I hit the patch adhesive side with a heat gun a little to pre-activate the glue, then place it on the spot and press it, that way the patch stays exactly where it has to and no need for tape and worry of slipping.
Like Gomer Pyle says “thank ya, thank ya, thank ya.” I have one of those sheets and would of never thought to use it, since watching your video no more marks on the bill! Thanks again!!!❤
Dude, not sure you how operate a one man shop, and knock out killer video's as well, plus have a life. Much respect! Will be testing out our 360 IQ real soon! Keep up the great work man!
Iv just subscribed... from sydney Australia.... love your content.. cant thank u enough... i had aspirations of started my own printing business a few years ago but fell off the wagon due to my own inexperience and lack of information and support. I then came across your videos a couple of months ago and now... thanks to you... have a new outlook and motivation to start doing what i would love to do... thank you.
Getting leather patch hats for my brand in production right now but would love to do my own eventually. Thank you for another awesome video lee! Love my rogue lab shirts too btw 💪🏼
I use Stahls for most of my stuff it’s nice seeing someone go through the same process as me. I aspire to have a setup like you have. I’m liking your brand too, that military green hoodie is 🔥. Very informative video
Hi, Hey something I know about, Leather! What is on the back of the patch to make it stick to the hat? I tool leather, and have a heat press and have some ideas...
Lee, we're ordering one of those flexible application pads and one thing isn't talked about in the video. So just real quick... we have a hotronix hat press, usually press out 6 panel Richardsons at 310 for 15 seconds at med pressure with iron on vinyls. If we use the pad you suggest, what would you increase the seconds too that you've found works?
First off -- your great love your video help! I need a bit of advice... like you my hats are melting and the vinyl didn't stick at a lower temp! What are your doing truckers at with HTV? Your lower and upper temps and time? I'd love a bit of help there! Have you done foam truckers too? If you have a successful HTV setting and time I'd love that too! Thank you so much! One girl shop here eating money on ruined hats! lol
I don't follow stahls temp settings, I find them to be way off. Lower I don't go above 200° for any sort of structured hat, then the top I run whatever temp is recommended by the material manufacturer for a top heat only heat press
Hey Man. I've been thinking about starting a brand in Nigeria Didn't know where to start from, and I've seen so many videos. Found you today! and guess what? I'm watching all your videos and taking note of things I need Basically ripping you off of knowledge LMAO I'm a software engineer btw
How does that press work on trucker hats with the foam front? Also is there a "hot fix tape" that you can apply between the back of a patch and the front of the caps and then hit the heat press? THANKS
New Sub, great video! I am just getting into the pressing business, and am waiting for my Fusion 360, I can’t wait to try the leather patches. Keep up the hard work.
Awesome video, like always! Thanks for all the tips, will definitely look into that sheet, im using a piece of the old normal sheet from my t-shirt press and can confirm what you said, it takes a lot more to arrange it properly and sometimes it does leave marks. One day, ill afford that heat press, because it definitely worth it if it passes your quality test 👌🏼 Can relate to the crunching knee noises 😅
Until then, highly recommend getting that cover sheet. It will help a lot with the marking and make your life easier for a small amount of money. I've tested so many things and nothing comes close 🤘🏻
Appreciate as always thanks for the tips and I will be grabbing some patches soon as I get *_ANOTHER HAT_* press ! the one I have is horrible ,keep being great !!
Where to buy the vinyl heat transfer leather? Or what is it called if i searched it, and how do u put print on in? Is it silkscreen or using inkjet? And how do u cut it? U use plotter or just manual cutting...i have a lot of questions sorry
What color vinyl would you recommend for that color patch. I’m trying my first and want to put Dad on a patch for a hat but my brown is too light to be seen 😞
Do you know what the flexible application pad is made of? I'd like to get one but was hoping to not have to drop $40 on one. Any links via Amazon? Thanks!! -Wes
Nice Video Bro. Can you tell me which kind of glue you use to fix the leather patch on to the cap! Till now i´m stiching each patch and i didn´t found a glue which is strong enough. THX in Advance and keep up the good work....Cheers!
