M2C Racing Goliath Chassis Full Install and Review Arrma Kraton 6s

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024
  • To Support 3 Sons RC stop by out Patreon page, read our "About" message!!
    www.patreon.co...
    Appreciate your Consideration OR even just stopping by to READ what we are about!!
    Full Upgrades Listed Below
    M2c Racing Goliath Chassis Review and full Install Arrma Kraton⚒️🔨
    Thanks to Mitch Looper and the whole M2C Racing team for making just Super Tough upgrades for our Arrma Vehicles so we can "Go to the Moon!!"🚀🚀🚀😜
    If you like Bashing, Reviews, and Tec tips, consider Subscribing.... Really helps 🙌👍😉
    Kraton Upgraded parts🚀🚀🚀
    M2C FTW🎯
    M2C Goliath Chassis
    m2cracing.net/...
    M2C Shock Towers
    m2cracing.net/...
    M2C Chassis Braces
    m2cracing.net/...
    M2C Upper Hinge pin block kit
    m2cracing.net/...
    M2C Hinge Pin kits
    m2cracing.net/...
    M2C Tower Support
    m2cracing.net/...
    -RPM Arms
    -Fast Eddie Bearings
    -Red Annodized Servo Mount Ebay
    -Zoskay DS3230 Servo

ความคิดเห็น • 57

  • @richduperbash2966
    @richduperbash2966 4 ปีที่แล้ว +2

    Great how to Brother 😱!!!! M2C for the win 😍. Appreciate the mention too. Very kind of you🍻😎💪👊👊

    • @3SonsRC
      @3SonsRC  4 ปีที่แล้ว +1

      Thanks for stopping by brother Rich,
      Just figgured I should do one to help the community.
      Rock on big bopper and stay safe
      🚀🚀🚀
      Now the real sends start 😉✈️

    • @westleyclayton5872
      @westleyclayton5872 3 ปีที่แล้ว

      sorry to be offtopic but does someone know of a trick to get back into an instagram account?
      I stupidly lost my password. I love any tips you can give me.

    • @javierariel6206
      @javierariel6206 3 ปีที่แล้ว

      @Westley Clayton instablaster :)

    • @westleyclayton5872
      @westleyclayton5872 3 ปีที่แล้ว

      @Javier Ariel Thanks for your reply. I got to the site through google and im trying it out atm.
      Seems to take a while so I will get back to you later with my results.

    • @westleyclayton5872
      @westleyclayton5872 3 ปีที่แล้ว

      @Javier Ariel it did the trick and I now got access to my account again. I'm so happy!
      Thanks so much you really help me out !

  • @CommanderAstigRC
    @CommanderAstigRC 4 ปีที่แล้ว +2

    Great bench video brother. Great tips and how-to. Thanks for sharing bro. M2C chassis is no doubt a game charger and confidence booster for anybody wants to get hardcore in the bashing game! Balls to the Walls!

    • @3SonsRC
      @3SonsRC  4 ปีที่แล้ว +1

      Yeah buddy, thanks for your kind words and support! No fear sends coming up!!! 😏😜🚀🚀🚀

  • @RCDUDE81
    @RCDUDE81 4 ปีที่แล้ว +2

    Spectacular how to and tips vid Bro!!👊Nice of you to take the time to explain critical info that a lot of people may not know. Especially that are new to the hobby!👍The M2C chassis alone is a game changer in keeping the rig together! Paired with the other goodies, You've gone full beefcake!!💪🚀🚀Thanks for the mention and keep sending it!!😎🍻🤘🤘👊

    • @3SonsRC
      @3SonsRC  4 ปีที่แล้ว

      Thanks brother Eric, 🙌 for the kind words. Yeah the Goliath is a game changer, went out to bash it for the first time yesterday and I must have had a small tear in my BRAND NEW Backflips and ripped open the foams and somehow my pinion slipped (more loctite) durring warm up, so my day was over before first launch unfortunately 💔😢
      Gonna have to bash it twice as hard next time then 🚀🚀.... Lets see if this glue holds on the tire 😜.... Got the black rubberized kind so 🤞
      (Lesson:Always bring backup tires😏)
      You find the Backflip LP more durable than the MT's?

  • @michaelallsbrook468
    @michaelallsbrook468 4 ปีที่แล้ว +1

    Good luck on your build Saturday Mr. Mitch!! I know it’s going to be awesome! Wanted to thank you for your ideas & tequniques. You’re the best!!

    • @3SonsRC
      @3SonsRC  4 ปีที่แล้ว +1

      Appreciate your time buddy. Thanks for the positive feedback and support. Looking forward to seeing Mitch and the whole team on Saturday also!

