DIY Amazing Mini Drill Press
ฝัง
- เผยแพร่เมื่อ 30 มิ.ย. 2023
- Incredible Homemade Mini Drill Press. Hello, friends! I'm excited to share with you the results of my latest project. I have just completed work on the smallest drill press in my collection. This drilling machine turned out to be extremely compact, simple, yet challenging to create due to the meticulous attention to detail required during the manufacturing process. I crafted almost all the parts on a lathe, allowing my imagination to run wild. As is tradition, I utilized various salvaged materials found in my workshop, giving the mini drill press a unique and artistic touch.
The outcome surpassed my expectations, resulting in a beautiful and fully functional mini drill press. To power it, I chose a 24-volt DC motor, which provides ample power and efficiency for its operation.
I want to express my sincere gratitude to all of you for your support. Please share this video, leave comments, and show your appreciation with likes. Your engagement and feedback fuel my drive to continually improve and pursue creative endeavors.
Once again, thank you all for your support. Each and every one of you is greatly appreciated. Let's keep sharing inspiration and joy in our creative pursuits. Thank you, everyone!
#serengy #serengytechnology #minidrillpress #drillpress
Step 1, get an industrial lathe. Yeah, definitely DIY lol
Thanks friend for your support
I thought the same thing...lol.
The use of the lathe was completely unnecessary if you have a drill. I would guess it would be easier and faster without the lathe.
* The feet could have been 4 nuts.
* The two clamps could have been metal blocks with holes drilled in them a slot hand-sawed into them. Starting from round stock was actually weird andd wasteful if you have square stock. You could make them from hardwood, too.
* The large wooden block could have just been drilled and sawn/chiseled.
* The gear axle, which they didn't show being made, could be any rod.
perfect creatıve
Симпатичный сверлильный станок получился 👍
First time I've ever seen someone cut a flat surface on a lathe or cut a slot. Nicely done. Learned something new about them. And it's a nice drill to be added to your work bench.
Thanks friend for your support
Think its called a key way slot.
Классный станочек получился.
Спасибо. У меня на канале есть еще один
Nice. Thanks so much
bellissimo video
I love it. Super cool drill press. Fantastic build.
Super video mate
Thanks a lot buddy
Lathe master video😍🥰
Fantastic!
I am fascinated by the fully functional and cute miniatures.
Thank you friend.
Amazing..👍🏻 I wish I can buy 1.
I salute your engineering skills and creativity
Thank you friend.
homemade, but shop made.
Sangat suka dengan kreatifitas dan hasilnya luarbiasa (Indonesia). 👍
Thanks friend for your support
Excellent.
Thanks friend
9/10. I would have given 10/10 if you had run the power cable down the metal tube and out the base. Fab job, though!
Muito bacana, sucessos querido
Good job my friend 👏👍👏
thank you very much friend
@@serengytechMake a scroll saw machine.
This is what engineers do, we find a way. And if he had had a four jaw chuck for his lathe, the piece would have run central and save extra slide travel. My horrible step mother sold my lathe and tools, while I was in the Army. That was a nice little project, and I am sure you enjoyed it. Thanks for sharing it with us.
Thanks friend for your support
@@serengytech your welcome, more please
Qué bárbaro! 👍⭐⭐⭐⭐⭐💥😁💯
Fantástico! Vou tentar construir uma parecida, para uso em minha oficina de relógios de parede. Se ficar boa mostro o resultado. Agradeço pela inspiração.
Thank you friend for your support. It will be interesting to see
Классный станочек вышел. Удачи в делах
Спасибо
just make one and i'll buy it.
The power cable should have organised well. Otherwise, it's super fancy...👍👍
Thank you friend.
Top desain.👍💯
Would be ideal for drilling clock bushes 👍
Thank you. Very handy for small jobs.
Good invention❤😊
Очень хорошо!
Спасибо
Show ,fantástico!!!!!!!
Thanks buddy
Not what I would call DIY, when I need a lathe to make most of the parts for the Mini Drill......
lmao, good point... nevertheless this guy is very talented
I think this is stil diy, because for most part are self made not store bought ready that need little assembly like Ikea
Next video: making DIY lathe with lathe
You just have to think a little. The use of the lathe was completely unnecessary if you have a drill. I would guess it would be easier and faster without the lathe.
* The feet could have been 4 nuts.
* The two clamps could have been metal blocks with holes drilled in them a slot hand-sawed into them. Starting from round stock was actually weird andd wasteful if you have square stock. You could make them from hardwood, too.
* The large wooden block could have just been drilled and sawn/chiseled.
* The gear axle, which they didn't show being made, could be any rod.
