Dude, thank you! I had a tiny tiny piece of metal in the plunger. Great to be able to fix something with only an Allen wrench and a needle nose. Very helpful to watch someone take things apart ahead of time.
Great video. I borrowed my sister-in-law’s nailer and quickly jammed it up. The manual tells you to remove the front plate but says nothing about looking in the cylinder. Works great now. The only thing that I would add is to watch for the little black spring. I didn’t see it fly out when I opened up the top. Luckily I didn’t lose it.
Awesome video, thank you. My Porter Cable pin nailer is not up to the job, now I got an idea how to git er done. Thanks again for a no BS video, great job!
Thx. You gave me the motivation to take the cylinder head off and clean out some gunk and maybe a couple bug larvae that were near the top. No idea exactly what the problem was but it's working now.
Great. Mine stopped working just after I hit more than one nail in fast succession but did not look at the time and finished the job with regular hamer and nails. Will look tonight as I'll need the thing again.
I'm a stapler from Harbor Freights and the plunger always gets jammed I always need to get a little hammer and Tinker it down to go back in so yes again thanks for the video
Hi, I have an Airmaster pneumatic hammer for nails and staples that no longer knocks. Air comes out when the button is pressed, but it doesn't beat anymore. SUGGESTIONS?
Thank you! I disassembled it and found a staple that blocked the striker. That's why only air came out and it didn't hit the staples. I greased it and now it's very OK. I dared to open it after watching your movie. I said to myself: WHY NOT ???
Help! I have a new brad gun, worked for a day, now pressuring it up to even 140, it starts hissing air out of the relief on the very back of the cylinder (facing you is you hold it straight out like a gun.) That end has a plastic cap and it can be turned 360 to change the direction of the venting air. It will not stop leaking, and at anything up to 140, it simply will not "fire". Some difficult folks think it is junk and wanna tear it to pieces, I just think it might be something more simple. It likely was a harbor freight.
Maybe lack of lubricant in the cylinder or just a bad machining job. Running it at 140 sounds like trouble. If you bought it at harbor freight you should have 90 days to switch it out no questions asked.
Mine works but the problem is when I shoot once n go to shoot again it won't work unless I disconnect the air hose n plug it back again then it shoots n repeat to go shoot again
Sorry for the late reply. Is it well oiled? It sounds like maybe the piston is not returning properly. Could be lack of lubricant. Or debris in the cylinder, or a faulty O-ring. If there's no noticable issue than take it apart. Spray everything down with WD-40 let is soak for about an hour. Reassemble and see if that works. Hope that helps.
![Ryobi P320 Brad Nailer Won't Shoot Nails - Easy DIY Fix [Condensed Step-by-Step]](http://i.ytimg.com/vi/Injca-Bh1NE/mqdefault.jpg)
Grabbed mine out of the trash, took it apart, made sure it was clear, reassembled and now it works. Thanks.
Right on!
Dude, thank you! I had a tiny tiny piece of metal in the plunger. Great to be able to fix something with only an Allen wrench and a needle nose. Very helpful to watch someone take things apart ahead of time.
I have just fixed my nail gun that misfired thanks to this video. Turns out that a a piece of a broken nail was jamming up the gun. Big thanks !
Thanks. Took mine apart, cleaned and relubed. Works great!
Great video. I borrowed my sister-in-law’s nailer and quickly jammed it up. The manual tells you to remove the front plate but says nothing about looking in the cylinder. Works great now. The only thing that I would add is to watch for the little black spring. I didn’t see it fly out when I opened up the top. Luckily I didn’t lose it.
my o ring was out of of track, pushed back and voila working again, thanks my dude!!
Thanks for that! It was easier to disassemble than I feared. Mine was gummed up with oil that had solidified like hard beeswax.... now like new!
Awesome video, thank you. My Porter Cable pin nailer is not up to the job, now I got an idea how to git er done. Thanks again for a no BS video, great job!
Watched video. Pulled mine apart. Lubed and reassembled. works great now. Thanks! Much appreciated.
Thx. You gave me the motivation to take the cylinder head off and clean out some gunk and maybe a couple bug larvae that were near the top. No idea exactly what the problem was but it's working now.
Great video..
All most thru my nailer in the trash..
My plunger was stuck..
Now works like a charm...
Awesome, excellent video. My pin nailer has been fixed!
