Hey Mr.brian I’m currently watching your video from Saudi Arabia and studying for my major exams Thank you very much for your videos it’s really helpful 🙏
Watching from CAMEROON. National Advanced School of Engineering Polytechnic MAROUA Cameroon. Thank you. I wish you upload fast😂😂 I'm are following. Merci beaucoup enchanté de vous rencontré❤
My first Cameroon viewer! Thanks so much for watching. I'm mostly working on Fluid Mechanics videos this summer. If you are in Graphics now, you might not be ready for these yet, but you'll probably take that course in a year or two. I may be sprinkling in a few graphics videos though.
Hello , I al trying to master the missing lines problem so i need more practice but I can’t know weather my finished views are correct or not At 0:04 you provided a sheet full of missing line problems, can you also provide the solution to that sheet so i can be able to practice.thanks
Sorry, but i dont have the answer key either. thats why i made inventor drawings in this video to double check. i have a playlist with several other missing lines and missing view videos, so that will give you a few more worked out examples. not as many as a full sheet, but best i can do. good luck.
I'm on a problem almost exactly the same as 4:48 except the side view has an inclined slope on the top left instead of another corner. I can't seem to figure it out and my professor isn't giving me hints. Any ideas?
In that scenario, I think the top view will have 2 diagonal lines instead of horiz/vert pairs. And you'd still also have the same horizontal line on the front view. Instead of the final 3d image looking like there's a flat "shelf", the front most 2 points of the shelf would connect directly up to the top point of the triangle, so you'd have a triangular slanted face instead of a horizontal and vertical face. A diagonal line on 1 view, will be a visible face on the other 2 views. Your new diagonal line will correspond to a triangle on the front view, so you'll see that same triangle on the top view also.
If you mean the answer key to this page of missing line sketching problems - no, I do not have an answer key - that's why for this video I drew 3D models of each part as a way to check my answers without a key. If you just mean to life in general ... then also no. I like to think I am good at giving general advice and even good at answering most engineering questions ... but no, not all of them. That would be pretty awesome though.
The 3 circles on front view: outer circle is a solid cylinder in the back, middle circle is solid cylinder in front, small circle is a hole presumably all the way through. Need to add hidden lines for the hole on both top and right. top view has a few visible lines where the middle circle has its top cutoff.
![[ ออกกอง ] วัยหนุ่ม 2544 โลกหลังลูกกรง..ทัวร์กองถ่ายหนังใน "คุกของจริง" | JUSTดูIT.](http://i.ytimg.com/vi/vB--aOkZCpw/mqdefault.jpg)
Which of Indy's green screen skits was your favorite?
Hello, I'm from Istanbul, Turkey. I really appreciate your work, thanks for it.
TA Indy says 'your welcome'. Technically he said "meow", but I think he meant your welcome.
Hey Mr.brian I’m currently watching your video from Saudi Arabia and studying for my major exams
Thank you very much for your videos it’s really helpful 🙏
Awesome, thanks so much for the post card. Good luck on your major exams!
Hello , we are students of Indian institute of technology ,Roorkee . Thank you , we appreciate your work.
This is the first comment I've received from Uttarakhand. I'm really glad my video helped you.
aur bhai ho gyi tyari🤣🤣
@@bhaweeshsharma2220 😂😂, bhai billi itni bdya thi ki comment krni hi pad gayi.
kaise kiya arpit bhai
@@BrianBernardEngineering You know your Indian geography hahaha
Watching from CAMEROON. National Advanced School of Engineering Polytechnic MAROUA Cameroon.
Thank you. I wish you upload fast😂😂 I'm are following.
Merci beaucoup enchanté de vous rencontré❤
My first Cameroon viewer! Thanks so much for watching. I'm mostly working on Fluid Mechanics videos this summer. If you are in Graphics now, you might not be ready for these yet, but you'll probably take that course in a year or two. I may be sprinkling in a few graphics videos though.
You have some great content and the kitties in your video are a win win! You have a subscriber from a fellow cat lover
Thanks so much. Indy and Serenity both love getting in the way while I'm filming, so I decided to embrace it.
Please help me on number 22 top view
From Bakersfield, California is where I reside and where I be watching
Hi from Texas. Thanks so much for watching. TA Indiana says Meow.
hi ,shubham here from IIT roorkee
Oh - I sort of know one of your classmates. If you see Arpit Maan, tell him I said hi.
Hello , I al trying to master the missing lines problem so i need more practice but I can’t know weather my finished views are correct or not
At 0:04 you provided a sheet full of missing line problems, can you also provide the solution to that sheet so i can be able to practice.thanks
Sorry, but i dont have the answer key either. thats why i made inventor drawings in this video to double check. i have a playlist with several other missing lines and missing view videos, so that will give you a few more worked out examples. not as many as a full sheet, but best i can do. good luck.
I'm on a problem almost exactly the same as 4:48 except the side view has an inclined slope on the top left instead of another corner. I can't seem to figure it out and my professor isn't giving me hints. Any ideas?
In that scenario, I think the top view will have 2 diagonal lines instead of horiz/vert pairs. And you'd still also have the same horizontal line on the front view. Instead of the final 3d image looking like there's a flat "shelf", the front most 2 points of the shelf would connect directly up to the top point of the triangle, so you'd have a triangular slanted face instead of a horizontal and vertical face. A diagonal line on 1 view, will be a visible face on the other 2 views. Your new diagonal line will correspond to a triangle on the front view, so you'll see that same triangle on the top view also.
@@BrianBernardEngineering I actually managed to get it figured out! Thank you and great video!
Hi sir, do you have all the answers?
If you mean the answer key to this page of missing line sketching problems - no, I do not have an answer key - that's why for this video I drew 3D models of each part as a way to check my answers without a key. If you just mean to life in general ... then also no. I like to think I am good at giving general advice and even good at answering most engineering questions ... but no, not all of them. That would be pretty awesome though.
SOUTH AFRICAN REPUBLIC, CAPE PENINSULA INSTITUTION OF TECHNOLOGY.
Thank you so much for replying. This is my first ever comment, not just from your school, but from South Africa at all. Good luck in your course.
What about number 22 I still can't figure out how to do it. I been stock with it for more than a month now.
The 3 circles on front view: outer circle is a solid cylinder in the back, middle circle is solid cylinder in front, small circle is a hole presumably all the way through. Need to add hidden lines for the hole on both top and right. top view has a few visible lines where the middle circle has its top cutoff.
How does the top view looks like with few visible lines for the middle circle top being cut off, please help me ?
I'm from Istanbul Turkey i will be in US soon if I pass my drawing exams tomorrow I'll bring you Turkish delight if I pass
good luck on your exams!