  • @EastTactics
    @EastTactics 4 ปีที่แล้ว +1

    Best upgrade ... bar none!!! Excellent video bro

    • @3SonsRC
      @3SonsRC  4 ปีที่แล้ว +1

      Thanks buddy....agreed! Appreciate your time

  • @GreatLakesRC
    @GreatLakesRC 4 ปีที่แล้ว +1

    Welcome to the M2C test team 🤩

    • @3SonsRC
      @3SonsRC  4 ปีที่แล้ว +1

      Thanks buddy!
      Super honored 😁

  • @UpIllusions
    @UpIllusions 2 ปีที่แล้ว +1

    Love M2c but the new updated M2c chassis don’t support the rpm arms with the droop screws.

    • @3SonsRC
      @3SonsRC  2 ปีที่แล้ว +1

      Correct.... But this was a Arrma update to the chassis that M2C followed of course for compatibility.... RPM was the one who didn't update there arms (until just now) to keep up with Arrma and M2C 😩.... Lazy RPM waited 2 years to update their arms to match Arrma v4/v5 chassis.... So you can now with new RPM arms or Arrma v4/v5 arms.
      You might know all this already.
      Appreciate your time and support friend.
      Hope your enjoying the channel, see ya round brother

  • @Anton-gz1go
    @Anton-gz1go 3 ปีที่แล้ว +2

    Nice! I am getting one for Christmas. Does it fit on an exb kraton 1/8 or do you need a different chassis?

    • @3SonsRC
      @3SonsRC  3 ปีที่แล้ว +1

      Thanks brother,
      If your replacing the EXB chassis get the v2 kraton Chassis or the front arms and droop screws won't match up right. This is a v3 Kraton so I got the older Kraton Chassis.
      Hope your enjoying the channel my man,
      See ya round

  • @DonnieKluck
    @DonnieKluck 3 ปีที่แล้ว +1

    Been binge watching your videos buddy, going to have to watch them all again before I try to do my build. Would you recommend that when I disassemble the EXB to transfer everything over to M2C chassis, should I just build the front end out with all the beefcake parts or should I assemble EXB onto M2C chassis then do the individual beefcake components?

    • @3SonsRC
      @3SonsRC  3 ปีที่แล้ว +2

      I understand it's a lot.
      Do it in sections, front end off in chunk, put all the bits on, rear end off put all the bits on rear, transfer all chassis stuff to the new chassis with M2C braces, then add the front and rear back on.... It makes more sence as you do it, seems intimidating but if you pay attention you will learn a ton and makes more sense as you go.
      Good luck brother

  • @islandrc-duke1972
    @islandrc-duke1972 4 ปีที่แล้ว +1

    great upgrade and review

    • @3SonsRC
      @3SonsRC  4 ปีที่แล้ว +1

      Appreciate that buddy.... Thanks for coming by

  • @joshlopez6075
    @joshlopez6075 ปีที่แล้ว +1

    with this chassis you dont need the center to center tower brace?

    • @3SonsRC
      @3SonsRC  ปีที่แล้ว +2

      Not really, you can if you want extra peace of mind but almost impossible to bend a M2C Chassis.... You send it 50ft vertical and take nosers over and over you may very so slightly bend it. I use a center on my Kraton XL build and Talion that my son uses. I don't think Rich or Eric run one either.
      Bash on brother

  • @natehogan8376
    @natehogan8376 3 ปีที่แล้ว +1

    So, I am running the stock number on my kraton with the rpm bumber bolted directly over stock one, will I need to use that delrin plate still? Thanks. Appreciate your video!

    • @3SonsRC
      @3SonsRC  3 ปีที่แล้ว

      Yes,
      The plate is to be used for all aftermarket bumpers to fill small gap, the stock bumper automatically fills it. It's not a big deal but the install is cleaner with it.
      Glad you enjoyed the video and hope you are enjoying the channel
      See ya round brother

    • @3SonsRC
      @3SonsRC  3 ปีที่แล้ว +1

      Sorry, just reread that.... If you do that you won't need the extra Delrin

  • @jordannovek2911
    @jordannovek2911 3 ปีที่แล้ว +1

    I ordered the chassis but its not the same . Hope it works in my exb. Maybe I got an older version . Im worried about the droop screw ears, they look more rounded and may restrict movement of the suspension arms. Peace !