Great. Mine stopped working just after I hit more than one nail in fast succession but did not look at the time and finished the job with regular hamer and nails. Will look tonight as I'll need the thing again.
Took mine apart. Put it back together and it chooches just fine now. Thanks!
fixed my cheap Menards gun in 15 minutes after watching. Thx !
Thank you for for taking your time to make this video! It was GREATLY Appreciated! Problem Solved!
Thank you for watching!
Thanks for posting this helpful video!
Ty I am pulling my 18 ha craftsman apart tomorrow 😁
Thanks brother. Saved me on a job site. 😍
Glad to hear it
Thank you so much , it was a bent nail. works great !
Glad it helped!
Thank you for the lesson you just got me out of a tight spot
Thank you, this video helped me!
Thank you so much for this video!!
I have a brand new numax..never fired from first time trying. I'll try your process. Hope it helps. Thanks. Good vid for newbies.
Nice vid, helped me know what to expect, now i'm goin in my fairly new Central pneumatic nailer too.
I'm a stapler from Harbor Freights and the plunger always gets jammed I always need to get a little hammer and Tinker it down to go back in so yes again thanks for the video
Great video, I'm back in businesss!
Great video - thanks for posting
Great video, thanks!
Do u think this is typical with most air nail guns 16/ 18 gauge?
It's very common on the small gauge nail guns. Also guns not being oiled can make them misfire and jam.
Very helpful. Thanks for posting. 👍
Hi,
I have an Airmaster pneumatic hammer for nails and staples that no longer knocks. Air comes out when the button is pressed, but it doesn't beat anymore. SUGGESTIONS?
Hard to say without looking at it but my first recourse is always to disassemble it, clean it, and look for anything broken or corrosion.
Thank you!
I disassembled it and found a staple that blocked the striker. That's why only air came out and it didn't hit the staples. I greased it and now it's very OK. I dared to open it after watching your movie.
I said to myself: WHY NOT ???
Glad it worked!
Appreciate the video. Such a simple fix! Was worried I'd have to buy a new gun lol
I have the same problem. Do you think I can try to take all apart with my Dewalt brad nailer?
Yes they are made to be serviced and most of them work similarly.
@@CNTHINGS Thank you!
thanks man for camera and repair
Help! I have a new brad gun, worked for a day, now pressuring it up to even 140, it starts hissing air out of the relief on the very back of the cylinder (facing you is you hold it straight out like a gun.) That end has a plastic cap and it can be turned 360 to change the direction of the venting air. It will not stop leaking, and at anything up to 140, it simply will not "fire". Some difficult folks think it is junk and wanna tear it to pieces, I just think it might be something more simple. It likely was a harbor freight.
Maybe lack of lubricant in the cylinder or just a bad machining job. Running it at 140 sounds like trouble. If you bought it at harbor freight you should have 90 days to switch it out no questions asked.
I like your style!
Great fix.
Thank you boss 🙏
Thanks really helpful, gives me the confidence to open mine up, to look for the problem
Fixed my HUSKY nail gun by following the video. Thank you!
Excellent
I just bought one hun!
DeWalt brad nailers
awesome thanks , need to try to fix mine
Mine works but the problem is when I shoot once n go to shoot again it won't work unless I disconnect the air hose n plug it back again then it shoots n repeat to go shoot again
Any advice to fix my problem
Sorry for the late reply. Is it well oiled? It sounds like maybe the piston is not returning properly. Could be lack of lubricant. Or debris in the cylinder, or a faulty O-ring. If there's no noticable issue than take it apart. Spray everything down with WD-40 let is soak for about an hour. Reassemble and see if that works. Hope that helps.
Nice job👍👍👍👍
thanks sir
Thanks man - I also fixed mine
Very helpful ! This for sharing
Thanks !
Thank you!!
Thanks for video
Thank you.
Nice job!!! Thank you!!
2:39 ……let see if she chooches😂😂😂😂
Thanks
My one blows air from the back
Maybe the back seal is cracked somewhere.
Skookum!
AvE!! lol
What is "chooches"? Lol... you said "lets pull the nail out, put it back together and see if it chooches"???
Chooches: When something works the way you want it to. Check out AvE channel for more funny words.
@@CNTHINGS here is my addition to Chooching
th-cam.com/video/YSFbKti0HY4/w-d-xo.html
@@ComedianJoelCooper Haha! Hilarious 😂
@Derrick Smiley which spring are you referring to?
Thanks
Thank you