So I just did this on my jeep. I mounted the controller under the center console inside the Jeep and had all the wires come out through the e-brake cable so this way I would have enough wire coming from every light to go wherever I want on the Jeep and just extended the wires from my controller to my battery
Awesome. I don’t have this kit...I am running the Lux Lights on my JKU and even though they are very bright I have found that 6 lights per side (front, rear, wheel wells, and one under each door) work well. Maybe 2 of the 6 light kits would solve your not enough cable and more side light issues. One control box on the left and one control box on the right. What’s also nice about the Lux Lights...no drilling, they’re magnetic. Makes it easier to move the light for those night repairs. Enjoy your videos!!! Keep ‘em coming.
The lux kit is nice for sure! I didn’t need anything too fancy since I already had the white LEDs. One light under each door is a great idea on the 4 doors since the wheelbase is so long. Thanks for watching and thanks for the comment!
You do a great job with your videos....Instead of self tapping screws you should consider rivnuts….they work awesome and come in a variety of sizes....When you install JCR rock sliders you have to use some fairly large ones, but they have small ones for this application too.
Love rock lights. Was thinking of getting some RGB ones installed for style. I started with 4 KC Cyclones, now I have 18 installed.. when I hit the trail its like day time lol! Good video bro!
It turned out well but you could have mounted the control module in the center of the Jeep this gives you 11ft from center of the vehicle which you could have done the rear bumper lights as you wanted just need to splice and shrink the wire to run power to the front . Keep up the good work nice video
I was wondering bout a rocker switch with them. He said the light stays on if you don’t turn it off in the app so if you leave it on and run it to a switch that should turn them on and off, correct?
So if they stay powered on if you disconnect the bluetooth, I guess you could run them through an sPod type panel and utilize a switch? Then be done with the phone unless you wanted to change colors?
This might be too much to ask... but would you be willing to give it a try? Perhaps have your lights powered on and then disconnect the wire from the battery, waiting a moment or three, reattaching to the battery and see the result? It is essentially what a switch does, right? I would appreciate it if you could take 5 minutes to try it out! Thanks for responding!
Awesome job thank you. 2 questions. 2014 JKU. If adding extension wires, would you add 3? One for back bumper and one for each rear wheel well. Second question, you mounted the controller inside engine bay against fire wall? Thank you!
Depending on where you mount the controller is what will make you need the extensions. If you mount it in the engine bay like I did then yes you will need 3, but then again I made it work without any extensions. But with extensions it will be easier to place the lights exactly where you want them
That would probably work, I might in the future. I just wanted to finish up this video haha. Someone pointed out to me that they sell extension wires so that is also an option
Enjoying your videos, Just purchased my 3rd wrangler 87 YJ, 04 Rubicon, now a 2017 Rubicon. Bought it with lift, winch and 35” tires. Looking for a few more things for it. How are the rock lights working out? Any burn out or get caught on rocks? Thanks for serving your country Navy veteran 79-85 Thanks
1). all lights combined what's the amps? I believe the s switches have a max 30 amp per switch on the base unit (I'm not sure but I think the 4x4spod is 30 amp max per switch, with 100 amp max per unit). I would want to hook this up to that and use one switch for all of them. 2). Is there a trigger option? I would want them to come on when I unlock the doors and when I want to turn them on to see something.
Coin Collecting With Superneo123 well that pretty much answers my question. Lots of complaints about the longevity of this. But Ben seems to have gotten a great set. I’ll try them out.
Another great video! I have the KC-Hilite rgb rock lights. I haven't installed them yet. They look very similar and work the same way. Do you know if you can turn them on and off with a switch panel instead of using a phone?
does wiring directly to battery kill your battery? Or only when they are turned on thru the app? So if you turn off on the app, they do not kill battery?
Hey Ben, how have these held up for you? Bought a set of these about a week ago, and they worked perfect for the first 2 days and then stopped connecting to the bluetooth. I really liked them, and just assumed it might have been a problem with my particular set, so probably going to return and order a new set, but want to see if it's worth it. Thanks in advance!
Man.. Those are going to ROCK the mall parking lots! I know you ACTUALLY wheel your Jeep but you're not starting to swing towards the tuner crowd are you?
There’s really not much to show, just wired up some pod lights and mounted them, and then used some bolt led style lights for the wheel wells, but honestly idk if they are worth it because they only save you like 10$
Awesome man. I was gonna buy the kc hilights but I like your set up better. If you don’t mind I’ll share it with our Jeep club on Facebook. If you want you can join and post yourself. I have crawl tv and autoedit as members so they can do the same. Club is Wicked Jeeps New Mexico.
Dang it this says it is currently unavailable! I have Oracle Rock lights on my 18 JL Wrangler. I do not like them because the red bluetooth light on each one makes the lights off colored!