I live just 3 minutes drive to a home depot....I'll just buy one...no problem....guaranteed.
Nice project keep it on 🎉🎉
Brilliant!
Thank you
This is great again. Thank you
Superbe reproduction d'une vraie à l'identique 👌👌👌👌
Thanks a lot
Amazing build 😍😍😍❤️🎉👍
Thanks a lot
Top demais 👏😻
Thanks a lot
@@serengytechcan i but that??
Sensacional!
👍
Achei bem interessante o projeto. Amanha vou ali no boteco comprar uma maquina de torno pra fazer um trco desse ai.
Absolutamente FANTASTICO. El manejo del torno, la calidad de las piezas...TODO ESPECTACULAR...FELICITACIONES
Thanks a lot friend
Прелесть!!!
Si te decidieras a venderlos, compraría uno. Para el modelismo me parece interesante.
Me puedo poner en contacto contigo?
Unfortunately, I'm not selling anything right now. maybe in the future
Meus parabéns ficou muinto boa é bom para fazer gaiola de passarinho ❤
Betul alat ini dibutuhkan pengrajin sangkar burung
Super craftsmanship I wish one more for me
Thank you friend.
Гениально! Мал золотник - да дорог.
Спасибо
Good work
Thanks a lot
🤠👉👍👍👍☺️ me gustó maquinita trozar madera 👍👍👍☺️🙋
Thank you friend.
Good 👍 the best
You are stuck in a room with lots of materials and a lathe only. This video should be the entrance of that kind of movie...
Eres muy bueno, buen trabajo, saludos.
Thank you
Love it
Thanks a lot
@@serengytech make a mini lathe next please
Lovely work! ❤
Thank you
Good job
Thanks a lot.
Можно отрезанной частью винты вкрутить/вклеить в ножки (для эстетики), добавить силиконовые накладки для уменьшения скольжения и вибрации.
Не хватает ограничителя нижнего положения или сквозного отверстия в станине.
Хорошая идея. Отверстия я специально не стал делать. Подразумевалось сверлить на подкладке. Но отверстие всегда можно сделать
Mantap 👍👍👍👍👍
Good 👍 👍 👍 👍 👍
👍👍👍👍
Para construir las herramientas que proponen, se requiere de un taller muy completo con máquinas-herramientas de valor. Si se tiene ese taller seguro que podes comprar esa herramienta en vez de fabricarla.
It's fun to create with your own hands. it's a hobby
Você é fera mano 👏
Thank you
WOW that is quite amazing, in no way do I 1) have the tools to make that 2) have the skill to make that but I would buy one if they were for sale. Good job.
Unfortunately, I'm not selling anything right now. maybe in the future
👏👏👏 x 1000
I like it! nice idea but not many of us have a metal lathe to make the parts unfortunately.
What ever he has done on the Lathe can be done by hand. so stop crying and put in some shoulder work.
Don't be put off, as the lathe was completely unnecessary if you have a drill. I would guess it would be easier and faster without the lathe.
* The feet could have been 4 nuts.
* The two clamps could have been metal blocks with holes drilled in them a slot hand-sawed into them. Starting from round stock was actually weird andd wasteful if you have square stock. You could make them from hardwood, too.
* The large wooden block could have just been drilled and sawn/chiseled.
* The gear axle, which they didn't show being made, could be any rod.
Fantastic, but it would be better if you shared a list of parts and an assembly diagram with measurements.
Милота😃👍
Спасибо. Иду по пути уменьшения
Yeah! That will do nicely. A lot more power than I had guessed. I liked the way you basically made it a kit you put together at the end instead of having it built out over the course of the video. Very COoL. p.s. I wonder if adding a small "flywheel weight" just above the chuck- at the brass coupling,would smooth it out even more. Blaw blaw. I shouldn't mess with perfection. Cheers from So.CA.USA 3rd House On the Right. SUBBED!
Thanks friend for your support
That is so cool.
Thanks friend for your support
Great drill .Maybe add a large hole to base metal for protect drill bit (So much down) or drill down limiter
Thank you very much. good idea
fantastico
Thanks a lot
Өте керемет шыққан кішкентай тескіш станок күшті
thank you very much
Homemade?!!! Who has a lathe at home??
I have two lathes at home
You dont need one if you think about this at all. The use of the lathe was completely unnecessary if you have a drill. I would guess it would be easier and faster without the lathe.
* The feet could have been 4 nuts.
* The two clamps could have been metal blocks with holes drilled in them a slot hand-sawed into them. Starting from round stock was actually weird andd wasteful if you have square stock. You could make them from hardwood, too.