What type of adhesive did you add to/apply to the back of your patches? You didn't show us that process. Could you explain below? Thanks a lot. Love your videos.
The sheet is a lot faster, the pads require more time to get the heat through. The only reason to use the pads would be for things that are delicate like 3D embroidered patches
Hello can you please share some information about the glue on the s.leather patch? It is already applied on the leather or you apply it after the laser cut? Great content
This stuff comes with the adhesive already applied during manufacturing. With genuine leather and a lot of other types of patches it's added afterwards. I'll get into that deeper sometime
Nice, I got a b10 baseball cap recently, vinyl press. was F-ing horrible when arrived. It'd so hard to find the right cap. Think is why I wanna do it all myself. I can't trust others to do what I require. Your caps look Awesome. The press looks sick but bit out of my budget. t-shirts i'll start with. Great camera btw too.
Lovin the videos Lee! You actually convinced me to buy this press. I ordered some custom embroidered patches from Stahls and the patch itself looks great, but the edges of the patch want to peel up quite easily. I've used the foam pads, the stretchy grey silicon pad, teflon, and nothing seems to keep the edges from peeling up. I've use thermo tape and the recommended heat and pressure settings for the patches (320 bottom, 280 top), pressure at 5,6,7, and anywhere from 30-45 seconds pressed and I wait 24 hours before I start picking at it. Same result every time, the edges want to peel up. Do you have any other setting suggestions? All the experimenting I've done are within the recommendations from Stahls. I'm getting frustrated and could use some help.. Thanks again. Your videos are fantastic by the way.
Have you used your hat press for pressing a patch or logo on a heavy nylon duffle bag? Would the hat press work better for a side panel if you have the appropriate sized Platten?
I haven't yet, I have interchangeable platens on my other heat press and I have a couple specifically for bags. This press doesn't have changeable platens but you can definitely use it for the right application on pretty much anything
Sup Lee! Full color prints on leather would be done on a UV printer. Wont work on Real leather though as it just absorbs the ink but Synthetic leather looks fantastic! I worked at Roland ;) Printed on the Roland LEF!
I figured they were, it was the only thing that made sense in my head. Hopefully I can add a flatbed one day but as you know the cost is pretty gigantic haha
How would this press work with something on the side of the hat? Or a partial wrap around from front to side? Great vid Lee, appreciate the content, keep it up!
The wrap around thing might be a little tricky depending on the design but it's definitely possible. The nice thing about this press is you can hit nearly every print location on a hat no problem
Great job with your videos. I just got my new hat press yesterday. I see you have your two hat presses and the fusion press on one table. Is this a folding table that can handle the weight of all three presses? If so, this will be my setup.
It's just a plastic folding table, nothing special. I put the heavy press directly over the legs to support the weight so it hopefully doesn't fall apart haha
Hey @lee Stuart ! You convinced me to get this. Hopefully they ship to Canada. Would this one work to add patches to, say, hoodies? And I have my own laser here (GLowforge) and make my own patches...I just need to figure out what I put on the back of the leather to make them stick with the heat.