I would contact them on amazon and see if they will send you another set ? I know the app does have a brightness setting, make sure it’s not turned down
@@JKGearandGadgets would you recommend a different one? If I have no other switches just connecting red/black to battery I do need the inline fuse correct? Stright ran wouldnt be advised?
I know exactly how lol. There’s 4 wires inside the insulation… didn’t want to waste my time splicing and extending 4 rgb rock light wires when they worked perfectly fine were they were at. Thanks for the comment.
🇺🇸 Thanks brother and I do not have to pay with this video and I can do it charged me 400 to install 🇪🇸 Gracias hermano ya no tengo que pagar con este video y lo puedo hacer me cobraban 400 por instalaro que pagar con este video y lo puedo hacer me cobraban 400 por instalaro
Auxbeam RGB Lights: amzn.to/2ucGt5o
Extension wires: amzn.to/2JgSDyP
i know I'm kind of off topic but does anybody know of a good website to watch newly released movies online?
Sweet upgrade. The red makes the jeep look badassssss
I can’t wait see them out on the trails.
They will be on pink for sure
I did a similar light. I found it easier to use self tapping screws than the bolts in the kit.
So I just did this on my jeep. I mounted the controller under the center console inside the Jeep and had all the wires come out through the e-brake cable so this way I would have enough wire coming from every light to go wherever I want on the Jeep and just extended the wires from my controller to my battery
Great video! Color options are always fun to have
go team rugged. also bought these and love them they hold up to all the water and mud I put them through!
Love the red 🔥
It might sound lame but it think it would be pretty cool inside the cab as well.
I’ve seen that and yes it does look pretty cool!
Steinjagar tube doors! I worked for them for a while 😅 drove their semi truck to jeep shows
Awesome. I don’t have this kit...I am running the Lux Lights on my JKU and even though they are very bright I have found that 6 lights per side (front, rear, wheel wells, and one under each door) work well. Maybe 2 of the 6 light kits would solve your not enough cable and more side light issues. One control box on the left and one control box on the right. What’s also nice about the Lux Lights...no drilling, they’re magnetic. Makes it easier to move the light for those night repairs.
Enjoy your videos!!! Keep ‘em coming.
The lux kit is nice for sure! I didn’t need anything too fancy since I already had the white LEDs. One light under each door is a great idea on the 4 doors since the wheelbase is so long. Thanks for watching and thanks for the comment!
I’m waiting for your dual kit 12 light install video. Hahaa...
Love your Jeep and the vids!!!
Cool, I like the way those RGBs throw the light, colors might be cool for camping.
I believe they do sell extension cables if you want to mount them further away
You do a great job with your videos....Instead of self tapping screws you should consider rivnuts….they work awesome and come in a variety of sizes....When you install JCR rock sliders you have to use some fairly large ones, but they have small ones for this application too.
That’s a great idea! I wouldn’t have thought of that
Love rock lights. Was thinking of getting some RGB ones installed for style. I started with 4 KC Cyclones, now I have 18 installed.. when I hit the trail its like day time lol! Good video bro!
18??? Holy cow
LOL - ya it got out of hand. One of my to-do's is a lighting walk around video
It turned out well but you could have mounted the control module in the center of the Jeep this gives you 11ft from center of the vehicle which you could have done the rear bumper lights as you wanted just need to splice and shrink the wire to run power to the front . Keep up the good work nice video
I got a similar setup and added a rocker switch. When i turn it off and on its back to where it was before I switched it off.
I was wondering bout a rocker switch with them. He said the light stays on if you don’t turn it off in the app so if you leave it on and run it to a switch that should turn them on and off, correct?
@@Foilsurfboards yes that is what im doing and when I turn mine on it returns to the previous state before switching off
Thanks for the video. Just got mine and look forward to the install.
Goodluck!
Awesome.
I'm just now seeing this video. Are these still available anywhere? Your link shows it's no longer available on Amazon.
So you did one on each wheel well, under each rocker, and under the front. Where is the 8th one?
Could I theoretically set them to the color I want and hard wire it to a switch instead of doing it through the phone?
I can't wait for one year durability test review
Still working well!
So if they stay powered on if you disconnect the bluetooth, I guess you could run them through an sPod type panel and utilize a switch? Then be done with the phone unless you wanted to change colors?
Yeah that would work, pretty much just disconnect the power to them.
If you did this, when you flipped the switch back on, would it still be on and on the "default"/last used color?
I’m honestly not sure. I would think so
This might be too much to ask... but would you be willing to give it a try? Perhaps have your lights powered on and then disconnect the wire from the battery, waiting a moment or three, reattaching to the battery and see the result? It is essentially what a switch does, right? I would appreciate it if you could take 5 minutes to try it out! Thanks for responding!
