RC Glider SIMPLE LADY V3, Full Build From SCRATCH and MAIDEN. RC airplane 3D printed bungee hi start
ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2025
- A wonderful RC glider is ready that is easy to build and very easy to fly. 3D printed fuselage and carbon-balsa wing. How to do it yourself, see the video...
Bambu Lab X1-Carbon Combo:
shareasale.com...
Bambu Filaments
shareasale.com...
Simple Lady V3 Drawings:
grabcad.com/li...
This video is sponsored by PCBWay.
If you are interested in electronics and technology, this is the place for you. Very easy and convenient to order PCB boards, CNC milling, 3D printing and much more for your projects
www.pcbway.com
ATTENTION
LOOK HERE
PCBWAY 9th Anniversary SUPER Special Offers.
LINK www.pcbway.com...
Carbon Fiber Reinforced High Temperature Nylon Filament
eu.store.bambu...
Carbon Fiber tubes
www.r-g.de/en/...
Robbe Modellsport FS 166 BB MG DIGITAL SERVO
www.lindinger....
Robbe Modellsport SWITCH HARNESS GRAUPNER WITH CHARGING WIRE 1PCS
www.lindinger....
ORACOVER IRON-ON FILM MAGENTA TRANSPARENT 3 METER # 73
www.lindinger....
PICHLER RECEIVER BATTERY 2700MAH 4.8V NIMH CUBE UNI PLUG TEAM CHAMPION
www.lindinger....
/ @markoroolaid
RC World of Model - Facebook Group
/ 453983092600613
Liituge kanaliga, et saada juurdepääs hüvedele:
/ @markoroolaid
@Marko Roolaid
Thank you for watching.
SUBSCRIBE
COMMENT
LIKE
ROOLAID
/ roolaid
grabcad.com/ma...
#rcairplane #rcglider #giantRC
Another beautiful creation from a master craftsman !
This is brilliant Marko! I tried to make your DLG from a couple years ago but failed epically. I think I will try this one!! Thank you for your amazing work.
Looks really well, as always! Great flying!
Found this while looking at Grabcad. The "Lady" part caught my attention. My first ever RC plane was the Gentle Lady in the late '90's. It was already an old design then (all Balsa frame with some plywood, standard tail). The Lady had many alterations after that and the only similarity to this one is the wing layout and no ailerons. Glad to see she still lives on. Wish I had a 3D printer then when I was building gliders, hehe. (actually, flying got me into 3DP).
Nice job, thanks for the memories!
That build is beautiful and flies amazing! The endcap elevator/rudder control surface horns are genius! Very nice!
thank you so much
It's beautiful mate, very nice build, awesome bungee and very nice flying :)
You've outdone yourself again.
Just beautiful (but the backgroundmusic is killing me 😁 )
I like the printed caps on the V-tail, very neat. 👍 great little aircraft.😊
Your video was excellent, too ... maybe some links about how and why cliff soaring can build up these tremendous speeds ... I saw one a while back --- all very interesting. I am a graduate of the Lawrenceville School Class of 1965... I essentially introduced at that time model u-control airplanes, hand launched gliders and snow racers --- .020 and .049. There was latent interest and when I went out playing it started a land slide.
A friend built me a single switch channel, radio control with a vacuum tube (HAHAH) with a rubber powered escapement in the plane --- rudder control only... It had to cycle through the right then left sequence. But the best fun was hand launched gliders. I was a good javelin thrower - still hold a school record for 10th grade ---3rd form --- so I could get some height. One Sunday I caught a Thermal and away the balsa glider went --- just 18" x 3"-inch wings, spruce body and plasticine balancing on the nose... About 2 minutes later and it was out of site and off the school's 600 acres of property... no return address... could not follow it. Earlier that year a friend took me to Lake Hurst NJ for the indoor nationals ... So interesting ... the gossamer planes with 60-minute flight times under 90-foot ceilings in the blimp hangars.... But I could only register 30 seconds --- and others for HL Gliders were getting 60 seconds --- reaching the 90 foot top... Something is really lost today when kids do not design, build and fly something --- there is lots of engineering to be learned from this experience -- now it is TikTok and seeing who does the stupidest things.
I love that rig that you made for setting the foils' profiles in the right place.
Ok, thank you very much
Boah, ich kann ja gar nicht mehr aufhören dir zuzuschauen.
Könnte ich die Bauteile von dir bekommen?
Wow, very inspiring video! I like this simple glider (just V-tail). Beautiful wings! Bravo, you have done!
Хвост полное фиаско
X образное лучше
Another amazing creation! I am really enjoying all your latest videos that include flights. I was surprised that you opted for a removable dihedral, since you need to tape it up prior to every flight. I guess at some point you can simply decide to glue it. I love your mix of contemporary and modern building techniques. You are the #1 RC builder on TH-cam!! Congratulations on yet another stunning build! You Rock!