They do ship here, stahls has a whole Canadian division for us. The link in the description should direct you to it. Stahls also sells a patch adhesive 🤘🏻
@@leestuart38 I make alot of leather and faux leather patches at my shop. 2 weeks ago a stahls rep told me they sell adhesive sheets for leather and faux leather so I ordered the 360 in order to offer heat pressing as well as embroidered patches. I called today to order the adhesive sheet and was told they do not sell an adhesive sheet for heatpressing leather and that I had to go on the internet and find my own source for it. I was not amused as I was also about to order the flat press for pressing the adhesive onto the leather prior to cutting the patches as the sales rep and i had discussed 2 weeks ago. Totally feel like it was a shady bait and switch to get my money for a heat press as they then went into their sales pitch of selling their service to make my patches for me with the adhesive already on the back. I was not amused. However I am happy that I didnt drop another $2400 on their flat press today and will probably shop somewhere else for it after this experience with them
@@timothyfisher7371 I had the EXACT same experience. Bought the 360, purchased the adhesive they sell per their recommended, applied to the the genuine leather patch, no dice. I called back today and they mentioned that the thermo adhesive they sell isn’t specifically for leather per day. Wasted boat loads of patches and several hats trying to “dial” it in. I just ordered a different style adhesive elsewhere to see if it will work, I’ll let you know what I find out.
Hey Lee, big fan of your work!! Your videos and content have helped to motivate me to start my own brand and slowly move from a dropshipping business model to doing things in house. Quick pro tip question...what size are those patches of hats? What do you recommend for the 6-panel yupoong?
Super cool to hear that! Glad to help. These patches were 2.5" tall, that's the max you can fit on a yupoong. To be safe I'd go a bit smaller. 2.25-2.4" is perfect height
Great video! And you saved me from beating the shit out of my hat press by showing that Stahls silicon sheet! Gonna go get one now, after I drink a beer. Good shit!
@@leestuart38 Great tip. That sheet has helped me a lot. I'm still struggling with polyester hats though. It's either too hot and streaks/burns the fabric or I can't get it hot enough for the patch to stick. Any tips for heat pressing tech fabric hats? Love the channel 🙌🏼
Where did you order your "faux" leather patches? I'm looking into those and want to be sure they adhere to the hats - what backing did you get on the patches?
STOKED the Flexible Application Pad has worked like a champ! One question for you do you take out the cardboard backing before pressing or leave it in?
Hey excellent video! I’m starting a Print shop soon, I’m buying everything little by little. But where do i get those hats? Thanks in advance if you can help me with the hats!
Don't forget to go follow @roguelabmfg on instagram, thanks!
What brand is that hoodie you are wearing?
FYI the full color leather os a sublimatable leatherette. Im sure theres other ways as well. Forgot what supplier I saw it on but it is out there.
Also... What kind of adhesive is it that u are using on the patches? Is it adhered to the patches before lasering?
@@djrerun1752 wondering the same
Could I get the information in your subsriber that does your patches? Im in the market for nice heat press patches for our hats
I hit the patch adhesive side with a heat gun a little to pre-activate the glue, then place it on the spot and press it, that way the patch stays exactly where it has to and no need for tape and worry of slipping.
Where do you order your leather patches?
@@benzeeno8150 Alibaba, if needed quicker Stahls.
I love the bloopers at the end makes me feel like I get a treat for staying till the end
What type of adhesive/glue did you add to the back of the patch to make it stick
Can u pls share link to follow the guy done that synthetic patch here
I use the thermo tape for heat pressed shirts, and never once thought to make little pull tabs to save time and energy. Great tip, Lee!
It makes a huge difference in on-press time. Glad to help!
Like Gomer Pyle says “thank ya, thank ya, thank ya.” I have one of those sheets and would of never thought to use it, since watching your video no more marks on the bill! Thanks again!!!❤
how and where can you get the adhesive leather/leatherette? i love them!!!! i have an idea for one already! say yes to hats!!!!
Did you find out?
stahls or transfer express do leather patches
Thanks!
No problem! Thank you! 👊🏻
What product do you use on the back of the leather patch to make it stick?
@Ammon mills how do I use the adhesive? Only one side is sticky
@@alex-haines9848 when heat is applied both sides become sticky, check this video out th-cam.com/video/lGPX1Q0zeME/w-d-xo.html.
Dude, not sure you how operate a one man shop, and knock out killer video's as well, plus have a life. Much respect! Will be testing out our 360 IQ real soon! Keep up the great work man!
