10208 from aliexpress for $146usd shipped yesterday! This truck is crazy and the release of it has been absolutely nuts! I paid $290 for the truck you see in the video

  • @nowayjose20
    @nowayjose20 5 หลายเดือนก่อน +1

    How did you get ahold of one these already??

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน

      Just lucky I guess....?

    • @nowayjose20
      @nowayjose20 5 หลายเดือนก่อน +1

      @@VoltUpRC huh? I’m trying to buy one bro lol

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +1

      You can place an order on hypergorccar.com, they're shipping v2 models out before July

  • @angkorpeck
    @angkorpeck 5 หลายเดือนก่อน +1

    I just ordered mine from Makerfire. White body $258 before tax, free shipping. It says that it's in stock but we'll see when it ships.

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +1

      Congratulations! You'll love it! Makerfire says they're expecting them to arrive for shipping in July. Thanks for watching!

  • @Replayable_RC
    @Replayable_RC หลายเดือนก่อน +1

    Do you recommend buying this car?

    • @VoltUpRC
      @VoltUpRC  หลายเดือนก่อน

      @@Replayable_RC that would be a HUGE yes!

    • @VoltUpRC
      @VoltUpRC  หลายเดือนก่อน

      @@Replayable_RC check out the 10208 Facebook Group! These trucks are under $200!

  • @angkorpeck
    @angkorpeck 5 หลายเดือนก่อน +1

    Nice location 🤙The body popping off would drive me nuts, I would try and make a screw or twist lock mechanism. Let us know how your rubber band body lock holds up on your next vid.

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +1

      Gosh it was annoying.... Did you see what I came up with? Would love to see what you figure out as well!

    • @boduke9428
      @boduke9428 5 หลายเดือนก่อน +2

      They never work. My Xmaxx has a self removing body and I despise chasing it around to put the body back on after every crash or hard landing. They're great for a crawler or trail truck but stupid on bashers. People shouldn't be too lazy for Few body clips, you're just not that important. I spend tons less time putting in 4 body clips that keep the body on until I take it off than I do putting the Xmaxx body back on dozens of times.

    • @angkorpeck
      @angkorpeck 5 หลายเดือนก่อน +2

      @boduke9428 your right about that, they should keep the clipless body's only for the streets and crawlers.

    • @VoltUpRC
      @VoltUpRC  4 หลายเดือนก่อน +1

      My simple body fix seems to have done the trick! It's pretty great now!

  • @AJGdrums
    @AJGdrums 5 หลายเดือนก่อน +1

    Great vid. Just need to tilt your camera up a bit more. It kept disappearing out of shot at the skatepark

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน

      Lol, I have no idea what I'm doing. I've just got a phone hot glued to my forehead, this is all new to me. Thanks for watching!

  • @chaoticadventure
    @chaoticadventure 5 หลายเดือนก่อน +2

    Does this have a center diff??

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน

      It sure does! One of it's best features!

  • @happydayrc
    @happydayrc 5 หลายเดือนก่อน +1

    cool idea mille grazie dall italia Roma

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +1

      Thanks for watching!

  • @wizard6916
    @wizard6916 5 หลายเดือนก่อน +1

    Subscribed!

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน

      Thanks for watching! Be sure to check out my other videos on this truck!

  • @dnbpianist
    @dnbpianist 5 หลายเดือนก่อน +2

    Awesome

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน

      Thanks for watching!

  • @SteveVonderbrelie
    @SteveVonderbrelie 5 หลายเดือนก่อน +1

    Gutes Auto aber mit der Kamera Führung musst dir was einfallen lassen 😊🎉❤

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน

      Lol I just have a cell phone glued to my head I know it's awful

  • @andrew4403
    @andrew4403 5 หลายเดือนก่อน +1

    For the body mount clip all you could have done was drilled two small pinholes and then attached a spring It looks like it would have been very easy to do

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน

      That's kind of like what I did, but it can't have a pull spring anywhere, as there's a ton of obstructions under the body around the shock tower. A spring would likely interfere with getting the body on. The only way to add a pull spring would be on the exterior, which I was trying to avoid.

  • @philpowell1162
    @philpowell1162 5 หลายเดือนก่อน +2

    So over MJX. Get a real RC Car ! Team Corally asuga.
    Yeah it cost more.
    Once you buy a high quality RC . I don't know how you would go back. If I had kids
    I would buy them a MJX.
    Thanks for the video 😊

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +1

      I've got a building full of tekno, arrma, traxxas, xray, associated, losi, redcat, hbx, hyper go, and more. I love them all. I get a lot of enjoyment out of some of these smaller brands just like the larger ones. Thanks for watching!

    • @cypherzz-_-5804
      @cypherzz-_-5804 5 หลายเดือนก่อน +1

      should I cancel my order of mjx 10208? Are their parts really cheap? I was thinking about going team corally Kagama.

    • @VoltUpRC
      @VoltUpRC  4 หลายเดือนก่อน +1

      Idk these things are really fun, but the Kagama is on another level, and in another price range. Apples to oranges

    • @philpowell1162
      @philpowell1162 4 หลายเดือนก่อน +2

      @cypherzz-_-5804 There is nothing wrong with starting of with MJX.
      That's where I started. Over time you will know what RC you like.
      I prefer a RC that is fast and more controllable. I prefer buggies over truggys! And the Kagama is not for people starting out in RC. My friend has one and there not easy to control. The Asuga is just as fast and has good control. And yes it's Apples and oranges. Enjoy, hav fun with it. It put a smile on your face. Make you feel young again.

