Heng Long Tiger 1 RC Tank Gearbox Removal How To
ฝัง
- เผยแพร่เมื่อ 27 ต.ค. 2014
- Hey Everyone,
Here is a quick how to video on the removal of the gearboxes. Very easy and quick to do.
Any questions please ask
If you liked the video please give it a thumbs up and subscribe for more - ยานยนต์และพาหนะ
Love this video, thanks.
I'm fitting a new set of taigen 3 steel gearboxes onto my challenger 2 would I need to fit a axle support bearing aswell?
Hi just got the 3818 tiger 1 pro metal gears idle and drive wheels metal tracks, :) can you do a video on replacment of entire bottom hull. Really would help thanks
Great Job Sir. I do add a bit of Locktite Blue on the Rear Drive Screw then Two Finger Tighten. Still Removable if another Gearbox is required. Also no "Stripped" Screws. Have fun!
i dont mean to be offtopic but does anybody know of a trick to log back into an Instagram account??
I was dumb forgot the account password. I appreciate any tips you can offer me
@Joseph Amir instablaster :)
@Ephraim Jayson Thanks for your reply. I got to the site on google and Im waiting for the hacking stuff now.
Takes a while so I will reply here later with my results.
@Ephraim Jayson It worked and I now got access to my account again. I am so happy!
Thank you so much you saved my account !
@Joseph Amir glad I could help :D
which do you think would be a good ratio between speed and torque for a leopard 2a6, the 4:1 or 5:1 gear box. Also do you know what the stock heng long gearbox ratio is? Thank you
+Michael Brown 4:1 would be fine but it also depends on the turns of the motor for speed and torque.
Stock heng long would probably be 3:1
I had another question about 4:1 gearboxes from taigen. The options are 4:1 48mm shaft and a 58mm shaft, Im not sure what will fit the HL tiger1
+Darth Blob 48 mm
Rc Tanks & Trucks 24/7 , hi. , do you think those gearbox are the same than on the german panther snow leopard, heng long 3819-1 ?seems to be the same chassis underneath, tnx
+dany thibodeau they are very similar but some of the mounting holes may be different.
i ok, i see, so a bit of drilling. this. and there..should be fine tnx!
I don’t understand I got one a few months ago and I now want to upgrade it but I can’t find a video with the exact same model of tiger 1 Heng Long
* ALSO * is the Rx18 good? Mine seems fine but my remote quit workin.... idk if i got new batteries and the post is too short, thus the 'wall' blocks the connection, thus a 'broken' remote, thus, unhappy Vincent. D:
Vincent Sluga RX18 is good just for a muck around. Proportional control is stepped and the sound is very average. I would recommend the Clark tk22 as it offers great control, customisable and much better sound. Plus you can get any radio/receiver to work with it
Where can i find all the eletric part of those tanks??I only need the gearboxes,motors,H-bridge and battery pack
+Tiago Diogenes tank army, OzArmour and ebay ar a few.
Hi, I know this is old, but I just bought a Heng Long M26 Pershing with Zinc gears boxes, and I wanted to upgrade them to steel gears. How would I do that and what do I need to buy?
Hey Ronald, you would need to remove the old gearboxes and replace them with hardened steal ones. The new ones simply drop in, no mods needed.
Ronald Dang
Just the standard Black Steel Gear will do. Use a small amount of any Lithium Based Grease for the Gears. I have had good luck with Lucas Oil, Red and Tacky. Will not come off gears or Liquify. Lionel Train Moly Grease is also good. If you can't find those, plain White Lithium Grease works well, just have to lube a little more often. I covered my Gearboxes. Actually used good grade Strips of Duct Tape. Works Great. Make sure and not Bind the Top Pinion Gear straight out of the Motor and your good to go. Keeps Gearbox clean.
Where is the best place to buy a new metal gearbox for my henglong 1/16 tiger 1????
+Swagpanzer Ghosts on Blitz tank army, OzArmour are a couple. Even good sellers on ebay
Hi, I know this is really old but I just got a Heng Long T34 and I ordered a metal gearbox bUT don't know how to install. Can you help me? what would be the steps?
Hello, similar process with all tanks. The gearboxes would be secured to a metal plate, now depending on tank, the plate my need to be taken out of the tank and then the gearbox can be removed.
Have you installed the rx 18 or 2.4
Just the basic RX18
What diameter is the d shaft for the sprocket thinking of use the sprocket wheels and Idlers for a tonka bulldozer hydraulic conversion and what is the diameter of the sprocket please if u could help
Not sure, don't have it anymore
@@RCTanksTrucks247 Aww oki was looking for track system for a tonka dozer
hi i have a heng long tiger 1 and it has the plastic gears i was wondering what metal gears you would recommend asi see there are a few different typed
Amateur prepper I would recommend the black hardened steel 4:1 gearboxes. Much stronger and give you heaps of low end power
thanks for the help
RC Tanks & Trucks 24/7 Where do you find these gearboxes?
ebay
Hey Gary, I would recommend the black hardened steel 4:1 gearboxes from Taigen or even Heng long's latest premium set.
Hello, my controls are switched after reconnecting the plugs. No matter what I do when I use the remote up is left, left is up and so on
Hmm
I have just brought one of these from an auction and it doesn't go in a straight line is this normal? If not any ideas on what I will need to replace to get it too. Thanks
Trim out the steering
@@RCTanksTrucks247 thanks for the reply. It looks as if this tank might be one of the first they did as you can't adjust anything on the controller. Also the strip down on the shell is different to the one you did.
Mine has a plastic casing over the gear box and how do I disconnect the wires from the metal connectors
I figured out how to remove plastic covers on great box
Whats the best way to figure out where the wired go
There is a diagram online to help
My bb mechanism does not shoot anymore. When I push up on the left control on the controller nothing happens
The unit is cheap to buy online
Is it the same with T90
They all are very similar
I'm having trouble with finding the right size Allen key size they are either to big or to small pls help
Sorry mate, don't have the tank anymore. Generally they range from 1mm-5mm. Get yourself a set and you should be fine.
now how to install? Do i need to solder?
Vincent Sluga usually everything is plug and play buddy
So the ultimate 2 gear boxes come in with the wires already soldered in? Just new to the RC tank scene and i've already bought some upgrades for my m1a2 abrams since people recommend upgrading the gearbox, tracks, idler and sprocket wheels and the road wheels as well. It's hard to find tutorial videos on a specific tank it seems.
@@ericmagpantay7693sounds like you have a older version they're all soldered in. If you have a little butt connectors you can connect them like that it's only two red and two black I believe so it shouldn't be that bad
@@RCTanksTrucks247he had the older version they're all soldered in
I upgraded gear boxes to metal but now I'm trying to put the wires back where they go
They connect to the rx18 control board.
Mine isn't really clear where the wires go
🤔