Definitely have no life haha, the shop and the videos are my life 24/7. But I wouldn't have it any other way 🤘🏻
Just ordered the 360 after a bit of a delay to the shipments going to the UK. Can't wait to try it out for myself!
It's a great machine, you'll love it 🤘🏻
Iv just subscribed... from sydney Australia.... love your content.. cant thank u enough... i had aspirations of started my own printing business a few years ago but fell off the wagon due to my own inexperience and lack of information and support. I then came across your videos a couple of months ago and now... thanks to you... have a new outlook and motivation to start doing what i would love to do... thank you.
That's so amazing to hear! That's what this stuff is all about. Good luck!
AMAZING STYLE OF PROMOTION AND EDIT IS GREAT FROM SNAP HAT TO T-SHIRTS , SEEING EVERY SINGLE TIME I WATCH THAT PRESS !OMG
Amazon has tape dispensers for heat tape...Also best to pull down the hat's sweat band before pressing.
Just printed my first leather patch with my laser cutter. And got a weird hat for my fat head. I knew I'd come back to this videos 🤙🏼
You are goals. I'm starting out in Australia. Love your setup!
Thanks man!
Thanks for the video. Do u have the link for the patches ?
Awesome vid! I was looking for a way to hype up hat sells again, leather....gotta try it!
You deserve so many more subs! Editing is perfect.. you're so informative.. just overall perfect content, Thanks.
Thank you! Share a video and help that number grow 🙌🏻
That new lens tho, i think you have the best video quality in all of youtube bro.! Love the content, awesome as always.!
Thanks man, I'm working on that 🤘🏻
Getting leather patch hats for my brand in production right now but would love to do my own eventually. Thank you for another awesome video lee! Love my rogue lab shirts too btw 💪🏼
Hell ya! Thanks a lot for supporting man
Always spot on with great tips. Appreciate the attention to detail.
Thanks dude. Those little details matter 👏🏻
I use Stahls for most of my stuff it’s nice seeing someone go through the same process as me. I aspire to have a setup like you have. I’m liking your brand too, that military green hoodie is 🔥. Very informative video
Hell ya glad it helped. Thanks!
Did I miss the link of where to order the patches?
Stahls, The Studio... many others ;)
Have you ever tried to see them on with the Melco?
Hi, Hey something I know about, Leather! What is on the back of the patch to make it stick to the hat? I tool leather, and have a heat press and have some ideas...
It's a type of heat seal adhesive, I'm not sure what the exact stuff being used is but it can be applied to basically anything
Start the video at 3:05 to skip the promo. Great video
Your excitement makes me wanna make hats
Love your videos. Would love more on heat press for shirts and hats
Thanks for the info sir. As always great vid and info! Cheers!
Lee, we're ordering one of those flexible application pads and one thing isn't talked about in the video. So just real quick... we have a hotronix hat press, usually press out 6 panel Richardsons at 310 for 15 seconds at med pressure with iron on vinyls. If we use the pad you suggest, what would you increase the seconds too that you've found works?
I don't increase the time using the the pad. It's too thin to really soak up any heat
Woulda been nice to know what rhe adhesive in the back was...
Didnt see the link on who makes the patches?
Where do you get your leather patches sourced?
Great video. Are people still liking the stahls for embroidery patches? Or are they peeling at the edges? Anyone make them using hydbond?
Its so cool watching you working with screen printing, htv, embroidery.... that’s how a custom shop must be.
Thanks LS.
Definitely what a custom shop is all about. Can't wait to start incorporating them all together in some cool ways soon
Hats look fantastic.
Thanks!