* The large wooden block could have just been drilled and sawn/chiseled.
* The gear axle, which they didn't show being made, could be any rod.
🇧🇷👍🏼Ótimo trabalho, muito profissional, aonde está a loja para comprar o meu.
Unfortunately I don't sell anything right now. possibly in the future
Привет👋
Круто новое долгожданое видео.адабрямсс.
Спасибо дружище
Me gusta mucho esa miniatura
thank you friend
Nice work bro
Thank you friend.
genial
I need this so bad
Unfortunately, I'm not selling anything right now. maybe in the future
Beautiful work. Definitely wouldn’t be able to afford the Maxon brand DC motor to power it.
Thanks buddy for your support.
💗
What are the chances i could bribe you to make me one of these? I've never seen ingenuity and craftsmanship like yours. Thanks for the inspiration. That impregnated wood is a well kept secret from us westerners 😊. I have a block of it in black i use for ship model planking. Amazing stuff!
Thank you very much for your interest. Unfortunately, I'm not selling anything right now. Maybe in the future.
👍👌👏👏🙌
ドリルプレス…日本ではボール盤とも呼びますが、このサイズでちゃんと使える物を作り上げたのは凄いですね🇯🇵
Со стороны сложилось впечатление ,,, что вы долго прожили в этой стране что боитесь писать на родном языке (шифруетесь)
Serengy en cuanto vendes mini taladro se ve muy práctico para hacer uno está complicado porque no hay esas herramientas. Porque hay ideas pero se carece de herramienta para hacerlo muchas gracias por esos tutoriales que Dios te bendiga desde Querétaro Qro. México saludos
Thank you
Muy buen trabajo lo felicito vende este producto?
Unfortunately, I'm not selling anything right now. maybe in the future
Well done, sir. This would be a perfect addition to my jeweler's bench.
Thanks a lot
Tyy
😘
Здорово
👍👍👍
🤠👉👍👍👍👈🙋🤝🤝🤝 me gustó me gusta papaya Chile
Из головок болтов ножки можно было сделать, просто в дрель, в патрон зажать и напильником, лишнее отрезать и точку сварки, и штанга так-же..
как вариант можно. уже сделал так)) спасибо
@@serengytech думаю что если движок от шуруповерта или дрели двшманской впринципе неплохой аппарат получается, только чуть больше..
Сделано в лнр)))
Very nice invention, but Not a possible diy for the average home/garage worker.
Thanks friend for your support
Because of the lathe? The use of the lathe was actually unnecessary if you have a drill. I would guess it would be easier and faster without the lathe.
* The feet could have been 4 nuts.
* The two clamps could have been metal blocks with holes drilled in them a slot hand-sawed into them. Starting from round stock was actually weird andd wasteful if you have square stock. You could make them from hardwood, too.
* The large wooden block could have just been drilled and sawn/chiseled.
* The gear axle, which they didn't show being made, could be any rod.
I wonder how it would have gone, if you had just used the lathe to cut off the screw heads of the feet, once secured in them, before cutting off the feet? Might have given a cleaner end, that oh could have also slightly chamfered. Ideas for the future.
It is possible on the machine. but so much faster.
Nice one, but screwing directly into MDF, probably won't last too long…
This is not MDF. this is textolite. Material impregnated with resin, very strong. No worse than aluminum in strength.
It just looks porous, as for the sawdust from it. I somewhat doubt an M3 screw will get a good grip there. @@serengytech
DIY? Yeah, let me bust out a metal lathe from my pocket to make custom parts. LOL
MINI PERCEUSE A COLONNE DU MONDE ?????
Next PROJECTS mini lathe..
Good idea
красава, чё!
Si pero es más increíble conseguir Blas piezas
🎉🎉🎉🎉🎉🎉🎉🎉
DESDEPERU BUENAS TARDES CONOZCO FIERECILLAS PERO CÓMO UD. NO. MIS FELICITACIONES BENDICIONES Y GRACIAS.
Thanks a lot. Hello Peru
@@serengytech Y UNA PREGUNTA MALCRIADA ACEPTA PEDIDOS. .DISCULPE
@@ramonbuenosaravia625 Unfortunately I don't sell anything right now. possibly in the future
@@serengytech NO SE INGLÉS
@@serengytech SÓLO ENTIENDO UNA PALABRA SON SUS DERECHOS. TIENE Q REGISTRAR O PATENTAR ES ASI Y NO LO VUELVO A QUITARLES. SU VALIOSO TIEMPO
Selam ustam güzel bir çalışma olmuş projelerin çizimlerini nerden buluyorsun
Thank you very much for your interest. Unfortunately I didn't make any drawings.