I’ll test tonight or tomorrow!
What size inline fuse did you use great video
I want this...Go Team Rugged
Sweet setup man. I just got a set of these and they work amazing. May I ask where you mounted you’re control box exactly?
Haven’t got around to it yet haha, been busy so it’s just sitting in the back of the engine bay
Could you tell me what kind of fuse you used?
Awesome job thank you.
2 questions. 2014 JKU.
If adding extension wires, would you add 3? One for back bumper and one for each rear wheel well.
Second question, you mounted the controller inside engine bay against fire wall?
Thank you!
Depending on where you mount the controller is what will make you need the extensions. If you mount it in the engine bay like I did then yes you will need 3, but then again I made it work without any extensions. But with extensions it will be easier to place the lights exactly where you want them
Recently bought my first ever JK and love it. FYI I've watched like 3 of your vids today alone. Lol Your awesome bro ФИΞLФVΞ
Another great video
I'd keep both. So bright
They make extension for the rgb rock lights I had to get em so my 8 pce lights would fit on my 2002 Jeep grand Cherokee
I’ll have to check that out! Wish I knew earlier haha
JK Gear and Gadgets next time then lol but u can find em on amazon
Just followed u on Instagram
Add more wire for distance
Go Team Rugged!
What if you splice and extend the wire to reach the rear?
That would probably work, I might in the future. I just wanted to finish up this video haha. Someone pointed out to me that they sell extension wires so that is also an option
When I click on link says error when redirected. Tring to order but no luck. Do u have a differnt link?
Might be able to mount the controller under the dash and get the original kit cable length to reach back bumper???
By the way, love what you have done to your Jeep and really enjoying your videos....
Go team rugged!
Enjoy your channel! Thank you
Looks good!
What size fuse did you use?
I had some mic tuning lights on my jeep, they lasted like 2 months, I had my green led go out and one of my pods actually broke off
Has anyone used a y-cable and added few more light???
Do u have a video for ur diy led setup
What amp fuse did you use for the online fuse holder?
Enjoying your videos,
Just purchased my 3rd wrangler
87 YJ, 04 Rubicon, now a 2017 Rubicon.
Bought it with lift, winch and 35” tires.
Looking for a few more things for it.
How are the rock lights working out?
Any burn out or get caught on rocks?
Thanks for serving your country
Navy veteran 79-85
Thanks
You don’t “need” a fuse, just better to have one right?
It will work without a fuse. But you need a fuse lol. Just like you don’t need to tighten your lugnuts, it just sucks when things go south.
Thanks for comparison and instructions! How do you get that Jeep So Clean ??!?
GO TEAM RUGGED!!
1). all lights combined what's the amps? I believe the s switches have a max 30 amp per switch on the base unit (I'm not sure but I think the 4x4spod is 30 amp max per switch, with 100 amp max per unit). I would want to hook this up to that and use one switch for all of them.
2). Is there a trigger option? I would want them to come on when I unlock the doors and when I want to turn them on to see something.
Man those are frickin awesome, im definitely going to get a set of those. How are they holding up after time on the trails?
They are still working great!
@@JKGearandGadgets cool i see they are 56 bucks now, even better
Coin Collecting With Superneo123 well that pretty much answers my question. Lots of complaints about the longevity of this. But Ben seems to have gotten a great set. I’ll try them out.
Nice job, thanks for sharing 😊✌🏆
Thank you!
So cool
Nice video, thanks for the review
Another great video! I have the KC-Hilite rgb rock lights. I haven't installed them yet. They look very similar and work the same way. Do you know if you can turn them on and off with a switch panel instead of using a phone?
I know that with these I can
Read my mind. So Ben you have these ran to your SPod?
does wiring directly to battery kill your battery? Or only when they are turned on thru the app? So if you turn off on the app, they do not kill battery?
Go team Rugged!!
Go team rugged!!
Website or materials do not clearly state, is the Computer module waterproof? I would like to put module under truck but unsure thx
I do not think it is waterproof unless you seal it up
@@JKGearandGadgets where did you place your module in the jeep, I think I missed that part
That's wonderful. I love it.
Hey Ben, how have these held up for you? Bought a set of these about a week ago, and they worked perfect for the first 2 days and then stopped connecting to the bluetooth. I really liked them, and just assumed it might have been a problem with my particular set, so probably going to return and order a new set, but want to see if it's worth it. Thanks in advance!
They are still working great for me, sorry to hear your having an issue
Awesome! Thanks! I'll see where I went wrong.
Where did you get the inline fuse?
Amazon, Link below, I got the pack of them since they are useful for other projects. amzn.to/2JBquTt
Man.. Those are going to ROCK the mall parking lots! I know you ACTUALLY wheel your Jeep but you're not starting to swing towards the tuner crowd are you?
