@@alosaloda Białoruś nie jest w stanie wojny bo żadnej wojny nie ma jest tylko "specjalna operacja wojskowa" Ale to że z Terytorium Białorusi Rosyjskie wojska Atakują Ukrainę to jest w porządku i Białoruś jest święta i umywa ręce jak Piłat. To tak jak by było dwóch przyjaciół Rusek i Białorusin stoją obok siebie a na przeciwko nich Ukrainka Rusek ją gwałci i zabija a Białorusin tylko patrzy a potem obaj idą na piwo :) Dosadniej już się nie da tego określić.
Really InTeReStiNg. Thank you for speaking in English. Much appreciated. Very COoL servo (gear stack and billet housing). You know now that you've taken it apart I don't think the company will honor the warranty Cheers from So.Ca.USA 3rd House On the Left.
motor looks very like a common inkjet printer motor as well, no surprise to have an existing commercial motor there, making it cheaper to make. Case looks like it is spin cast, not machined, the tooling marks are from the original mould, the rounded off soft corners on the marks are a give away. Might have some minor work done on it to finish it, but definitely a spin cast item. At least that donation to the Ukrainian war effort will not go to waste.
4:39 j'ai du mal à comprendre vos intentions : j'ai posté en commentaire le nom de l'Iranien, du Chinois et du Russe ( trouvé en 5mn ,merci google) et mon post a été supprimé ... par vous où par youtube ?
not necessarily, there are many ways how to smuggle . Even US military components are in Russia recently sold by HU company in US via Spa8n, Serb, ... to RU
well rest of the world outside eu/usa does not realy care with embargo... everything produced in china... and they is in a same trading alliance in the brics.
6 mosfets => 3 half bridges for the drive of 3 windings of the brushless motor. Other pins are for the magnetic sensors.
yee its a brushles motor :)
Looks pretty well made for such an inexpensive drone
That was an unusual video! It is actually almost a journalistic investigation attempt! Thanks a lot!
The ball bearing at the bottom of the arm does not indicate poor quality.
considering the use for the drone, using cheap components that do the job for the limited amount of time the thing has to fly is a good strategy.
Amazing what you can do with off the shelf stuff
It may be thre-phase AC sycronous motor 14:52 because a 6 swtches may generate three-phase voltage
Я собрал 4 сервопривода от бпла Коса. Американские. DB961WP. Они стоят 170€ за штуку. Хорошие сервы. Пригодятся мне для авиамоделей.
That looked like a Nichicon capacitor which are very good quality.
wow, Rubycon caps
Yeah! Apparently those sanctions aren't doing anything
more likely a "I wish i was a Rubicon" cap from China.
@@alosaloda Iran has had massive sanctions for even longer than Russia though
@@alosaloda so sorry 🙁. As if we need any more proof sanctions only ever hurt the civilians and the governments can always get around them regardless.
@@alosaloda Białoruś nie jest w stanie wojny bo żadnej wojny nie ma jest tylko "specjalna operacja wojskowa" Ale to że z Terytorium Białorusi Rosyjskie wojska Atakują Ukrainę to jest w porządku i Białoruś jest święta i umywa ręce jak Piłat. To tak jak by było dwóch przyjaciół Rusek i Białorusin stoją obok siebie a na przeciwko nich Ukrainka Rusek ją gwałci i zabija a Białorusin tylko patrzy a potem obaj idą na piwo :) Dosadniej już się nie da tego określić.
A similar servo torn down at the following video.
"LDM #367: Shahed-136 kamikaze drone servomotor" by Le labo de Michel
Really InTeReStiNg. Thank you for speaking in English. Much appreciated. Very COoL servo (gear stack and billet housing). You know now that you've taken it apart I don't think the company will honor the warranty Cheers from So.Ca.USA 3rd House On the Left.
The connector is a Micro D, very high performance and very expensive, at least for the original ITT Cannon ones.
Would be good to see where the controller chip and mosfets are made. Chinese fab or not?
motor looks very like a common inkjet printer motor as well, no surprise to have an existing commercial motor there, making it cheaper to make. Case looks like it is spin cast, not machined, the tooling marks are from the original mould, the rounded off soft corners on the marks are a give away. Might have some minor work done on it to finish it, but definitely a spin cast item. At least that donation to the Ukrainian war effort will not go to waste.
It's a 3-phase BLDC-motor, cheap inkjet-printers have standard DC brushed motors. So not the same.
4:39 j'ai du mal à comprendre vos intentions : j'ai posté en commentaire le nom de l'Iranien, du Chinois et du Russe ( trouvé en 5mn ,merci google) et mon post a été supprimé ... par vous où par youtube ?
Ce n'est pas moi non je dormais... ce doit être un robot de youtube 🤖
@@msylvain59 merci bcp d'avoir pris le temps de me répondre, votre vidéo est à très haute valeur ajoutée, chapeau !😁
Congratulations on your excellent English! Rare de trouver un français maîtrisant aussi bien la langue de Shakespeare!👍🏼 Excellent video as well!
thx
Datecode 2306. So the Chinese breaking the embargo and delivering stuff to iran.
not necessarily, there are many ways how to smuggle . Even US military components are in Russia recently sold by HU company in US via Spa8n, Serb, ... to RU
well rest of the world outside eu/usa does not realy care with embargo... everything produced in china... and they is in a same trading alliance in the brics.
basic cad skill but decent parts and materials.
Видео отличное. Всегда интересно подсмотреть чужие технические решения... но, пожалуйста, подстригите ногти!
Was this cheap? Of course it is, it's only for single use, wise man..😁
Hobby king special Chinese written all over it.
this crap flies by almost every day after midnight, so nothing special
Where Did You Got this😮?