Thank you so much for this wonderful comment. This kind of praise always makes the mood very good:)
Impressive. Looks like a great flyer
👍👍👍 Grandios! CNC, es muss ein Traum sein, heutzutage Modellbauer zu sein .
Все намного проще делается без станков.
Simple Genius. Love And Respect. From India
Thank you👍👍👍
You live in a nice area to fly. Much better than urban areas !
Congrads on your PCBWay sponsorship !
Thank you
Nice to see Roolaid 2.0 likes Dad's hobby too !
@@MarkoRoolaidполная фиаско братан.
Планер не так прост как кажется
1 размах должен быть больше 3-х метров.
2 специальная куртка крыла позволяет стоять в потоке.
Я уже 4 года не делаю планера.
В ангаре 2 карбоновых планера supra и xplorer3
Вот это авиамодели, а не игрушки.
BEAUTIFUL WORKMANSHIP
Thank you so much
Very nice, thanks for sharing.
i miss flying rc.... this looks very fun and peaceful compare to 3d heli looks fun to make also
👍👍👍
What a legend 🫡🙌❤
🫣🫣🫣🫣
Great stuff! Reminds me of the Introduction F5J, but smaller. Looks fantastic!
Brilliant and beautiful
Amazing glider seen ever.
thank you
@@MarkoRoolaidпередняя кромка не обшита
Флаттер обеспечен
Great vid, Thank You for sharing..
Wow! It’s so good!
Très belle réalisation, magnifique atelier, bravo
thank you
great build! good video as well.
thanks
Awesome creation Man !! Your a genius..
Thank you very much :);):)
This is awesome Marko! Superb!!!
So cool. I love your videos and creations. Id love to buy this when you decide it’s ready for a new owner.
You’re the best! Thanks for this great content ❤
thank you so much
Awesome job Marko!😎👊
Great job, amazing plane !
espectacular, great Job!!
Beautiful!
thanks
Bravo Marko 👏👍
pure craftsmanship
Thank you so much
Great work Marko
Very nice.
As usual 👍
Incredible. Not sure if you’d sell some of your builds. Anyone would be lucky to own one of your creations. Absolutely stunning build quality. Up there with the best of them and I’d say you’re number one. Sorry Ramy!
OMG ;):):) Thank you so much
Take care using superglue. I used it a lot and became allergic to it. If I use it now I get bad hay-fever like symptoms for several days. Use a desk fan to blow the fumes sideways.
ok, thanks
Really nice work! Bravo!
Superb !!!
thanks
Amazing!
Great work as always Marko
So, I am making a mashup using wings and tail from the Simple Lady and fuselage from the Electric DLG(printed 25% larger) My first laser cutter project. The wings with the CF rods are an easy build, genius really. Just waiting on the 16mm CF main spar. Fuselage with motor is all done. V tail with servos is done and configured. Can't wait to fly it!
Hi, wow, that's great to hear. Be sure to share a video or pictures, it would be great to see. Anyway, it's wonderful that my projects have really touched someone and they have tried to imitate them
Wow very nice ! Wing is stronger than I thought! :D
The wing is really strong. Carbon fiber- just amazing
Beautiful glider! Can you tell me what the degrees are on your v trail? Thanks Mike
asi vale la pena volar planeadores , que calidad .
Muchas gracias por este comentario. Saludos desde estonia
@@MarkoRoolaid no hay por que , soy aeromodelista de bajos recursos y no llego a esas maquinas , pero las veo volar y me quedo extasiado , pero asi mismo e llegadoa construir buenos motoveleros que me llevaron al tercer puesto del nacional de mi pais , te envio mis mas sinceras felicitaciones desde Argentina un hombre de 78 años aeromodelista desde los 6 años , abrazo.
Купи супру или Эксплорер размахом 3,4-3,8 метра и летай.
Это не планер а глупая игрушка
very nice
Thank you
What beautiful execution of your plan! At 1:35 what kind of plane are you using?
Nice job!
Do you share your stl? The V tail adaptator is very smart
Bloody marvellous. Again! Where do you find the time? Nice use of the Bambu X1C. It did not quite change my life, but its as close as I have to a star trek replicator - excellent machine.
Espetáculo! 👏🏻👏🏻👏🏻
Really nice. Beautiful looking plane. Just out of curiosity, do you get any adverse roll with rudder input? The V-tails wants to roll the plane in the opposite direction of the turn but it is easily compensated for with ailerons but you don't have ailerons. The wings might be just so big they just resist the roll tendency?
If there are no ailerons, the wing tips must be up, which is how automatic stabilization occurs. As in free-flight aircraft
Hi Marko, nice design, congratulations. I ask why you used the CF 18 x 8? Is it possible to modify it to a single standard size? In this part of the world those types of tubes are not found.