    • @VoltUpRC
      @VoltUpRC  4 หลายเดือนก่อน

      I enjoy tinkering with them all!

  • @Nerm78
    @Nerm78 5 หลายเดือนก่อน +1

    Disregard my comment on tye size comparison video. I didnt realize that was a older video and you had others with the speed test and what not. That thing seems like a little beast and 47mph is pretty damn good. How does the truck compare to the Omni? I know its bigger but other than that what are some of the major differences?

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +2

      The omni terminator is all around a "better" truck, it has a lot more suspension travel, is much silkier in feel, and has adjustable motor mount, plus a ton of rlaarlo factory upgrades available. However, the omni terminator is microscopic in comparison, has a nearly unusable stock esc due to excessive braking that can't be programmed out, and they suffer from terrible diff cup wear that currently has no true solution. The mjx is a "cruder", larger, and I'd trust much more durable bash machine where the omni terminator is a more refined precision piece. Personally, I feel their apples to oranges, my Terminator is too nice to sling off a half pipe into the woods, and I keep it on the shelf because I don't want to tear up more diff cups. The mjx LOVES being heavy and tough and thrown around.

    • @Nerm78
      @Nerm78 5 หลายเดือนก่อน +1

      @VoltUpRC I have a cf terminator with all the (imo) necessary and usefull upgrades so I see what you are saying. I love the terminator but I would cry if I took it to a skate park and beat the shit out of it like I do my maxx. After watching the mjx seems like small maxx more than a large omni lol either way I want one!

    • @VoltUpRC
      @VoltUpRC  4 หลายเดือนก่อน

      Thanks for watching!

  • @laranja3
    @laranja3 5 หลายเดือนก่อน +1

    YOOO

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน

      Thanks for watching!

  • @FarmerFpv
    @FarmerFpv 5 หลายเดือนก่อน +1

    Lots of body rubbing. Lots of vibration. The suspension is way too soft and fast rebounding for jumping. Needs thicker WT shock oil and stiffer springs. It's just slapping the chassis the whole time even on the small jumps. That is bad for other electronics and the diff cases. I'll stick with my Team Associated Rival MT10 for now. I always say that and end up buying it anyway because I love modding RCs, lol.

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน

      Great eye! I'm hoping all of those concerns are addressed in the v2! Mt10 is a mean machine for sure. I love em all!

  • @andrew4403
    @andrew4403 5 หลายเดือนก่อน +1

    I can't believe MJX was dumb enough to not put a spring on that clipless body

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน

      I was surprised as well. Couple more days and the v2 should ship out!

  • @DavyTracy-l7i
    @DavyTracy-l7i หลายเดือนก่อน

    Williams Jennifer Hall Anthony Gonzalez Amy

  • @boduke9428
    @boduke9428 5 หลายเดือนก่อน +1

    That was a pretty mild bash to break a servo. They must be trying to copy Traxxas with the self removing body and crap servo. I definitely hate clipless body's. My Xmaxx is the same way. It's definitely quicker and easier to put 4 body pins in once. I want to see this next to a Omni Terminator and a real 10th scale truck. I'll still get one eventually but I'm not very excited yet.

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +1

      th-cam.com/video/iUV73ptf6uE/w-d-xo.html
      Here it is next to a real 1/10 scale and the omni Terminator. Since the rlaarlo can't keep diff cups to hold their shape, mine is unfortunately on the shelf. I kind of think your comment and request are too good to be true since I have a video of exactly what you asked for. Like and subscribe for more content!

  • @rc_chan8572
    @rc_chan8572 5 หลายเดือนก่อน +2

    definitely better than the MT10 ( price/durabilty/parts) ...in my opinion

    • @VoltUpRC
      @VoltUpRC  5 หลายเดือนก่อน +1

      I'm not disappointed whatsoever in this thing that's for sure! Thanks for watching!

    • @boduke9428
      @boduke9428 5 หลายเดือนก่อน +3

      You're definitely not right. It's $30 less. If that's a big deal then you're in the wrong hobby. I bet my next 10 paychecks I can get MT 10 parts in 5 years. You willing to bet that on this truck? It's gonna take more than 1 run video before anyone can say this is better than anything. With this self removing body it's not looking good so far.

    • @andreasw.3137
      @andreasw.3137 5 หลายเดือนก่อน +4

      @@boduke9428
      If it's as well received as the smaller ones, then there will still be spare parts available in a few years, in my opinion 😉 Even if it's not better, it currently costs about €70 less as a pre-order (in Germany), and the motor, ESC, like one a few other parts seem to be more valuable. Furthermore, based on the mistakes of the previous series, they probably want to bring an update onto the market soon, it doesn't sound that bad to me at first 🙂

    • @benpeterson448
      @benpeterson448 5 หลายเดือนก่อน +3

      😂 we don’t know that yet.

    • @SherryVarner-kq7uk
      @SherryVarner-kq7uk 5 หลายเดือนก่อน +5

      Nice run 😎.. But I'll stick with my omni terminator carbon fiber edition. It looks like it handle better and faster, with out a 4s battery I got 50mph on mine .. nice truck tho 👌

  • @not_the_creator_of_blender
    @not_the_creator_of_blender 5 หลายเดือนก่อน +1

    try 4s