Old bikes , always fun of surprises. Never underestimate their ability to confound and exasperate you . But always worth it in the end . New valve guides and a seat cut . Not a huge deal for a guy with your ability . Piston looked very oily , might wanna check breather , I'm not familiar with Norton singles , so I might be talking out my arse . Sometimes I use two gaskets on rocker covers , each one Wellsealed to metal surface and copper coat between them . Better than grease which melts and runs away , I find . But I love copper coat , especially on toast .
Copper is proper. A popular fraise with local plumbers. I could just let it leak and buy shares in an oil company. And you are right, the piston is a bit oily. I prefer to dip chips (fries) in my copper slip as I'm not a big toast eater.
Great video your enjoying the bike even though it has teething issues that can be sorted .. Should have shouted for a spring compressor got a few here grab one when your about .. 👍👍
These are very relaxed and enjoyable videos to watch . . I'm currently working on my 1952 350 AJS so can relate to all of the issues you are encountering and rectifying . . . 👍👍👍
Due to the scarcity of quality old 'do-er upper' bikes that haven't been restored by now, this has become a good series although a shame some details go unrecorded. Please get rid of those very 'unNorton' blue sponge/flannel(!) tank mounts and the ht lead. I would do some research before opening up the inlet tract, sometimes velocity is more important on a mildly tuned engine than a percieved improvement by enlargement.
What's wrong with the blue flannel??? Just think how bad the ht lead would look without the flannel to take your eye from it. Don't worry about the inlet port, optimal cross section area is normally between 75% and 78% of the valve diameter. As standard these heads are only 62.5%. Norton left plenty on the table. You are right about the importance of velocity. The exhaust port on the other hand, is far too big. Thank you for watching.
I'm enjoying seeing how the Nortons insides are put together. Cheers
I have feeling it could be a regular thing.
@@ginner43 😁
Good video, I really enjoyed it.
Thank you
Old bikes , always fun of surprises. Never underestimate their ability to confound and exasperate you . But always worth it in the end .
New valve guides and a seat cut . Not a huge deal for a guy with your ability .
Piston looked very oily , might wanna check breather , I'm not familiar with Norton singles , so I might be talking out my arse .
Sometimes I use two gaskets on rocker covers , each one Wellsealed to metal surface and copper coat between them .
Better than grease which melts and runs away , I find .
But I love copper coat , especially on toast .
Copper is proper. A popular fraise with local plumbers. I could just let it leak and buy shares in an oil company. And you are right, the piston is a bit oily. I prefer to dip chips (fries) in my copper slip as I'm not a big toast eater.
Great video your enjoying the bike even though it has teething issues that can be sorted .. Should have shouted for a spring compressor got a few here grab one when your about .. 👍👍
Will do
These are very relaxed and enjoyable videos to watch . . I'm currently working on my 1952 350 AJS so can relate to all of the issues you are encountering and rectifying . . . 👍👍👍
Thank you. The issues are all part of the fun. I hope you enjoy your AJS as much as I do my Norton.
Due to the scarcity of quality old 'do-er upper' bikes that haven't been restored by now, this has become a good series although a shame some details go unrecorded. Please get rid of those very 'unNorton' blue sponge/flannel(!) tank mounts and the ht lead.
I would do some research before opening up the inlet tract, sometimes velocity is more important on a mildly tuned engine than a percieved improvement by enlargement.
What's wrong with the blue flannel??? Just think how bad the ht lead would look without the flannel to take your eye from it.
Don't worry about the inlet port, optimal cross section area is normally between 75% and 78% of the valve diameter. As standard these heads are only 62.5%. Norton left plenty on the table. You are right about the importance of velocity. The exhaust port on the other hand, is far too big.
Thank you for watching.
What a shame. Cant imagine a setup on a lathe to bore the valve guides and put an insert inside.
Might have a go at making some new ones, or I could be boring and buy some. I'll decide later.