You can still replace it, but you have to make sure it's not too heavy. Otherwise, the CG will not be in place
Is it possible that you can provide me with the editable file to redesign the thickness of the carbon tube of the fuselage? I have thought about putting a 10 or 12 mm tube
Great creation! I’ve been interested in the CNCs. Can you share what CNC machine are you using for your builds?
hi, All my CNC machines were bought here www.stepmores.com/
Очередной шедевр, поздравляю Марко! За воздух держится как Орёл! Марко,подскажи какой вес и угол между стабилизаторами.😊
Привет. Спасибо. Стабилизаторы (2шт) весом 30г. Угол V-образного оперения 110 градусов
@@MarkoRoolaid А общий вес планера?
Весь планер весил 632 г.
@@MarkoRoolaid Спасибо!
Few questions
Is it easy to control
Does it feel different to a more conventional rc plane
And that’s a it something that a beginner could fly
This aircraft is extremely easy to fly and control. It practically flies by itself and is perfect for beginners.
@@MarkoRoolaid cool, do you sell these and if yes: do you sell the parts to put together or do I have to print it myself???
Hola Marko, de verdad que tus videos me encantan, actualmente estoy estudiando Ing. aeronáutica y tengo un proyecto de un planeador, en América no puedo encontrar el tubo de fibra de carbón que usas al menos todo es recto, tendrás el numero de parte para mandarlo a pedir a Europa? Saludos.
Very nice build! What diameter is the carbon tube for the fuselage please? Inner diameter too, if you know it. Thanks!
hi, Carbon fibre tube -TAPERED- 3k-PW (18.3 x 8 x 0.3) x 1100 mm link here www.r-g.de/en/art/77100503
Great job !!! Could you explain how the wing is attached to the fuselage? Do you use screws directly screwed into the pla fuselage without a threaded insert or nut?
Thank you !!
Hi, bolts and impact nuts, look here th-cam.com/video/3Y7XlT0Y_e0/w-d-xo.htmlsi=NO0dOcqjBRISwONu&t=307
That's a thing of beauty! What kind of winch/bungee do you use?
My bungee hi start system is already 20 years old. It was probably produced by the ROBBE company. But the rubber has a diameter of 5mm and a length of 30m and I use fishing line 0.6mm 140kg, length 120m
Hi is possible to throw this glider from turnover holding glider for wing ?
I understand that you mean a DLG-like launch. The answer is no
Hello Marko! is it possible that you share some details about the print settings for the fuselage parts ? (vase mode for nose ? , and for the other parts, infill percentage, wall numbers etc ? ) Great thanks. have a good day, and congrats for your job !
The nose cone is made with Vase mode, the rest normally. Fuselage 2 layers and 3% infill. I'm going to try and experiment myself, many details straight into the trash :) But as usual, as strong as possible and as light as possible
@@MarkoRoolaid thanks for your feedback !!
Hi I would like to have your opinion I would like to reinforce lwpla but without weighing it too much because the lwpla and really not solid what do you think of covering with Epoxy resin then sanding then painting? Thank you for your opinion ;)
Hi, This is a very good idea. I would do exactly the same
Tell me which camera worked in the air from the glider wing
Hi, DJI Action 2
Без элеронов такой размах, это жесть
Thanks for last rely neat, unfortunately didn't get the 'svg' files??
Hello, thank you. I have not shared the SVG files. I only have STL and DXF files
Marko I’m 65 years old turning 66 in a few days would you build one for me for my birthday. I don’t have laser cutter or a 3d printer or maybe you can just make the parts and I could assemble it. I started building RC planes in 1978 . Thank you. I had a house of balsa two-t that was destroyed by an inexperienced pilot. You do great work thank you for sharing
what is the name of the height sensor that shows how high the glider was?
👍
Tried to download files for this cool glider but couldn't get past the Traffic light, steps, security part!!??? Can you help?
hi, try this link www.thingiverse.com/thing:6116359/files
hello, where Can i buy the carbon fiber tube for the boom? it ios a diminishing diameter tube and there is no information . thanks
I need the same information ????
Marko. Can you provide pdf files for the glider? I want to build the old fashion way. Thanks
I am not going to make a PDF version separately. But you can definitely find a program that opens dxf and then you can also convert it to pdf format.
It helps to have a 3D printer and a laser cutter right? Nice job but little to do with real building
These machines still help. But all models can also be made without CNC machines:) I know because I have been making them this way for 20 years
Do you sell the laser cut balsa parts? I'm not ready to invest in a $1000+ system and I can not find anyone locally who cuts parts.
Forza Ferrari !
Track name?
Richard Jarel's v-tail is similar but a two piece. I've made mold's of his Impulse glider and made them when I needed them. Your's would be an up-grade to what I've done.
No esc?
No 👍👍👍
Make it powered it's more fun.
I can't see the motor please explain it to me where is it
A glider does not need an motor:)
17:05 WRONG !!!!!! in a hi-start, the ratio of rubber to line should be about 1 to 20 !!!!
I have never heard anything about this ratio. Could you please explain why 1:20 is correct?
whats the wing span????
@@ozjohnno Hi, 2000mm
🥇🥇🥇🥇🥇🥇🥇