First off -- your great love your video help! I need a bit of advice... like you my hats are melting and the vinyl didn't stick at a lower temp! What are your doing truckers at with HTV? Your lower and upper temps and time? I'd love a bit of help there! Have you done foam truckers too? If you have a successful HTV setting and time I'd love that too! Thank you so much! One girl shop here eating money on ruined hats! lol
I don't follow stahls temp settings, I find them to be way off. Lower I don't go above 200° for any sort of structured hat, then the top I run whatever temp is recommended by the material manufacturer for a top heat only heat press
Outstanding job sir!
this is what i have waiting for a long days . thanks man
Hey Man. I've been thinking about starting a brand in Nigeria
Didn't know where to start from, and I've seen so many videos. Found you today! and guess what? I'm watching all your videos and taking note of things I need
Basically ripping you off of knowledge LMAO
I'm a software engineer btw
What adhasive did you used for the leather patches
How does that press work on trucker hats with the foam front? Also is there a "hot fix tape" that you can apply between the back of a patch and the front of the caps and then hit the heat press? THANKS
Works great on truckers. There's high heat tape linked in the description
New Sub, great video!
I am just getting into the pressing business, and am waiting for my Fusion 360, I can’t wait to try the leather patches.
Keep up the hard work.
You definitely won't regret the 360, it's quickly become one of my favorite pieces of gear. Thanks for watching 🤘🏻
Awesome video, like always!
Thanks for all the tips, will definitely look into that sheet, im using a piece of the old normal sheet from my t-shirt press and can confirm what you said, it takes a lot more to arrange it properly and sometimes it does leave marks.
One day, ill afford that heat press, because it definitely worth it if it passes your quality test 👌🏼
Can relate to the crunching knee noises 😅
Until then, highly recommend getting that cover sheet. It will help a lot with the marking and make your life easier for a small amount of money. I've tested so many things and nothing comes close 🤘🏻
@@leestuart38 Does the temp or time need to change any when the stahls coversheet is used?
Where did you purchase the leather patches ?
What adhesive us used on the leather when using a heat press?
Appreciate as always thanks for the tips and I will be grabbing some patches soon as I get *_ANOTHER HAT_* press ! the one I have is horrible ,keep being great !!
Your videos are always so helpful! Thanks 🙏🏼
Where to buy the vinyl heat transfer leather? Or what is it called if i searched it, and how do u put print on in? Is it silkscreen or using inkjet? And how do u cut it? U use plotter or just manual cutting...i have a lot of questions sorry
Some freaking awesome!
What color vinyl would you recommend for that color patch. I’m trying my first and want to put Dad on a patch for a hat but my brown is too light to be seen 😞
Very cool.. What brand of hat did you use..?
Do you know what the flexible application pad is made of? I'd like to get one but was hoping to not have to drop $40 on one. Any links via Amazon?
Thanks!!
-Wes
It's worth the money
Was the adhesive question ever answered? TIA
What do you use for adhesive on the back of the patch?
Nice Video Bro. Can you tell me which kind of glue you use to fix the leather patch on to the cap! Till now i´m stiching each patch and i didn´t found a glue which is strong enough. THX in Advance and keep up the good work....Cheers!
Ever figure out a adhesive ??
Great Video... Question- What is that embroidery machine you have there to the left?
What type of adhesive did you add to/apply to the back of your patches? You didn't show us that process. Could you explain below? Thanks a lot. Love your videos.
They come with the adhesive already on there
Did you ever find something to use and the settings?
Is there a preference as to why you use the flexible sheet vs the pads that come with press?
The sheet is a lot faster, the pads require more time to get the heat through. The only reason to use the pads would be for things that are delicate like 3D embroidered patches
Hi what alternative could I use to the heat application pad plse? I'm in the UK and cant seem to find anything?
Hello can you please share some information about the glue on the s.leather patch? It is already applied on the leather or you apply it after the laser cut? Great content
This stuff comes with the adhesive already applied during manufacturing. With genuine leather and a lot of other types of patches it's added afterwards. I'll get into that deeper sometime
Nice, I got a b10 baseball cap recently, vinyl press. was F-ing horrible when arrived. It'd so hard to find the right cap. Think is why I wanna do it all myself. I can't trust others to do what I require. Your caps look Awesome. The press looks sick but bit out of my budget. t-shirts i'll start with. Great camera btw too.