Nah, I’ve just had a lot of people asking for me to do a video on an affordable rocklight setup. I don’t mind adding lights and stuff.
JK Gear and Gadgets Ahhh...I'm just kidding. But if I see a video where you're installing 24s I'm out!
That’s next week 😳
Go Team Rugged!!!
Any ideas where to order this now? Amazon says it is unavailable. Any recommendations on a different set if this one is not sold currently?
I want to see the video on the diy lights man
Andy Holguin I’ll be posting one this weekend. 👍🏽
There’s really not much to show, just wired up some pod lights and mounted them, and then used some bolt led style lights for the wheel wells, but honestly idk if they are worth it because they only save you like 10$
Awesome man. I was gonna buy the kc hilights but I like your set up better. If you don’t mind I’ll share it with our Jeep club on Facebook. If you want you can join and post yourself. I have crawl tv and autoedit as members so they can do the same. Club is Wicked Jeeps New Mexico.
Looks like you get more light with both of them
Feel free to share! Honestly no offense but I’d rather not join any more FB Jeep groups haha I’m like 15 already and I can barely keep up with those 😂
How many beers does a project like this require?
It’s a 3 corona/ 5 Miller lite. Now if you have a buddy over to help it’ll end up being a full case install 😂
JK Gear and Gadgets sounds accurate!
Just wondering how the lights are holding up. Was looking at a 8 pod set for my jku.
Dang it this says it is currently unavailable! I have Oracle Rock lights on my 18 JL Wrangler. I do not like them because the red bluetooth light on each one makes the lights off colored!
Great vid! Can you tell me the lift and size tires you went with?
4.5” lift, I don’t remember what size tires I had in this video. either 37s or 40s. Check out some of my recent vids and be sure to sub
Go team Rugged
Are they still working for you? Lots of bad reviews they stop working after a very short time.
Hey Ben. Where did you mount your rear light?
GO TEAM RUGGED!
cool
Hey Man, I am assuming you put the control box in the right-hand side of your engine compartment? near your Battery?
Yeah. I still need to find a way to mount it haha. It’s just chilling there
@@JKGearandGadgets im looking for a more centralized spot as well.
Just watched your video. I saw some bad reviews about the app. Was wondering have you had any issues with that.
On their website they specify the correct app to use. Most reviews are from people using the non updated app
Bruh..... those are sick. Wonder how insane spread I would get with 8lights on my 2dr ?
Haha on a 2 door it would probably light up the entire underneath area, would be sweet
How many amps is your fuse?
Go team rugged😋
GO TEAM RUGGED
Go TEAM RUGGED!!!!!!!!!!!!!
are they water proof?
Yes, no issues yet!
how in gods green earth did you get yours that bright, mine that aren’t bright at all
Really?? Same brand?
JK Gear and Gadgets same Auxbeam 8 pc set
I would contact them on amazon and see if they will send you another set ? I know the app does have a brightness setting, make sure it’s not turned down
JK Gear and Gadgets alright, i’ll see how that goes
Go team rugged
Should've show where you mounted the control box. I appreciate your videos.
Self Tappers So Much Easier Thats What I Did !!!
Did you use the isolator or skip that altogether?
For the inline fuse, would a 15a be ok so I dont have any issues?
Will most likely be fine.
@@JKGearandGadgets would you recommend a different one? If I have no other switches just connecting red/black to battery I do need the inline fuse correct? Stright ran wouldnt be advised?
I have a question thats off topic. Do you know how to fix an oil pressure Sensor?
On what year and model
2014 JKU sport
I want to say that is under the Intake, it’s a fairly involved process if I’m thinking correctly
Hey how is the app that you have to use to control the lights? Because I’m a little skeptical about not having a remote.
I haven’t had any issues with the app. However if you run it to a switch it will come on without the app each time power is disconnected/applie
The app would be to just change colors
JK Gear and Gadgets thanks for replying man and great video
JK Gear and Gadgets and how would I run it to a switch?
Instead of running it to the battery, put a switch/relay setup in between
Go Team Rugged
What’s the app called?? Or there website ??
Website is auxbeam.com lol. And app is RGB Remote
Go team rugged.
Go team rugged OIIIIIIIO
So you don't know how to extend your wiring ?
Bummer.
I know exactly how lol. There’s 4 wires inside the insulation… didn’t want to waste my time splicing and extending 4 rgb rock light wires when they worked perfectly fine were they were at. Thanks for the comment.
go team rugged
🇺🇸 Thanks brother and I do not have to pay with this video and I can do it charged me 400 to install
🇪🇸 Gracias hermano ya no tengo que pagar con este video y lo puedo hacer me cobraban 400 por instalaro que pagar con este video y lo puedo hacer me cobraban 400 por instalaro
Enter me in the giveaway
Go Team Rugged!