    • @3SonsRC
      @3SonsRC  3 ปีที่แล้ว +1

      Not sure which one ya got, new one matches EXB/v5 geometry. But if your using RPM arms the droop holes will only come close to matching if you use M2C Droop Screws because of the bigger mushroom.
      Issue is RPM droop holes are wrong, they don't line up to v4/v5/or exb holes.... They kinda worked with the old chassis but Mitch tried to do his best to balance between droop holes for stock v4 or v5/EXB droop holes... Was impossible to make it match perfectly for all three because RPM can't figgure out where to put droop holes correctly. So Mitch will always lean towards matching stock, he can't be responsible for every aftermarket company screwing things up😮
      Sounds rough but it's very difficult as an aftermarket company (M2C) to make parts to match other aftermarket mistakes.... Hope that makes sence. I don't work for M2C just a Tester... Just trying to help

    • @jordannovek2911
      @jordannovek2911 3 ปีที่แล้ว +1

      @@3SonsRC Thanks. I really appreciate your response. It helped clear that up. Im sticking with stock exb arms. 👍✌️

  • @travisdrury5556
    @travisdrury5556 3 ปีที่แล้ว +1

    So dont leave tower to tower brace on?

    • @3SonsRC
      @3SonsRC  3 ปีที่แล้ว +1

      Good question
      You can but it's absolutely not necessary with M2C Chassis, especially if your all M2C Beefcake. On all my M2C Chassis rigs (Kraton, Talion, Outcast) I don't run a tower to tower.
      Thanks for your time brother

  • @travisdrury5556
    @travisdrury5556 3 ปีที่แล้ว +1

    I just got chasis the part for front bumper if im using typhon bumper with rpm bumper do i need to use that piece?

    • @3SonsRC
      @3SonsRC  3 ปีที่แล้ว +1

      You talking about the little plastic piece? It goes between the bumper and the chassis, if your going stock you don't need it, as far as I know anything aftermarket there will be a slight gap... This fills it, so I believe you should use it. It does not make a big difference at all, just makes it a little more flush👍
      Appreciate your time brother.... Bash on!

    • @travisdrury5556
      @travisdrury5556 3 ปีที่แล้ว

      @@3SonsRC ill find out for sure when i get it put back together but using stock typhon bumper to hold hinge pins in then have rpm bumper

  •  4 ปีที่แล้ว +1

    What are those chassi side guards?

    • @3SonsRC
      @3SonsRC  4 ปีที่แล้ว +1

      Those are the stock Outcast side guards... I use them on all my rigs, they work fine on the Kraton, keep more dust and stuff out. I think you have to dremmel a bit off the end.... Pretty simple.
      Thanks for your time and appreciate the Support/Sub🙌

    •  4 ปีที่แล้ว +1

      3 Sons RC nice 👍🏼

  • @kennethaddis7420
    @kennethaddis7420 3 ปีที่แล้ว

    Say someone wanted a LWB Notorious 6s V5 this chassis should let you bolt everything up im guessing. If not are they a LWB kit?
    Thanks Kenneth

    • @3SonsRC
      @3SonsRC  3 ปีที่แล้ว

      Thanks for watching Kenneth
      Sorry in having a hard time understanding what exactly you are asking

    • @kennethaddis7420
      @kennethaddis7420 3 ปีที่แล้ว +1

      @@3SonsRC i have a Notorious 6s V5 stunt truck 100% factory. The only problem is where I live the town has no stop lights. 2 hours to the closest bmx park. I was curious if my Notorious parts diffs a arms all would bolt up to the factory holes for a kraton frame. I know i would need longer drive shafts and tower to frame brackets. Just to extend the lenght of the truck.

    • @3SonsRC
      @3SonsRC  3 ปีที่แล้ว

      Yes brother they are basically the same besides the longer drive shafts and center braces, you will basically have a Kraton. So not only will you need a longer center brace (single top one) you will need a different rear center brace

    • @kennethaddis7420
      @kennethaddis7420 3 ปีที่แล้ว +1

      Thanks so very much. I appreciate your reply

  • @1972bmac
    @1972bmac 4 ปีที่แล้ว +1

    Will this chassis work on the V5?

    • @3SonsRC
      @3SonsRC  4 ปีที่แล้ว +1

      Yes.... The chassis has already been redone to match up with EXB Arms and droop, I will check with Mitch if that's the one they are currently shipping..... Good question!
      Appreciate your time brother

    • @3SonsRC
      @3SonsRC  4 ปีที่แล้ว +1

      Yes,
      Mitch confirmed the one currently shipping is compatible

    • @1972bmac
      @1972bmac 4 ปีที่แล้ว +1

      @@3SonsRC Thanks man

  • @oscar_rc_basher7038
    @oscar_rc_basher7038 4 ปีที่แล้ว +2

    Nice vid

    • @3SonsRC
      @3SonsRC  4 ปีที่แล้ว +2

      Thanks man appreciate the kind words, support/Sub and for your time buddy

  • @Backyardwrenching1243
    @Backyardwrenching1243 4 ปีที่แล้ว +1

    super!

  • @KurtsRCs
    @KurtsRCs 4 ปีที่แล้ว +1

    Great video and how to

    • @3SonsRC
      @3SonsRC  4 ปีที่แล้ว +1

      Thanks man, appreciate that,
      Stay safe brother 😉🙌