This press is definitely worth every bit of what it costs, so get after it when you can and you won't regret it
@@leestuart38 do you know what baseball caps are good quality as b10 aren't good. Great videos.
Please provide a link to the heat press and the leather patches
The link to the press is in the video description. We make the patches here in house now
Lovin the videos Lee! You actually convinced me to buy this press. I ordered some custom embroidered patches from Stahls and the patch itself looks great, but the edges of the patch want to peel up quite easily. I've used the foam pads, the stretchy grey silicon pad, teflon, and nothing seems to keep the edges from peeling up. I've use thermo tape and the recommended heat and pressure settings for the patches (320 bottom, 280 top), pressure at 5,6,7, and anywhere from 30-45 seconds pressed and I wait 24 hours before I start picking at it. Same result every time, the edges want to peel up. Do you have any other setting suggestions? All the experimenting I've done are within the recommendations from Stahls. I'm getting frustrated and could use some help.. Thanks again. Your videos are fantastic by the way.
Run it much hotter than what you're being told and don't use the foam pads unless you're applying 3D embroidery patches.
What type of adhesive do u use for patches? For hats
@@mickybrooks1771 3M
What is the thickness of patch?
Have you used your hat press for pressing a patch or logo on a heavy nylon duffle bag? Would the hat press work better for a side panel if you have the appropriate sized Platten?
I haven't yet, I have interchangeable platens on my other heat press and I have a couple specifically for bags. This press doesn't have changeable platens but you can definitely use it for the right application on pretty much anything
Hi, ¿where can I buy an adhesive spary? thks
How do you not get creases on the hat?
nice work，like the green one & extra scene
Thanks 🙌🏻
Might be a dumb question but... does the leather patch have any sort of adhesive? or does the heat meld the leather with the hat material just fine?
Yes they have a heat applied adhesive on backside. All patch suppliers sell their patches like this 👍🏻
@@leestuart38 Gotcha cool thanks! Awesome quality video BTW!!
Do you order patches from stahls done. Or do you buy leather with adhesive backing in bulk
When you order from stahls they're ready to go
Sup Lee!
Full color prints on leather would be done on a UV printer.
Wont work on Real leather though as it just absorbs the ink but Synthetic leather looks fantastic!
I worked at Roland ;)
Printed on the Roland LEF!
I figured they were, it was the only thing that made sense in my head. Hopefully I can add a flatbed one day but as you know the cost is pretty gigantic haha
What thickness should the application pad be...I've found some on Amazon but they look a bit thick and not very flexible
How would this press work with something on the side of the hat? Or a partial wrap around from front to side? Great vid Lee, appreciate the content, keep it up!
The wrap around thing might be a little tricky depending on the design but it's definitely possible. The nice thing about this press is you can hit nearly every print location on a hat no problem
DOPE VID!! Thanks for all the nuggets!!!
Great job with your videos. I just got my new hat press yesterday. I see you have your two hat presses and the fusion press on one table. Is this a folding table that can handle the weight of all three presses? If so, this will be my setup.
It's just a plastic folding table, nothing special. I put the heavy press directly over the legs to support the weight so it hopefully doesn't fall apart haha
Hey @lee Stuart ! You convinced me to get this. Hopefully they ship to Canada. Would this one work to add patches to, say, hoodies? And I have my own laser here (GLowforge) and make my own patches...I just need to figure out what I put on the back of the leather to make them stick with the heat.
