Good idea, but you should run an offset piece of tape parallel to the edge and pull that tape just after wiping the seam sealer with the spreader. It would leave a clean bead edge with no need to clean or sand the squeezout/residue off afterwards. Sanding the excess seam sealer off would likely expose bare metal that would need priming if the seam sealer was applied over e-coat.
Sam you are correct. In some field studies people pulled the tape off and created more difficulty by creating a secondary sharp edge or even removing or disturbing the bead while pulling the tape. Getting the tape just right can be tricky. You are correct if metal was to be exposed topcoating the bare metal with an appropriate 2K epoxy primer or sealer would be necessary prior to base clear application.
Good morning, very clever technique, using a modified body filler. Thanks for the videos with all of the clever tricks, tips and techniques. Always alot of expertise.
How would you do a item siverado 2017 n up fender having a hard time. Getting that thick bead. Maybe it’s the seam seam I’m using wurth the heavy body but am temped you try this 3m heavy body one can it go over bear metal?
i dont mean to be off topic but does anybody know a method to get back into an Instagram account? I stupidly lost my password. I appreciate any tips you can offer me
@Chance Kaiser Thanks so much for your reply. I found the site on google and Im trying it out atm. Takes a while so I will get back to you later with my results.
Good idea, but you should run an offset piece of tape parallel to the edge and pull that tape just after wiping the seam sealer with the spreader. It would leave a clean bead edge with no need to clean or sand the squeezout/residue off afterwards. Sanding the excess seam sealer off would likely expose bare metal that would need priming if the seam sealer was applied over e-coat.
Sam you are correct. In some field studies people pulled the tape off and created more difficulty by creating a secondary sharp edge or even removing or disturbing the bead while pulling the tape. Getting the tape just right can be tricky. You are correct if metal was to be exposed topcoating the bare metal with an appropriate 2K epoxy primer or sealer would be necessary prior to base clear application.
Good morning, very clever technique, using a modified body filler. Thanks for the videos with all of the clever tricks, tips and techniques. Always alot of expertise.
Thanks for watching! More tips and tricks videos coming soon.
How would you do a item siverado 2017 n up fender having a hard time. Getting that thick bead. Maybe it’s the seam seam I’m using wurth the heavy body but am temped you try this 3m heavy body one can it go over bear metal?
Great video Ryan! Clear and easy-to-follow directions for replicating an OEM’s Sean sealer appearance.
i dont mean to be off topic but does anybody know a method to get back into an Instagram account?
I stupidly lost my password. I appreciate any tips you can offer me
@Preston Jasper Instablaster :)
@Chance Kaiser Thanks so much for your reply. I found the site on google and Im trying it out atm.
Takes a while so I will get back to you later with my results.
@Chance Kaiser It worked and I actually got access to my account again. Im so happy:D
Thanks so much, you saved my account !
@Preston Jasper glad I could help xD
Is it available in white. Such that I would not need to paint on a white van?
Hello, the Heavy-Bodied Seam Sealer is only available in black.
Add tape