Headache Rack Modifications For My Powerstroke
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- This video was supposed to be out several months ago, but unfortunately things got put on hold for a while. I made a few mistakes on this headache rack, but overall, I'm pleased with how it tuned out. I misspoke when I said I put two end caps on the center posts when in reality I only put a cap on one side. I wasn't a half inch off LOL!! Even though the rack was below the roof of the cab I'm still able to rest things on top without worry of denting the truck. At the end of the day this headache rack project ended up costing me roughly $40. That's what I call a good deal!
If you would like to see more great content check out these channels below!
Check out Zane’s channel HODGE_PODGE_DODGE_GARAGE here:
/ @hodgepodgedodgegarage
Check out James’s channel 3rd Coast OBS here:
/ @3rdcoastobs467
Check out Jason’s channel Sparks Fire and Baling Wire here:
/ @sparksfireandbalingwi...
Check out Wesley Johnson’s channel here:
/ @wesleyjohnsonmi
Listen ad-free with TH-cam Premium
Song
Feel Good
Artist
Syn Cole
Album
Feel Good
Licensed to TH-cam by
AEI (on behalf of NCS); LatinAutor - SonyATV, Featherstone Music (publishing), CMRRA, Abramus Digital, UNIAO BRASILEIRA DE EDITORAS DE MUSICA - UBEM, Sony ATV Publishing, Warner Chappell, LatinAutor - UMPG, UMPI, LatinAutor, ASCAP, and 22 Music Rights Societies
Wow that turned out great. Even with a cheap welder you can achieve a good build. Makes me want to build one.
It truly was a fun project, and I’d didn’t take much to make it suit my needs. Plus it has paid for itself because of how useful it is.
Beautiful fit and finish. You’re on your way to being an expert welder.
Thank you! I’m really pleased with how it turned out, and it should add a lot of utility to the truck in the future
I dont really have a need for one, but after watching this, I kinda want one. Great video and man, you did amazing work on that toolbox. Awesome stuff
Thank you! I’m really happy with the headache rack. The hooks I welded on the dog ears have been a huge help. Especially the tool box I use it all the time and has paid for itself👍. Thanks for watching😀
*Fantastic* job Cody!! 😀 I really like the alterations you made. Great job planning the build. I like how you made sure there was room for the lid 🙂👍 That rack will help you more than you would think. Take care 🔩🔧
I appreciate that Zane! There was a whole lot of panning off camera. I must’ve put that headache rack on and off the truck a dozen times🤣! As you saw in the video there’s about a finger width of space between the box and headache rack. That way if I accidentally over extend the tool box lid it wouldn’t damage anything. Take care👍
Rack turned out great Cody. Good pre-planning for clearance on the tool box lid. I probably would have forgot that!
Thanks Jason! It took a whole lot of planning off camera, but I’m really pleased I took the time to get it right. I know the 3rd brake light is covered up a little bit, but I don’t think it will be an issue. Take care!
Cody, really enjoyed the video and taking us along with the welding, great job! And the stickers look great!
Thanks Tom I’m glad you liked the video! it’s always fun to break out the welder, and I’m really pleased with the modifications. Plus I’d like to thank you again for the stickers👍. Have a good one!
Great job Cody! Love when I see that there is a new video to watch! Seems like that welder is doing a good job for you
Thanks Adam! I’ve really been impressed with that welder. I have no idea how well it penetrated the 1/4in steel but it’s held up great so far.👍
You want a gap between the materials being weld, or a nice bevel, better penetration and bond, plus your clean up grind will be easier. Next time you're out and about, pick up a can of anti-splatter spray. Nice work on the rack.
That’s really good advice! I’ll have to track down a can of that stuff cause I spent a good amount of time to get rid of weld splatter and still didn’t get it all when it came time to paint.
Great project. I like what you did. You could extend the top rail by adding steel tube to the top. Then you would have to cut a gap for your third brake light. So yeah. Forget that comment. Lol.
Thanks for new content.
Thanks Mr. Randall! Even though half of the third brake light is covered up I’m hoping it won’t be a problem in the long run. I’m glad you liked the video, hope you had a great Christmas and New Years!👍
It's a cheap flux core welder. Nothing is going to look pretty with it. Just remember 'a grinder & paint, makes me the welder I ain't' . Don't worry about it, it all comes with time. It did turn out pretty nice though! I'm looking forward to seeing what you got for a diagnostic tool.
Hahaha “a grinder and paint makes me the welder I ain’t” would make a good t-shirt🤣! You’re absolutely right Wesley, things will get better with time and experience, but for a $100 welder it continues to impress me every time I use it.
Awesome looking rack but next time prep the steel better before u paint and maybe use a self etching primer before the paint
Thank you! It’s a good rack for what I have invested in it. It’s already paid for itself in the times I’ve had to haul long pieces of gear that kept the cab from getting scratched up. I agree, I think the metal could’ve come out a little cleaner.
Beautiful!! That's what l want for my 69 f-100.
Quedo mas bonita amigo éxitos
It looks great man good score!
Thanks man! I’m really happy with how it turned out. I bought a 10ft long ladder/lumber rack the other day to use for a project, and I wouldn’t have been able to bring it home if it wasn’t for the headache rack, so it’s already paid for itself🤣!
Looks great. Thanks for sharing. Where did you get the organizer tray for toolbox?
Thank you, I’m glad you like it! I actually came across that organizer tray at my local salvage yard.
Hey mate rack looks good welds are getting better any update on the crash did u get that fixed. And hope u had a good Christmas and new years. Good luck for 2022.
Thanks Metal Art! I’ll have an update soon about the truck fender, but I’ll let you know that it has a happy ending👍. Hope you have a great 2022 as well!
I’m sorry if I missed it but about how much did it cost to build?
I actually got this headache rack at the junk yard for I think only $25 bucks. The rest of the materials (spray paint, scrap metal, and d-rings) cost about another $25 dollars. So I’d say roughly $50 all together.