They do ship here, stahls has a whole Canadian division for us. The link in the description should direct you to it. Stahls also sells a patch adhesive 🤘🏻
@@leestuart38 I make alot of leather and faux leather patches at my shop. 2 weeks ago a stahls rep told me they sell adhesive sheets for leather and faux leather so I ordered the 360 in order to offer heat pressing as well as embroidered patches. I called today to order the adhesive sheet and was told they do not sell an adhesive sheet for heatpressing leather and that I had to go on the internet and find my own source for it. I was not amused as I was also about to order the flat press for pressing the adhesive onto the leather prior to cutting the patches as the sales rep and i had discussed 2 weeks ago. Totally feel like it was a shady bait and switch to get my money for a heat press as they then went into their sales pitch of selling their service to make my patches for me with the adhesive already on the back. I was not amused. However I am happy that I didnt drop another $2400 on their flat press today and will probably shop somewhere else for it after this experience with them
@@timothyfisher7371 I had the EXACT same experience. Bought the 360, purchased the adhesive they sell per their recommended, applied to the the genuine leather patch, no dice. I called back today and they mentioned that the thermo adhesive they sell isn’t specifically for leather per day. Wasted boat loads of patches and several hats trying to “dial” it in. I just ordered a different style adhesive elsewhere to see if it will work, I’ll let you know what I find out.
Hey Lee, big fan of your work!! Your videos and content have helped to motivate me to start my own brand and slowly move from a dropshipping business model to doing things in house. Quick pro tip question...what size are those patches of hats? What do you recommend for the 6-panel yupoong?
Super cool to hear that! Glad to help. These patches were 2.5" tall, that's the max you can fit on a yupoong. To be safe I'd go a bit smaller. 2.25-2.4" is perfect height
Great video! And you saved me from beating the shit out of my hat press by showing that Stahls silicon sheet! Gonna go get one now, after I drink a beer. Good shit!
That sheet is a life saver, It's all I use on hats. Thanks!
@@leestuart38 Great tip. That sheet has helped me a lot. I'm still struggling with polyester hats though. It's either too hot and streaks/burns the fabric or I can't get it hot enough for the patch to stick. Any tips for heat pressing tech fabric hats? Love the channel 🙌🏼
Where did you order your "faux" leather patches? I'm looking into those and want to be sure they adhere to the hats - what backing did you get on the patches?
Curious to know the same. What faux leather (leatherette?) and what adhesive was used?
Who is your preferred supplier for caps?
Where is a good place to get leather patches made?
I came here to try and to re-apply a leather patch to a beanie I just got from work. I’m thinking E-6000… Are you near the Rogue river by chance?
Nice video. Great tips and ideas!
Thanks!
STOKED the Flexible Application Pad has worked like a champ! One question for you do you take out the cardboard backing before pressing or leave it in?
Glad to hear, it's a game changer. Always take the cardboard out 👌🏻
Hey excellent video! I’m starting a Print shop soon, I’m buying everything little by little. But where do i get those hats?
Thanks in advance if you can help me with the hats!
What weight leather do you use for your patches?
Can you shoot us a link to where to get those patches made from? Would love to get a few custom made.
I really like the commercials he put in. There are so few of them
hey, does anyone know where we can buy sheets of leather with heat activated glue backing already on it. so we can laser engrave our own patches
Hi what size are this leather patches?
This is 2.5"
Can you use a an adhesive spray instead of tape?
Spray would be unnecessarily messy, and probably not react well with the heat adhesive on the patch
Where can i buy press on leather? Or is their different type? Im a newbie. I need help?
We need an update shop tour please!
I'll be doing more than just an update very soon 😎
@@leestuart38 Can't wait! such an inspiration
Do you know a machine to where I can I can make my own logos? Thanks in advance man!
Do you think the leather patches would work with knit beanies?
As long as they're not acrylic like a lot of beanies are. They melt in the heat press
Lee, where did you get the leather patches? Link, please....Thanks
Yes please. Need to get leather patches!
Join our Facebook print group, the info is in there
@@leestuart38
What is the link to the Facebook print group.
Hats are super clean bro
Thanks dude 🤘🏻
cool video lee hats look awesome great job
Thank you 👊🏻
What type of adhesive do you use?